iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO/IEC 7811-5:1996

(Main)

Identification cards - Recording technique - Part 5: Location of read-write magnetic track - Tracks 3 (ISO/IEC 7811-5:1995)

Identification cards - Recording technique - Part 5: Location of read-write magnetic track - Tracks 3 (ISO/IEC 7811-5:1995)

This technical report is applicable to the Raman gain efficiency measurement of a single-mode transmission optical fibre. It is useful in assessing the fibre's performance in Raman amplified transmission systems. This technical report describes a method that uses two unmodulated continuous waves to measure the Raman gain efficiency of a single-mode transmission optical fibre. This parameter assesses the fibre's efficiency at converting input pump power to information signal power. This second  edition differs from the first in that in the previous edition, in the paragraph before Figure 2, there was an approximation of the relationship between wavelength and optical frequency that led to some inconsistencies in interlaboratory agreement. This approximation has been removed.

Identifikationskarten - Aufzeichnungstechnik - Teil 5: Lage von Schreib-Lese - Spur 3 (ISO/IEC 7811-5:1995)

Cartes d'identification - Technique d'enregistrement - Partie 5: Position de la piste magnétique d'enregistrement-lecture - Piste 3 (ISO/IEC 7811-5:1995)

Identification cards - Recording technique - Part 5: Location of read-write magnetic track - Tracks 3 (ISO/IEC 7811-5:1995)

General Information

Status
Withdrawn
Publication Date
23-Jul-1996
Withdrawal Date
21-Mar-2004
ICS
35.240.15 - Identification cards. Chip cards. Biometrics
Technical Committee
CEN/TC 224 - Machine-readable cards, related device interfaces and operations
Drafting Committee
CEN/TC 224 - Machine-readable cards, related device interfaces and operations
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
22-Mar-2004
Completion Date
22-Mar-2004
Ref Project
SIST EN ISO/IEC 7811-5:1998 - Identification cards - Recording technique - Part 5: Location of read-write magnetic track - Tracks 3 (ISO/IEC 7811-5:1995)

Buy Standard

EN ISO/IEC 7811-5:1998EN ISO/IEC 7811-5:1998
PreviousNext
Standard
EN ISO/IEC 7811-5:1998
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO/IEC 7811-5:1998
01-junij-1998
Identification cards - Recording technique - Part 5: Location of read-write magnetic
track - Tracks 3 (ISO/IEC 7811-5:1995)
Identification cards - Recording technique - Part 5: Location of read-write magnetic track
- Tracks 3 (ISO/IEC 7811-5:1995)
Identifikationskarten - Aufzeichnungstechnik - Teil 5: Lage von Schreib-Lese - Spur 3
(ISO/IEC 7811-5:1995)
Cartes d'identification - Technique d'enregistrement - Partie 5: Position de la piste
magnétique d'enregistrement-lecture - Piste 3 (ISO/IEC 7811-5:1995)
Ta slovenski standard je istoveten z: EN ISO/IEC 7811-5:1996
ICS:
35.240.15 Identifikacijske kartice in Identification cards and
sorodne naprave related devices
SIST EN ISO/IEC 7811-5:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO/IEC 7811-5:1998

---------------------- Page: 2 ----------------------

SIST EN ISO/IEC 7811-5:1998

---------------------- Page: 3 ----------------------

SIST EN ISO/IEC 7811-5:1998

---------------------- Page: 4 ----------------------

SIST EN ISO/IEC 7811-5:1998

---------------------- Page: 5 ----------------------

SIST EN ISO/IEC 7811-5:1998

---------------------- Page: 6 ----------------------

SIST EN ISO/IEC 7811-5:1998
INTERNATIONAL
ISO/IEC
STANDARD
781 l-5
Second edition
1995-08-I 5
Identification cards - Recording technique -
Part 5:
Location of read-write magnetic track -
Track 3
Cartes d’iden tifica tion - Technique d’enregistrement -
Partie 5: Position de la piste magnktique
d’enregistrement-lecture - Piste 3
Reference number
lSO/IEC 781 l-5:1 995(E)

