EN 14424:2004

Hose fittings with screwed ferrules

This document specifies the design, materials and dimensions of hose fittings with screwed ferrules for rubber and thermoplastics hoses for use with flammable and non-flammable liquids or gases, e.g. fuel dispensing hoses, liquid natural gas (LPG) hoses, tank truck hoses and hoses for liquid and chemical chemicals. The nominal sizes covered are DN 13 to DN 40.
The maximum working pressure is 16 bar and the maximum working temperature is 65 °C.

Schlaucharmaturen mit Schraubhülsen

Diese Europäische Norm legt die Ausführung, Werkstoffe und Maße für Schlaucharmaturen mit Schraub-
hülsen für Schläuche aus Gummi und Thermoplast für brennbare und nichtbrennbare Flüssigkeiten oder
Gase, z. B. Schläuche für Zapfstellen, Schläuche für Flüssiggas (LPG), Schläuche für Tankwagen und
Schläuche für flüssige oder gasförmige Chemikalien fest. Sie gilt für die Nennweiten DN 13 bis DN 40.
Maximaler Arbeitsdruck 16 bar, maximale Arbeitstemperatur 65 °C.

Raccords pour flexibles avec bague vissée

Cevni fitingi z vijačnimi pušami

General Information

• Status: Withdrawn
• Publication Date: 16-Nov-2004
• Withdrawal Date: 18-Jun-2013
• ICS: 23.040.70 - Hoses and hose assemblies
• Technical Committee: CEN/TC 218 - Rubber and plastics hoses and hose assemblies
• Drafting Committee: CEN/TC 218/WG 1 - Rubber and plastics hoses and hose assemblies for industrial, chemical and petrochemical applications
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 19-Jun-2013
• Completion Date: 19-Jun-2013
• Ref Project: SIST EN 14424:2005 - Hose fittings with screwed ferrules

Relations

• Replaced By: EN 14424:2013 - Hose fittings with screwed ferrules
• Effective Date: 26-Jun-2013

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Schlaucharmaturen mit SchraubhülsenRaccords pour flexibles avec bague visséeHose fittings with screwed ferrules23.040.70Gumene cevi in armatureHoses and hose assembliesICS:Ta slovenski standard je istoveten z:EN 14424:2004SIST EN 14424:2005en01-marec-2005SIST EN 14424:2005SLOVENSKI
STANDARD



SIST EN 14424:2005



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14424November 2004ICS 23.040.70English versionHose fittings with screwed ferrulesRaccords pour flexibles avec bague visséeSchlaucharmaturen mit SchraubhülsenThis European Standard was approved by CEN on 30 September 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14424:2004: ESIST EN 14424:2005



EN 14424:2004 (E) 2 Contents page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Requirements.4 5 Dimensions and designation.5 6 Materials.13 7 Marking.13 8 Type approval testing and quality control.13 9 Mounting of hose fittings.14 Bibliography.15
SIST EN 14424:2005



EN 14424:2004 (E) 3 Foreword This document (EN 14424:2004) has been prepared by Technical Committee CEN/TC 218 “Rubber and plastics hoses and hose assemblies”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2005, and conflicting national standards shall be withdrawn at the latest by May 2005. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 14424:2005



EN 14424:2004 (E) 4 1 Scope This document specifies the design, materials and dimensions of hose fittings with screwed ferrules for rubber and thermoplastics hoses for use with flammable and non-flammable liquids or gases, e.g. fuel dispensing hoses, liquid natural gas (LPG) hoses, tank truck hoses and hoses for liquid and chemical chemicals. The nominal sizes covered are DN 13 to DN 40. The maximu
...