Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids (ISO 4404-2:2003)

ISO 4404-2:2003 specifies a procedure for the determination of the corrosion-inhibiting properties of non-aqueous hydraulic fluids within the category HFD, as classified in ISO 6743-4.
It provides a qualitative assessment of corrosion of five of the most common metals used in the construction of hydraulic systems, but other metals and/or alloys could be added or substituted for these metals for particular installations.

Mineralölerzeugnisse und verwandte Produkte - Bestimmung der Korrosionshemmenden Eigenschaften von schwer entflammbaren Druckflüssigkeiten - Teil 2: Nicht-wässrige Flüssigkeiten (ISO 4404-2:2003)

Dieser Teil der ISO 4404 legt ein Verfahren fest zur Bestimmung der korrosionshemmenden Eigenschaften
von nicht-wässrigen Hydraulikflüssigkeiten der Klasse HFD, die in ISO 6743-4 klassifiziert sind.
Das Prüfverfahren ermöglicht die qualitative Beurteilung der Korrosion für die fünf am häufigsten in der
Konstruktion von Hydraulikanlagen eingesetzten Metalle. Für spezielle Anlagenkonstruktionen können jedoch
auch andere Metalle und/oder Legierungen ergänzt oder substituiert werden.
ANMERKUNG Die Bestimmung der Korrosionsschutzeigenschaften von wässrigen Hydraulikflüssigkeiten der Klassen
HFA, HFB und HFC werden in der ISO 4404-1 beschrieben.

Pétrole et produits connexes - Détermination de la résistance à la corrosion de fluides hydrauliques difficilement inflammables - Partie 2: Fluides non aqueux (ISO 4404-2:2003)

L'ISO 4404-2:2003 spécifie une méthode d'essai qui a pour but de déterminer les propriétés anticorrosives des fluides hydrauliques non aqueux de catégorie HFD classés dans l'ISO 6743-4.
Elle permet d'obtenir une évaluation qualitative de la corrosion provoquée par un fluide sur cinq des métaux les plus usuels employés dans la fabrication des circuits hydrauliques, mais d'autres métaux et/ou alliages peuvent être ajoutés ou substitués à ces cinq métaux dans le cadre d'installations spéciales.

Nafta in naftni proizvodi – Določanje korozijske odpornosti negorljivih hidravličnih tekočin – 2. del: Nevodne tekočine (ISO 4404-2:2003)

General Information

Status
Withdrawn
Publication Date
31-Jul-2003
Withdrawal Date
14-Dec-2010
Current Stage
9960 - Withdrawal effective - Withdrawal
Due Date
15-Dec-2010
Completion Date
15-Dec-2010

RELATIONS

Buy Standard

Standard
EN ISO 4404-2:2003
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 4404-2:2003
01-november-2003

1DIWDLQQDIWQLSURL]YRGL±'RORþDQMHNRUR]LMVNHRGSRUQRVWLQHJRUOMLYLKKLGUDYOLþQLK

WHNRþLQ±GHO1HYRGQHWHNRþLQH ,62

Petroleum and related products - Determination of the corrosion resistance of fire-

resistant hydraulic fluids - Part 2: Non-aqueous fluids (ISO 4404-2:2003)
Mineralölerzeugnisse und verwandte Produkte - Bestimmung der Korrosionshemmenden

Eigenschaften von schwer entflammbaren Druckflüssigkeiten - Teil 2: Nicht-wässrige

Flüssigkeiten (ISO 4404-2:2003)

Pétrole et produits connexes - Détermination de la résistance a la corrosion de fluides

hydrauliques difficilement inflammables - Partie 2: Fluides non aqueux (ISO 4404-

2:2003)
Ta slovenski standard je istoveten z: EN ISO 4404-2:2003
ICS:
75.120 +LGUDYOLþQLIOXLGL Hydraulic fluids
SIST EN ISO 4404-2:2003 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 4404-2:2003
---------------------- Page: 2 ----------------------
SIST EN ISO 4404-2:2003
EUROPEAN STANDARD
EN ISO 4404-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2003
ICS 75.120
English version
Petroleum and related products - Determination of the corrosion
resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous
fluids (ISO 4404-2:2003)

Pétrole et produits connexes - Détermination de la Mineralölerzeugnisse und verwandte Produkte -

résistance à la corrosion de fluides hydrauliques Bestimmung der korrosionsverhindernden Eigenschaften

difficilement inflammables - Partie 2: Fluides non aqueux von schwer entflammbaren Druckflüssigkeiten - Teil 2:

(ISO 4404-2:2003) Nicht-wässrige Flüssigkeiten (ISO 4404-2:2003)
This European Standard was approved by CEN on 27 June 2003.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official

versions.

CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,

Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United

Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels

© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4404-2:2003 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 4404-2:2003
EN ISO 4404-2:2003 (E)
CORRECTED 2003-09-17
Foreword

This document (EN ISO 4404-2:2003) has been prepared by Technical Committee ISO/TC 28

"Petroleum products and lubricants" in collaboration with Technical Committee CEN/TC 19 "Petroleum

products, lubricants and related products", the secretariat of which is held by NEN.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by February 2004, and conflicting national standards

shall be withdrawn at the latest by February 2004.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Czech

Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg,

Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and the United Kingdom.

Endorsement notice

The text of ISO 4404-2:2003 has been approved by CEN as EN ISO 4404-2:2003 without any

modifications.

NOTE Normative references to International Standards are listed in annex ZA (normative).

---------------------- Page: 4 ----------------------
SIST EN ISO 4404-2:2003
EN ISO 10993-1:2003 (E)
Annex ZA
(normative)
Normative references to international publications with their relevant European
publications

This European Standard incorporates by dated or undated reference, provisions from other publications.

These normative references are cited at the appropriate places in the text and the publications are listed

hereafter. For dated references, subsequent amendments to or revisions of any of these publications

apply to this European Standard only when incorporated in it by amendment or revision. For undated

references the latest edition of the publication referred to applies (including amendments).

NOTE Where an International Publication has been modified by common modifications, indicated by (mod.), the

relevant EN/HD applies.
Publication Year Title EN Year
ISO 3170 1988 Petroleum liquids - Manual sampling EN ISO 3170 1998

ISO 6743-4 1999 Lubricants, industrial oils and related products EN ISO 6743-4 2001

(class L) - Classification - Part 4: Family H
(Hydraulic systems)
---------------------- Page: 5 ----------------------
SIST EN ISO 4404-2:2003
---------------------- Page: 6 ----------------------
SIST EN ISO 4404-2:2003
INTERNATIONAL ISO
STANDARD 4404-2
First edition
2003-08-01
Petroleum and related products —
Determination of the corrosion resistance
of fire-resistant hydraulic fluids —
Part 2:
Non-aqueous fluids
Pétrole et produits connexes — Détermination de la résistance à la
corrosion de fluides hydrauliques difficilement inflammables —
Partie 2: Fluides non aqueux
Reference number
ISO 4404-2:2003(E)
ISO 2003
---------------------- Page: 7 ----------------------
SIST EN ISO 4404-2:2003
ISO 4404-2:2003(E)
PDF disclaimer

This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but

shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In

downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat

accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.

Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation

parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In

the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

© ISO 2003

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,

electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or

ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2003 — All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 4404-2:2003
ISO 4404-2:2003(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies

(ISO member bodies). The work of preparing International Standards is normally carried out through ISO

technical committees. Each member body interested in a subject for which a technical committee has been

established has the right to be represented on that committee. International organizations, governmental and

non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the

International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.

The main task of technical committees is to prepare International Standards. Draft International Standards

adopted by the technical committees are circulated to the member bodies for voting. Publication as an

International Standard requires approval by at least 75 % of the member bodies casting a vote.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. ISO shall not be held responsible for identifying any or all such patent rights.

ISO 4404-2 was prepared by Technical Committee ISO/TC 28, Petroleum products and lubricants.

ISO 4404 consists of the following parts, under the general title Petroleum and related products —

Determination of the corrosion resistance of fire-resistant hydraulic fluids:
 Part 1: Water-containing fluids
 Part 2: Non-aqueous fluids
© ISO 2003 — All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 4404-2:2003
---------------------- Page: 10 ----------------------
SIST EN ISO 4404-2:2003
INTERNATIONAL STANDARD ISO 4404-2:2003(E)
Petroleum and related products — Determination of the
corrosion resistance of fire-resistant hydraulic fluids —
Part 2:
Non-aqueous fluids

WARNING — The use of this International Standard may involve hazardous materials, operations and

equipment. This International Standard does not purport to address all of the safety problems

associated with its use. It is the responsibility of the user of this International Standard to establish

appropriate safety and health practices and determine the applicability of regulatory limitations prior

to use.
1 Scope

This part of ISO 4404 specifies a procedure for the determination of the corrosion-inhibiting properties of non-

aqueous hydraulic fluids within the catego
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.