---------------------- Page: 7 ----------------------

SIST EN ISO/IEC 7811-5:1998
ISO/IEC 7811=5:1995(E)
Foreword
IS0 (the International Organization for Standardization) and IEC (the
International Electrotechnical Commission) form the specialized system for
worldwide standardization. National bodies that are members of IS0 or
IEC participate in the development of International Standards through
technical committees established by the respective organization to deal
with particular fields of technical activity. IS0 and IEC technical com-
mittees collaborate in fields of mutual interest. Other international organ-
izations, governmental and non-governmental, in liaison with IS0 and IEC,
also take part in the work.
In the field of information technology, IS0 and IEC have established a joint
technical committee, lSO/IEC JTC 1. Draft international Standards adopted
by the joint technical committee are circulated to the member bodies for
voting. Publication as an International Standard requires approval by at
least 75 % of the national bodies casting a vote.
International Standard lSO/IEC 781 l-5 was prepared by Joint Technica
Committee lSO/lEC JTC 1, Information fechnology, Subcommittee SC 17
/den tifica tion cards and related devices.
This second edition cancels and replaces the first editior
(IS0 781 l-5:1 985), of which it constitutes a technical revision.
lSO/IEC 7811 consists of the following parts, under the general title
/den tifica tion cards - Recording technique:
- Part I: Embossing
- Part 2: Magnetic stripe
- Part 3: Location of embossed characters on ID-7 cards
- Part 4: Location of read-only magnetic tracks - Tracks 7 and 2
- Part 5: Location of read-write magnetic tracks - Track 2
0 lSO/IEC 1995
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including protocopying and
microfilm, without permission in writing from the publisher.
lSO/lEC Copyright Office l Case postale 56 l CH-1211 Geneve 20 0 Switzerland
Printed in Switzerland
ii

---------------------- Page: 8 ----------------------

SIST EN ISO/IEC 7811-5:1998
@ lSO/IEC ISO/IEC 7811=5:1995(E)
Introduction
lSO/IEC 7811 is one of a series of standards describing the parameters for
identification cards as defined in clause 3 and the use of such cards for
international interchange.
The recording technique and the coded character sets for track 3, intended
for alphanumeric data, are specified in lSO/IEC 781 l-2.
. . .
III

---------------------- Page: 9 ----------------------

SIST EN ISO/IEC 7811-5:1998
This page int
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
CEN/TS 17661:2021(Main)
Personal identification – European enrolment guide for biometric ID documents (EEG)
SIST-TS CEN/TS 17661:2022

This document consolidates information relating to successful and high quality biometric enrolment processes of facial and fingerprint systems, while indicating risk factors and providing appropriate mitigations. This information supports decisions regarding procurement, design, deployment and operation of these biometric systems.
This document provides guidance on:
—   capturing of facial images to be used as reference images in identity and secure documents;
—   capturing of fingerprint images to be used as reference images in identity and secure documents;
—   data quality maintenance for biometric reference data;
—   data authenticity maintenance for biometric reference data.
The document addresses the following aspects which are specific for biometric reference data capturing:
—   biometric data quality and interoperability ensurance;
—   data authenticity ensurance;
—   morphing and other presentation attack detection as well as other unauthorized changes;
—   accessibility and usability;
—   privacy and data protection;
—   optimal enrolment design.
The following aspects are out of scope:
—   IT security;
—   data capturing for verification purposes, e.g. in ABC gates;
—   capturing biometric data for enrolment in other systems different from data enrolment for integration in secure MRTD, like entry/exit systems.
This document consolidates the role of the enrolment process in a biometric system and differentiates the enrolment from the authentication, while mentioning key factors of the enrolment process that are feature independent.
Interests of the existing stakeholders are broken down and provide an insight on different views of the enrolment. In addition, organisational enrolment approaches are covered.
This document is not concerned with IT requirements or the capturing of biometric data for inspection, identification or verification purposes without the required step of creating an identity document using the captured data.

