EN 14761:2006

Wood flooring - Solid wood parquet - Vertical finger, wide finger and module brick

This European Standard specifies the characteristics of solid vertical and wide finger as well as Module brick including the laying units made of softwood or hardwood for internal use as flooring. This standard covers products without surface treatments.
This standard covers also treated or untreated elements.

Holzfußböden - Massivholzparkett - Hochkantlamelle, Breitlamelle und Modulklotz

Diese Europäische Norm legt die Merkmale von Hochkant- und Breitlamellen sowie Modulklötzen aus Vollholz einschließlich der Verlegeeinheiten, die aus ihnen gebildet werden, in Eiche oder anderen geeigneten europäischen und überseeischen Laub- und Nadelholzarten ohne Oberflächenbehandlung für die Verwendung als Fußböden im Innenbereich fest.

Plancher en bois - Parquet en bois massif - Lamelle verticale, sur chant et à coupe de pierre

La présente Norme européenne définit les caractéristiques des lamelles verticales, sur chant et à coupe de pierre ainsi que des unités de pose que ces lamelles constituent, fabriquées en bois massif de chêne ou d'autres espèces européennes ou tropicales de bois durs ou tendres, sans finition, et utilisées en intérieur pour la fabrication de planchers.

Lesene talne obloge – Parket iz masivnega lesa – Pokončne lamele, prečne lamele in modularne kocke (kladice)

General Information

• Status: Withdrawn
• Publication Date: 14-Feb-2006
• Withdrawal Date: 08-Jul-2008
• ICS: 79.080 - Semi-manufactures of timber
• Technical Committee: CEN/TC 175 - Round and sawn timber
• Drafting Committee: CEN/TC 175/WG 3 - Specific user requirements
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 09-Jul-2008
• Completion Date: 09-Jul-2008
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/119 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on floorings
• Ref Project: SIST EN 14761:2006 - Wood flooring - Solid wood parquet - Vertical finger, wide finger and module brick

Relations

• Merged Into: EN 14761:2006+A1:2008 - Wood flooring - Solid wood parquet - Vertical finger, wide finger and module brick
• Effective Date: 19-Jan-2023
• Amended By: EN 14761:2006/prA1 - Wood flooring - Solid wood parquet - Vertical finger, wide finger and module brick
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Holzfußböden - Massivholzparkett - Hochkantlamelle, Breitlamelle und ModulklotzPlancher en bois - Parquet en bois massif - Lamelle verticale, sur chant et a coupe de pierreWood flooring - Solid wood parquet - Vertical finger, wide finger and module brick97.150Netekstilne talne oblogeNon-textile floor coverings79.080Polizdelki iz lesaSemi-manufactures of timberICS:Ta slovenski standard je istoveten z:EN 14761:2006SIST EN 14761:2006en01-maj-2006SIST EN 14761:2006SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14761February 2006ICS 79.080 English VersionWood flooring - Solid wood parquet - Vertical finger, wide fingerand module brickPlancher en bois - Parquet en bois massif - Lamelleverticale, sur chant et à coupe de pierreHolzfußböden - Massivholzparkett - Hochkantlamelle,Breitlamelle und ModulklotzThis European Standard was approved by CEN on 30 December 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14761:2006: ESIST EN 14761:2006

Botanical and trade names of the most commonly used species for wood flooring (hardwood and softwood species).14 Annex B (normative)
Principles for the classification of the free class.20 Bibliography.21
1 Scope This European Standard specifies the characteristics of solid vertical and wide finger as well as Module brick including the laying units made of softwood or hardwood for internal use as flooring. This standard covers products without surface treatments. This standard covers also treated or untreated elements. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 844-1:1995, Round and sawn timber – Terminology – Part 1 : General terms common to round timber and sawn timber EN 844-3:1995, Round and sawn timber – Terminology – Part 3 : General terms relating to sawn timber EN 844-4:1997, Round and sawn timber – Terminology – Part 4 : Terms relating to structure content EN 844-6:1997, Round and sawn timber – Terminology – Part 6 : Terms relating to dimensions of sawn timber EN 844-7:1997, Round and sawn timber – Terminology – Part 7 : Terms relating to anatomical structure of timber EN 844-9:1997, Round and sawn timber – Terminology – Part 9 : Terms relating to features of sawn timber EN 844-10:1998, Round and sawn timber – Terminology – Part 10 : Terms relating to stain and fungal attack EN 844-11:1998, Round and sawn timber – Terminology – Part 11 : Terms relating to degrade by insects EN 844-12:2000, Round and sawn timber – Terminology – Part 12 : Additional terms and general index EN 1310, Round and sawn timber – Method of measurement of features EN 1534, Wood and parquet flooring - Determination of resistance to indentation (Brinell) - Test method EN 13183-1, Moisture content of a piece of sawn timber - Part 1: Determination by oven dry method EN 13183-2, Moisture content of a piece of sawn timber - Part 2: Estimation by electrical resistance method EN 13647, Wood and parquet flooring and wood panelling and cladding - Determination of geometrical characteristics EN 13756:2002, Wood flooring – Terminology EN 14342, Wood flooring – Characteristics, evaluation of conformity and marking SIST EN 14761:2006

5.2.1 General rules A classification with three appearance classes is specified, designated {, ∆ and …. Tables 1 and 2 define the classification relating to appearance rules for the face of wide fingers and module bricks made of oak, beech and ash. Appearance rules for vertical fingers are given in 5.2.3. A classification named "Free class" is based on the principle laid out in Annex B. The wood shall be sound and the surface free of insect galleries. All annual growth layer as well as medullary ray are permitted. 5.2.2 Rules for wide fingers and module bricks 5.2.2.1 For Quercus spp. (oak) Rules for oak are given in Table 1. SIST EN 14761:2006

Table 1 — Classification for Quercus spp. (oak) Class Features
{ ∆∆∆∆
Sapwood Not permitted Permitted Permitted Knots a
Not permitted Not permitted Permitted Checks Not permitted Not permitted Permitted Bark pocket Not permitted Not permitted Permitted Lightning shakes Not permitted Not permitted Permitted Slope of grain Permitted Permitted Permitted Biodeterioration Not permitted Not permitted Permitted Colour variation Large variation not permitted Permitted Permitted a Sound knots not exceeding 2 mm in diameter and black knots not exceeding 1 mm in diameter are permitted, if they do not occur in clusters.
5.2.2.2 For Fraxinus excelsior (ash) and Fagus sylvatica (beech) Rules for ash and beech shall be as specified in Table 1 except for the specific features given in Table 2. Table 2 — Classification for Fraxinus excelsior (ash) and Fagus sylvatica (beech) Class Features { ∆∆∆∆ … For ash:
Sound brown heart Not permitted Permitted Permitted Sapwood Permitted Permitted Permitted For beech:
Sound red heart Not permitted Permitted Permitted
...