EN ISO 9606-4:1999
(Main)Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999)
Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999)
This standard specifies essential requirements, ranges of approval, test conditions, acceptance requirements and
certification for the approval testing of welder performance for the welding of nickel.
This standard applies to the approval testing of welders for the fusion welding of nickel.
This standard is intended to provide the basis for the mutual recognition by examining bodies for approval relating to
welders' competence in the various fields of application. Tests will be carried out in accordance with this standard unless
more severe tests are specified by the relevant application standard when these are applied.
During the approval test the welder should be required to show adequate practical experience and job knowledge (test
non mandatory) of the welding processes, materials and safety requirements for which he is to be approved; information
on these aspects is given in Annex A.
This standard is applicable when the welder's approval testing is required by the purchaser, by inspection authorities or
by other organizations.
The welding processes referred to in this standard include those fusion welding processes which are designated as
manual or partly mechanized welding. It does not cover fully mechanized and automatic processes (see 5.2).
This standard covers approval testing of welders for work on semi-finished and finished products made from wrought,
forged or cast material types listed in 5.4.
The certificate of approval testing is issued under the sole responsibility of the examiner or examining body.
Prüfung von Schweißern - Schmelzschweißen - Teil 4: Nickel und Nickellegierungen (ISO 9606-4:1999)
In dieser Norm werden die wesentlichen Anforderungen, Geltungsbereiche, Prüfbedingungen und Bewertungsanforderungen sowie die Prüfungsbescheinigung über die durchgeführte Prüfung des Schweißers für Nickelschweißungen festgelegt. Diese Norm gilt für die Prüfung von Schweißern für das Schmelzschweißen von Nickel. Mit dieser Norm ist beabsichtigt, die Grundlage für die gegenseitige Anerkennung von Prüfungen über das Können der Schweißer in den verschiedenen Anwendungsgebieten durch die zuständigen Stellen zu schaffen.
Epreuve de qualification des soudeurs - Soudage par fusion - Partie 4: Nickel et ses alliages (ISO 9606-4:1999)
La présente norme européenne spécifie les prescriptions essentielles à respecter, les domaines de
validité, les conditions de contrôle, d'examen et d'essai, les critères d'acceptation et de notification des
résultats de l'épreuve de qualification de soudeurs sur nickel et ses alliages.
La présente norme européenne s'applique à la qualification des soudeurs pour le soudage par fusion du
nickel et de ses alliages.
La présente norme européenne a pour but de fournir les bases d'un système de reconnaissance
mutuelle de la qualification des soudeurs délivrée par les examinateurs dans les divers domaines
d'application. Les épreuves se dérouleront conformément à la présente norme européenne, sauf si des
conditions plus sévères sont éventuellement exigées par la norme d'application.
Pendant l'épreuve de qualification, il est recommandé de demander au soudeur de faire preuve de son
expérience pratique et de sa compétence technologique (examen non obligatoire) portant sur les
méthodes de soudage, les matériaux et les règles de sécurité applicables à la qualification en cours.
L'annexe A donne des informations sur la partie "Compétence technologique" de l'épreuve.
La présente norme européenne est applicable dans le cas où la qualification du soudeur est requise par
le client, par l'organisme d'inspection ou par une quelconque instance.
Les procédés de soudage concernés par la présente norme européenne sont les procédés de soudage
par fusion manuels ou semi-automatiques à l'exclusion des procédés de soudage totalement mécanisés
ou totalement automatisés (voir 5.2).
La présente norme européenne concerne la qualification des soudeurs travaillant sur des produits finis
ou semi-finis, en matériaux corroyés, forgés ou moulés des types indiqués en 5.4.
La délivrance du certificat de qualification relève de la seule responsabilité de l'examinateur ou de
l'organisme d'examen.
Preskušanje varilcev - Talilno varjenje - 4. del: Nikelj in nikljeve zlitine (ISO 9606-4:1999)
General Information
- Status
- Published
- Publication Date
- 31-Mar-1999
- Technical Committee
- CEN/TC 121 - Welding
- Drafting Committee
- CEN/TC 121/SC 4 - Quality management in the field of welding
- Current Stage
- 9093 - Decision to confirm - Review Enquiry
- Start Date
- 21-Apr-2005
- Completion Date
- 21-Apr-2005
Relations
- Effective Date
- 29-May-2024
Overview
EN ISO 9606-4:1999 - Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999) is a CEN-adopted international standard that defines the scope and requirements for qualifying welders to perform fusion welding of nickel and nickel alloys. The standard sets out essential requirements, test conditions, acceptance criteria and certification procedures intended to enable mutual recognition of welder approvals among examining bodies.