  • Technical specification
    73 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17631:2021(Main)
Personal identification - Biometric group access control
SIST-TS CEN/TS 17631:2021

This document provides guidance on providing access:
— to areas with physical access control, e.g. entertainment facilities, train stations, shops, libraries, banks, or border control,
— for small groups of persons, e.g. families with small children or seniors, or other accompanied persons in need of support,
— by means of biometric authentication technologies, e.g. facial, fingerprint, or vein recognition,
— in the European regulatory context.
The document addresses the following aspects, which are specific for biometric and group access:
— accessibility and usability,
— user guidance including group guidance and interaction control,
— privacy including data set content,
— presentation attack detection,
— applicable biometric technologies,
— storage of reference data,
— biometric process integration,
— specific needs considering biometrics for groups,
— biometric performance and error rates, and
— group internal linkage.
The following aspects which reflect on generic access control issues are out of scope:
— IT security,
— application specific physical security,
— policy definition,
— processes not related to biometric authentication, and
— specific performance requirements of identification (1:N) and verification (1:1) applications.

  • Technical specification
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1332-3:2020(Main)
Identification card systems - User Interface - Part 3: Key pads
SIST EN 1332-3:2020

This document covers the ergonomic layout and usability of keypads. The keypad consists of numeric, command and function keys and alphanumeric characters. On the basis that keypad layout impacts performance (keying speed, and errors), this document aims to:
-   enhance usability,
-   ensure ease of use through consistency,
-   increase customer confidence,
-   reduce customer error,
-   improve operating time,
-   ensure ergonomic data entry.
This document specifies the arrangement, the number and location of numeric, function and command keys, including placement of alphabetic characters on numeric keys. Design requirements and recommendations are also provided.
This document applies to all identification card systems with a numeric keypad for use by the public for stationary or non-stationary devices. This document also covers keypads on touch sensitive devices.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17489-1:2020(Main)
Personal identification - Secure and interoperable European Breeder Documents - Part 1: Framework overview
SIST-TS CEN/TS 17489-1:2020

This document provides an overview of a framework on breeder documents. It introduces the document structure of CEN/TS 17489 (all parts) that specifies how citizens retain the control of breeder document data and how they can use them to support identity proofing and verification. Moreover, the framework provides methodologies to assess and increase the level of trust in breeder documents.
This framework specifies methods for:
-   defining physical and logical/digital representations of a secure breeder document (hardware based, paper-based, server-based),
-   securing breeder document processes,
-   linking the document to its legitimate holder.
The following types of breeder documents are in the scope of the framework:
-   birth certificates,
-   marriage and partnership certificates,
-   death certificates.
The following breeder documents management processes including first-time application, later-in-life registration of an identity, and content update (e.g. name-changing) are in the scope of this framework:
-   registration,
-   issuance,
-   renewal,
-   inspection/verification,
-   revocation.
The specification of policies is out of scope.

  • Technical specification
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17054:2019(Main)
Biometrics multilingual vocabulary based upon the English version of ISO/IEC 2382-37:2012
SIST EN 17054:2019

This document establishes a systematic description of the concepts in the field of biometrics pertaining to recognition of human beings and reconciles variant terms in use in pre-existing biometric standards against the preferred terms, thereby clarifying the use of terms in this field.
Excluded from the scope of this document are concepts (represented by terms) from information technology, pattern recognition, biology, mathematics, etc. Biometrics uses such fields of knowledge as a basis.
In principle, mode specific terms are outside the scope of this document.
Words in bold are defined in this document. Words that are not in bold are to be understood in their natural language sense. The authority for natural language use of terms in this document is the Concise Oxford English Dictionary (COD), Thumb Index Edition (tenth edition, revised, 2002). Words used in their natural language sense are considered out-of-scope for further definition in this document.

