prEN 12196
(Main)Gymnastic equipment - Horses and bucks - Functional and safety requirements, test methods
Gymnastic equipment - Horses and bucks - Functional and safety requirements, test methods
This European Standard specifies functional requirements (see clause 3) and specific safety requirements for four types of horses and bucks (see Table 1) in addition to the general safety requirements in EN 913.
Turngeräte - Pferde und Böcke - Funktionelle und sicherheitstechnische Anforderungen, Prüfverfahren
Dieses Dokument legt funktionelle Anforderungen (siehe Abschnitt4) und besondere sicherheitstechnische Anforderungen an vier Typen von Pferden und Böcken (siehe Tabelle1) zusätzlich zu den allgemeinen sicher heitstechnischen Anforderungen in EN913 fest.
Matériel de gymnastique - Chevaux et saute-moutons - Exigences fonctionnelles et de sécurité, méthodes d'essai
Le présent document spécifie des exigences fonctionnelles (voir Article 4) ainsi que des exigences de sécurité spécifiques relatives à quatre types de chevaux et saute-moutons (voir Tableau 1) qui viennent s’ajouter aux exigences générales de sécurité de l’EN 913.
Gimnastična oprema - Konji in koze - Funkcionalne in varnostne zahteve, preskusne metode
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 12196:2023
01-marec-2023
Gimnastična oprema - Konji in koze - Funkcionalne in varnostne zahteve,
preskusne metode
Gymnastic equipment - Horses and bucks - Functional and safety requirements, test
methodsTurngeräte - Pferde und Böcke - Funktionelle und sicherheitstechnische Anforderungen,
PrüfverfahrenMatériel de gymnastique - Chevaux et saute-moutons - Exigences fonctionnelles et de
sécurité, méthodes d'essaiTa slovenski standard je istoveten z: prEN 12196
ICS:
97.220.30 Oprema za dvoranske športe Indoor sports equipment
oSIST prEN 12196:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN 12196:2023
---------------------- Page: 2 ----------------------
oSIST prEN 12196:2023
DRAFT
EUROPEAN STANDARD
prEN 12196
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2022
ICS 97.220.30 Will supersede EN 12196:2003
English Version
Gymnastic equipment - Horses and bucks - Functional and
safety requirements, test methods
Matériel de gymnastique - Chevaux et saute-moutons - Turngeräte - Pferde und Böcke - Funktionelle und
Exigences fonctionnelles et de sécurité, méthodes sicherheitstechnische Anforderungen, Prüfverfahren
d'essaiThis draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 136.If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12196:2022 E
worldwide for CEN national Members.---------------------- Page: 3 ----------------------
oSIST prEN 12196:2023
prEN 12196:2022 (E)
Contents Page
European foreword ............................................................................................................................................ 3
1 Scope .......................................................................................................................................................... 4
2 Normative references .......................................................................................................................... 4
3 Terms and definitions ......................................................................................................................... 4
4 Requirements ......................................................................................................................................... 4
4.1 Classification........................................................................................................................................... 4
4.2 Dimensions.............................................................................................................................................. 6
4.3 Performance of a padded horse and buck top ............................................................................ 7
5 Safety requirements ............................................................................................................................ 7
5.1 General...................................................................................................................................................... 7
5.2 Stability ..................................................................................................................................................... 7
5.3 Strength .................................................................................................................................................... 7
6 Test methods .......................................................................................................................................... 7
6.1 Determination of stability ................................................................................................................. 7
6.1.1 Principle ................................................................................................................................................... 7
6.1.2 Test temperature .................................................................................................................................. 7
6.1.3 Procedure ................................................................................................................................................ 8
6.1.4 Expression of result ............................................................................................................................. 8
6.2 Determination of strength ................................................................................................................. 8
6.2.1 Principle ................................................................................................................................................... 8
6.2.2 Apparatus ................................................................................................................................................ 8
6.2.3 Test temperature .................................................................................................................................. 9
6.2.4 Procedure ................................................................................................................................................ 9
6.2.5 Expression of results ........................................................................................................................... 9
7 Information to be provided by the manufacturer/supplier .................................................. 9
8 Marking .................................................................................................................................................... 9
Annex A (informative) Examples of cross sections .............................................................................. 10
Annex ZA (informative) Relationship between this European Standard and the safety
requirements of Directive 2001/95/EC aimed to be covered ............................................ 11
---------------------- Page: 4 ----------------------oSIST prEN 12196:2023
prEN 12196:2022 (E)
European foreword
This document (prEN 12196:2022) has been prepared by Technical Committee CEN/TC 136 “Sports,
playground and other recreational equipment”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.This document will supersede EN 12196:2003.
In comparison with the previous edition, the following technical modifications have been made:
a) new supplement to Figure A.2;b) editorial changes.
This document should be read in conjunction with EN 913.
In this document the Annex A is informative.
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Associati...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.