Key topics and requirements
- Scope of approval: Applies to manual and partly mechanized fusion welding processes for nickel and nickel alloys; excludes fully mechanized and automatic processes (see clause 5.2).
- Test content: Specifies ranges of approval, test conditions and acceptance requirements for welder performance tests (general framework only - see standard for details).
- Certification: Certificate of approval is issued under the sole responsibility of the examiner or examining body.
- Mutual recognition: Designed to provide a common basis for mutual recognition of welder competence among examining authorities and purchasers.
- Practical experience and job knowledge: During approval testing the welder may be required to demonstrate practical experience and job knowledge of welding processes, materials and safety requirements; guidance on this is provided in Annex A (the knowledge test is non-mandatory).
- Materials covered: Applies to semi-finished and finished products made from wrought, forged or cast nickel and nickel alloy types listed in clause 5.4 of the standard.
Applications - who uses this standard
- Welding employers and contractors qualifying welders for nickel welding work.
- Certification and examining bodies performing welder approval testing.
- Inspection authorities and purchasers requiring documented welder competence for nickel fabrication.
- Training organizations, welding supervisors and quality managers establishing welder qualification programs.
- Industrial sectors that require reliable nickel welding (e.g., chemical processing, marine, power generation, and specialty alloy fabrication).
Practical value
- Provides a harmonized, recognizable framework for welder qualification specifically for nickel materials.
- Helps ensure consistent test methodology, acceptance criteria and documentation across organizations and borders.
- Facilitates procurement and inspection decisions by offering standardized evidence of welder competence.
Related standards
- Other parts of ISO 9606 cover approval testing of welders for different materials and processes; consult the ISO 9606 series and relevant application standards for more stringent or specific testing requirements.
Keywords: EN ISO 9606-4, ISO 9606-4:1999, approval testing of welders, nickel welding, nickel alloys, fusion welding, welder qualification, CEN.
Frequently Asked Questions
EN ISO 9606-4:1999 is a standard published by the European Committee for Standardization (CEN). Its full title is "Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999)". This standard covers: This standard specifies essential requirements, ranges of approval, test conditions, acceptance requirements and certification for the approval testing of welder performance for the welding of nickel. This standard applies to the approval testing of welders for the fusion welding of nickel. This standard is intended to provide the basis for the mutual recognition by examining bodies for approval relating to welders' competence in the various fields of application. Tests will be carried out in accordance with this standard unless more severe tests are specified by the relevant application standard when these are applied. During the approval test the welder should be required to show adequate practical experience and job knowledge (test non mandatory) of the welding processes, materials and safety requirements for which he is to be approved; information on these aspects is given in Annex A. This standard is applicable when the welder's approval testing is required by the purchaser, by inspection authorities or by other organizations. The welding processes referred to in this standard include those fusion welding processes which are designated as manual or partly mechanized welding. It does not cover fully mechanized and automatic processes (see 5.2). This standard covers approval testing of welders for work on semi-finished and finished products made from wrought, forged or cast material types listed in 5.4. The certificate of approval testing is issued under the sole responsibility of the examiner or examining body.
This standard specifies essential requirements, ranges of approval, test conditions, acceptance requirements and certification for the approval testing of welder performance for the welding of nickel. This standard applies to the approval testing of welders for the fusion welding of nickel. This standard is intended to provide the basis for the mutual recognition by examining bodies for approval relating to welders' competence in the various fields of application. Tests will be carried out in accordance with this standard unless more severe tests are specified by the relevant application standard when these are applied. During the approval test the welder should be required to show adequate practical experience and job knowledge (test non mandatory) of the welding processes, materials and safety requirements for which he is to be approved; information on these aspects is given in Annex A. This standard is applicable when the welder's approval testing is required by the purchaser, by inspection authorities or by other organizations. The welding processes referred to in this standard include those fusion welding processes which are designated as manual or partly mechanized welding. It does not cover fully mechanized and automatic processes (see 5.2). This standard covers approval testing of welders for work on semi-finished and finished products made from wrought, forged or cast material types listed in 5.4. The certificate of approval testing is issued under the sole responsibility of the examiner or examining body.