  • Standard
    76 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    77 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17261:2018(Main)
Biometric authentication for critical infrastructure access control - Requirements and Evaluation
SIST-TS CEN/TS 17261:2019

This document addresses biometric recognition systems that are used as part of an automated access control system to provide a second and independent authentication factor of the individual using the AACS to access secured areas of critical infrastructure.
This document:
-   specifies requirements for biometric recognition systems to be used as part of an AACS for critical infrastructure,
-   describes a methodology for the evaluation of biometric authentication for AACSs against the specified requirements.
The requirements and test methods address biometric authentication for AACS that: (i) operate in an internal environment constituting part of a larger site, access to which is restricted and controlled by a separate access control system; and (ii) use biometrics as a second authentication factor to a token or proximity card.
This document does not consider access by the general public, e.g. passengers in an airport, or visitors to a hospital.
Products that meet the requirements of this document will comprise (i) a biometric sensor(s) external to the secured area, which reads the biometric characteristics of the user at the point of access; and (ii) a biometric server system performing biometric enrolment, signal processing, storage of biometric references and biometric comparison within a secured area.
This document does not address AACS or AACS portals (turnstiles) but is only concerned with the biometric components which integrate with the AACS. Other standards address requirements and testing of the non-biometric parts of the AACS.

  • Technical specification
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 419212-5:2018(Main)
Application Interface for Secure Elements for Electronic Identification, Authentication and Trusted Services - Part 5: Trusted eService
SIST EN 419212-5:2018

This part of this series contains Identification, Authentication and Digital Signature (IAS) services in addition to the QSCD mechanisms already described in Part 1 to enable interoperability and usage for IAS services on a national or European level.
It also specifies additional mechanisms like key decipherment, Client Server authentication, identity management and privacy related services.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 419212-4:2018(Main)
Application Interface for Secure Elements for Electronic Identification, Authentication and Trusted Services - Part 4: Privacy specific Protocols
SIST EN 419212-4:2018

This part specifies mechanisms for SEs to be used as privacy-enabled devices in the context of IAS, and fulfil the requirements of Article 5 of the so-called eIDAS Regulation about data processing and protection.
It covers:
- Age verification
- Document validation
- Restricted identification
- eServices with trusted third party based on ERA protocol

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 419212-1:2017(Main)
Application Interface for Secure Elements for Electronic Identification, Authentication and Trusted Services - Part 1: Introduction and common definitions
SIST EN 419212-1:2018

This part is an informative introduction into the following parts. It gives guidance to the following parts in order to allow an efficient usage of the provided information. Therefore Part 1 provides history, application context, market perspective and a tutorial about the basic understanding of electronic signatures.
-   Clause 3 provides "Terms and definitions" covering all parts of this standards. The specific parts will contain a similar section which refers to the clause of this Part 1.
-   Clause 4 provides "Symbols and abbreviations" covering all parts of this standards. The specific parts will contain a similar section which refers to the clause of this Part 1.
-   Clause 5 provides a Management Summary that describes the market context in which electronic signatures are typically
-   Annex A provides the algorithm identifies for all parts of the standard.
-   Annex B provides the algorithm identifies for all parts of the standard.
-   Annex C provides the build scheme for object identifiers for all parts of the standard.
-   Annex D "Tutorial on Signature Technology" provides a tutorial which helps the first reader to get familiar with signature technology and its relation to the society that it serves.
-   Annex E "Guide to the EN 419212" explains the historical and technical evolution of the ESIGN activities which did finally lead to this version of the signature standard.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 419212-2:2017(Main)
Application Interface for Secure Elements for Electronic Identification, Authentication and Trusted Services - Part 2: Signature and Seal Services
SIST EN 419212-2:2018

This part specifies mechanisms for SEs to be used as qualified signature creation devices covering:
•   Signature creation and mobile signature creation
•   User verification
•   Password based authentication
The specified mechanisms are suitable for other purposes like services in the context of EU Regulation 910/2014 of the European Parliament and the Council of 23 July 2014 on electronic identification and trust services for electronic transactions in the internal market and repealing Directive 1999/93/EC.
The particular case of seal is also covered by the specification. The differences between seal and signature are exposed in Annex B. Annex B also explains how the mechanisms for SEs as qualified signature creation devices can be used for SEs as qualified seal creation devices.
Mobile signature is an alternative to the classical signature case which is performed by a secure element. Mobile signature is encouraged by the large widespread of mobile devices and the qualification authorized by the eIDAS Regulation. The particular case of remote signature (or server signing) is covered by this specification in Annex C.
In the rest of this document, except Annex B, there will be no particular notion of a seal since it technically compares to the signature.

  • Standard
    115 pages
    English language
    sale 10% off
    e-Library read for
    1 day