EN 13445-10:2015
(Main)Unfired pressure vessels - Part 10: Additional requirements for pressure vessels of nickel and nickel alloys
Unfired pressure vessels - Part 10: Additional requirements for pressure vessels of nickel and nickel alloys
This Part 10 of this European Standard specifies requirements for unfired pressure vessels and their parts made of nickel and nickel alloys (see 3.1) in addition to the general requirements for unfired pressure vessels under EN 13445-1:2014, EN 13445-2:2014, EN 13445-3:2014, EN 13445-4:2014 and EN 13445-5:2014.
NOTE Cast materials are not included in this version. Details regarding cast materials will be subject to an amendment to or a revision of this European Standard.
Unbefeuerte Druckbehälter - Teil 10: Zusätzliche Anforderungen an Druckbehälter aus Nickel und Nickellegierungen
Dieser Teil 10 der Europäischen Norm legt zusätzlich zu den allgemeinen Anforderungen an unbefeuerte Druckbehälter nach EN 13445 1:2014, EN 13445-2:2014, EN 13445-3:2014, EN 13445-4:2014 und EN 13445-5:2014 Anforderungen an aus Nickel und Nickellegierungen (siehe 3.1) hergestellte unbefeuerte Druckbehälter und deren Bauteile fest.
ANMERKUNG Gusswerkstoffe sind in der vorliegenden Fassung nicht enthalten. Angaben zu Gusswerkstoffen werden in einer Änderung dieser Europäischen Norm erfasst.
Récipients sous pression non soumis à la flamme - Partie 10 : Exigences complémentaires pour les récipients sous pression en nickel et alliages de nickel
La Partie 10 de la présente Norme européenne définit les exigences relatives aux récipients sous pression non soumis à la flamme en nickel et alliages de nickel et à leurs parties (voir 3.1), en complément des exigences générales relatives aux récipients sous pression non soumis à la flamme des EN 13445-1:2014, EN 13445-2:2014, EN 13445-3:2014, EN 13445-4:2014 et EN 13445-5:2014.
NOTE La présente version ne traite pas des matériaux moulés. Les détails relatifs aux matériaux moulés feront l'objet d'un amendement ou d'une révision de la présente Norme européenne.
Neogrevane tlačne posode - 10. del: Dodatne zahteve za tlačne posode iz niklja in nikljevih zlitin
Ta 10. del evropskega standarda določa zahteve za neogrevane tlačne posode in njihove dele, izdelane iz niklja in nikljevih zlitin (glejte 5.2), poleg splošnih zahtev za neogrevane tlačne posode iz 1. do 5. dela standarda EN 13445:2009.
OPOMBA: Zlitine za litje niso vključene v to različico. Podrobnosti glede zlitin za litje bodo predmet dodatka k temu evropskemu standardu ali njegove revizije.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 13445-10:2016
01-marec-2016
1HRJUHYDQHWODþQHSRVRGHGHO 'RGDWQH]DKWHYH]DWODþQHSRVRGHL]QLNOMDLQ
QLNOMHYLK]OLWLQ
Unfired pressure vessels - Part 10: Additional requirements for pressure vessels of nickel
and nickel alloys
Unbefeuerte Druckbehälter - Teil 10: Zusätzliche Anforderungen an Druckbehälter aus
Nickel und Nickellegierungen
Récipients sous pression non soumis à la flamme - Partie 10 : Exigences
complémentaires pour les récipients sous pression en nickel et alliages de nickel
Ta slovenski standard je istoveten z: EN 13445-10:2015
ICS:
23.020.32 7ODþQHSRVRGH Pressure vessels
77.150.40 Nikljevi in kromovi izdelki Nickel and chromium
products
SIST EN 13445-10:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 13445-10:2016
---------------------- Page: 2 ----------------------
SIST EN 13445-10:2016
EN 13445-10
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2015
EUROPÄISCHE NORM
ICS 23.020.30
English Version
Unfired pressure vessels - Part 10: Additional
requirements for pressure vessels of nickel and nickel
alloys
Récipients sous pression non soumis à la flamme - Unbefeuerte Druckbehälter - Teil 10: Zusätzliche
Partie 10 : Exigences complémentaires pour les Anforderungen an Druckbehälter aus Nickel und
récipients sous pression en nickel et alliages de nickel Nickellegierungen
This European Standard was approved by CEN on 10 October 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13445-10:2015 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 13445-10:2016
EN 13445-10:2015 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms, definitions, symbols and units . 5
4 General requirements . 5
5 Materials . 6
5.1 General . 6
5.2 Material grouping system . 6
5.3 Material documentation . 6
5.4 Prevention of brittle fracture . 6
5.5 Lamellar tearing . 6
6 Design .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.