EN ISO 9606-4:1999 is classified under the following ICS (International Classification for Standards) categories: 25.160.10 - Welding processes. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 9606-4:1999 has the following relationships with other standards: It is inter standard links to prEN ISO 9606. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 9606-4:1999 is associated with the following European legislation: EU Directives/Regulations: 2014/68/EU, 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN ISO 9606-4:1999 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-1999
Preskušanje varilcev - Talilno varjenje - 4. del: Nikelj in nikljeve zlitine (ISO 9606-
4:1999)
Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-
4:1999)
Prüfung von Schweißern - Schmelzschweißen - Teil 4: Nickel und Nickellegierungen
(ISO 9606-4:1999)
Epreuve de qualification des soudeurs - Soudage par fusion - Partie 4: Nickel et ses
alliages (ISO 9606-4:1999)
Ta slovenski standard je istoveten z: EN ISO 9606-4:1999
ICS:
03.100.30 Vodenje ljudi Management of human
resources
25.160.10 Varilni postopki in varjenje Welding processes
77.120.40 Nikelj, krom in njune zlitine Nickel, chromium and their
alloys
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...
기사 제목: EN ISO 9606-4:1999 - 용접 작업자 승인 시험 - 용융 용접 - 파트 4: 니켈 및 니켈 합금 (ISO 9606-4:1999) 기사 내용: 이 표준은 니켈 용접의 용접 작업자 성능 승인 시험에 대한 필수 요구 사항, 승인 범위, 시험 조건, 승인 요구 사항 및 인증을 명시합니다. 이 표준은 니켈의 용융 용접을 위한 용접 작업자의 승인 시험에 적용됩니다. 이 표준은 각 응용 분야에서 검사 기관들 간의 상호 인정을 위한 용접 작업자의 역량을 명시적으로 제공하기 위해 만들어졌습니다. 이 표준에서는 관련 응용 표준에서 추가로 엄격한 시험이 지정되지 않는 한 이 표준에 따라 시험을 실시합니다. 승인 시험 중에는 승인될 용접 작업자가 해당되는 용접 공정, 재료 및 안전 요구 사항에 대한 충분한 실무 경험과 작업 지식을 보여주어야 합니다 (시험은 필수 사항이 아님). 이러한 측면에 대한 정보는 부록 A에 제공됩니다. 이 표준은 구매자, 검사 기관 또는 기타 기관에서 용접 작업자의 승인 시험이 필요할 경우 적용됩니다. 이 표준에서 언급한 용접 공정은 수동 또는 부분 자동화 용접으로 지정된 융합 용접 공정을 포함합니다. 완전 자동화 용접 공정은 다루지 않습니다 (5.2 참조). 이 표준은 5.4에서 명시된 압연, 단조 또는 주조 재료 유형을 사용한 반제품 및 완제품의 용접 작업자 승인 시험을 다룹니다. 승인 테스트의 인증서는 검사자 또는 검사 기관의 전적인 책임으로 발급됩니다.
The article discusses the EN ISO 9606-4:1999 standard, which is about the approval testing of welders for the fusion welding of nickel and nickel alloys. The standard specifies the requirements, test conditions, acceptance criteria, and certification process for approving welder performance in this field. It aims to establish a basis for mutual recognition among examining bodies regarding welders' competence in different applications. The standard applies when the purchaser, inspection authorities, or other organizations require the welder's approval testing. It covers manual and partly mechanized welding processes but excludes fully mechanized and automatic processes. The certificate of approval testing is issued by the examiner or examining body.
記事のタイトル: EN ISO 9606-4:1999-溶接に関する溶接検査-融接溶接-パート4: ニッケルおよびニッケル合金（ISO 9606-4:1999） 記事内容: この規格は、ニッケルの溶接のための溶接作業者の性能承認試験に関する必要条件、承認範囲、試験条件、受け入れ要件、および認定を規定しています。 この規格は、ニッケルの融接溶接のための溶接作業者の承認試験に適用されます。 この規格は、異なる応用分野における溶接作業者の能力に関する検査機関間の相互承認の基礎を提供することを目的としています。関連する応用規格がより厳しい試験を指定しない限り、この規格に従って試験が実施されます。 承認試験中、溶接作業者は承認されるために、対応する溶接プロセス、材料、安全要件について十分な実務経験とジョブ知識を示す必要があります（試験は任意ではありません）。これらの側面に関する情報は付属書Aに記載されています。 この規格は、購入者、検査機関、その他の組織が溶接作業者の承認試験を要求する場合に適用されます。 この規格で言及されている溶接プロセスには、マニュアルまたは一部機械化された溶接とされる融接溶接プロセスが含まれます。完全に機械化されたおよび自動プロセスは対象外です（5.2参照）。 この規格は、5.4でリストされている鍛造または鋳造材料から作られた半製品および製品に対する溶接作業者の承認試験をカバーしています。 承認試験の証明書は、検査官または検査機関の責任のもとで発行されます。
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...