EN 13892-3:2004

Methods of test for screed materials - Part 3: Determination of wear resistance-Böhme

This European Standard specifies a method for determining the wear resistance of moulded specimens made from cementitious screed material, primarily for hard aggregate wearing screed materials or optionally for other screed materials. The method is also suitable for specimens cut from floor screed. This method is unsuitable for synthetic resin screed materials.

Prüfverfahren für Estrichmörtel und Estrichmassen - Teil 3: Bestimmung des Verschleißwiderstandes nach Böhme

Diese Europäische Norm legt ein Verfahren zur Bestimmung der Verschleißfestigkeit von aus Zementestrichmörtel geformten Prüfkörpern, hauptsächlich für Estrichmassen für die Hartstoffschicht oder wahlfrei für andere Estrichmörtel/Estrichmassen, fest. Das Verfahren ist auch für Prüfkörper geeignet, die aus verlegtem Estrich geschnitten wurden. Das Verfahren ist für Kunstharzestrichmörtel nicht geeignet.

Méthodes d'essai des matériaux pour chapes - Partie 3: Détermination de la résistance à l'usure Böhme

La présente Norme européenne spécifie une méthode permettant de déterminer la résistance à l'usure sur des éprouvettes moulées composées de matériaux pour chapes à base de ciment, principalement pour des matériaux utilisés pour les couches d'usure incorporant des granulats durs ou éventuellement pour d'autres matériaux pour chapes. Cette méthode s'applique également aux éprouvettes prélevées d'une chape. Elle ne s'applique pas aux matériaux pour chapes en résine synthétique.

Metode preskušanja mešanice za estrih – 3. del: Določevanje odpornosti proti obrabi - po Böhme

General Information

• Status: Withdrawn
• Publication Date: 04-May-2004
• Withdrawal Date: 16-Dec-2014
• ICS: 91.100.10 - Cement. Gypsum. Lime. Mortar
• Technical Committee: CEN/TC 303 - Floor screeds and in-situ floorings in buildings
• Drafting Committee: CEN/TC 303/WG 2 - Test methods
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 17-Dec-2014
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/132 - Addenda to the mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on circulation fixtures, structural bearings and floorings
• Ref Project: SIST EN 13892-3:2004 - Methods of test for screed materials - Part 3: Determination of wear resistance-Böhme

Relations

• Replaced By: EN 13892-3:2014 - Methods of test for screed materials - Part 3: Determination of wear resistance - Böhme
• Effective Date: 25-Dec-2013

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Prüfverfahren für Estrichmörtel und Estrichmassen - Teil 3: Bestimmung des Verschleißwiderstandes nach BöhmeMéthodes d'essai des matériaux pour chapes - Partie 3: Détermination de la résistance a l'usure BöhmeMethods of test for screed materials - Part 3: Determination of wear resistance-Böhme91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. MortarICS:Ta slovenski standard je istoveten z:EN 13892-3:2004SIST EN 13892-3:2004en01-julij-2004SIST EN 13892-3:2004SLOVENSKI
STANDARD



SIST EN 13892-3:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13892-3May 2004ICS 91.100.10English versionMethods of test for screed materials - Part 3: Determination ofwear resistance-BöhmeMéthodes d'essai des matériaux pour chapes - Partie 3:Détermination de la résistance à l'usure BöhmePrüfverfahren für Estrichmörtel und Estrichmassen - Teil 3:Bestimmung des Verschleißwiderstandes nach BöhmeThis European Standard was approved by CEN on 2 February 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13892-3:2004: ESIST EN 13892-3:2004



EN 13892-3:2004 (E)2ContentspageForeword.31Scope.42Normative references.43Principle.44Symbols and abbreviations.45Apparatus.56Abrasive material.57Preparation of specimens.68Testing.68.1General.68.2Determination of density.78.3Procedure.79Expression of results.710Test report.7Bibliography.11SIST EN 13892-3:2004



EN 13892-3:2004 (E)3ForewordThis document (EN 13892-3:2004) has been prepared by Technical Committee CEN/TC 303 “Floor screeds and in-situ floorings in buildings”, the secretariat o
...