EN ISO 20957-4:2016
(Main)Stationary training equipment - Part 4: Strength training benches, additional specific safety requirements and test methods (ISO 20957-4:2016)
Stationary training equipment - Part 4: Strength training benches, additional specific safety requirements and test methods (ISO 20957-4:2016)
ISO 20957-4:2016 specifies safety requirements for stationary strength training benches and free-standing barbell racks in addition to the general safety requirements of ISO 20957‑1. It is intended to be read in conjunction with ISO 20957‑1.
ISO 20957-4:2016 is applicable to stationary training equipment type benches (type 4) (hereinafter referred to as benches) with the classes S, H and I according to ISO 20957‑1.
Stationäre Trainingsgeräte - Teil 4: Kraft-Trainingsbänke, zusätzliche besondere sicherheitstechnische Anforderungen und Prüfverfahren (ISO 20957-4:2016)
Dieses Dokument legt sicherheitstechnische Anforderungen für stationäre Kraft-Trainingsbänke und Bänke mit freistehenden Hantelablagen fest, zusätzlich zu den allgemeinen sicherheitstechnischen Anforderungen nach ISO 20957 1. Es ist vorgesehen, in Verbindung mit ISO 20957-1 gelesen zu werden.
Dieses Dokument gilt für stationäre Trainingsgeräte vom Typ Bänke (Typ 4) der Klassen S, H und I nach ISO 20957 1 (im Folgenden Bänke genannt).
Équipement d'entraînement fixe - Partie 4: Bancs pour haltères, exigences spécifiques de sécurité et méthodes d'essai supplémentaires (ISO 20957-4:2016)
ISO 20957-4:2016 spécifie les exigences de sécurité relatives aux bancs pour haltères et aux supports d'haltères autostables, qui viennent compléter les exigences générales de sécurité de l'ISO 20957‑1. Il est destiné à être lu conjointement avec l'ISO 20957‑1.
ISO 20957-4:2016 s'applique aux bancs de type appareil d'entraînement fixe (type 4) (« bancs » dans la suite du document) des classes S, H et I conformes à l'ISO 20957‑1.
Nepremična oprema za vadbo - 4. del: Klopi za vadbo moči, dodatne posebne varnostne zahteve in preskusne metode (ISO 20957-4:2016)
Ta del standarda EN 20957 določa varnostne zahteve za nepremične klopi za vadbo moči in prosto stoječa stojala za uteži, ki se uporabljajo med vadbo, poleg splošnih varnostnih zahtev standarda ISO 20957 1, pri čemer naj bi se ga bralo skupaj z njim. Ta del standarda ISO 20957 se uporablja za nepremične vadbene klopi (tip 4) (v nadaljnjem besedilu klopi) razredov S, H in I.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2017
1DGRPHãþD
SIST EN 957-4:2006+A1:2010
1HSUHPLþQDRSUHPD]DYDGERGHO .ORSL]DYDGERPRþLGRGDWQHSRVHEQH
YDUQRVWQH]DKWHYHLQSUHVNXVQHPHWRGH ,62
Stationary training equipment - Part 4: Strength training benches, additional specific
safety requirements and test methods (ISO 20957-4:2016)
Stationäre Trainingsgeräte - Teil 4: Kraft-Trainingsbänke, zusätzliche besondere
sicherheitstechnische Anforderungen und Prüfverfahren (ISO 20957-4:2016)
Équipement d'entraînement fixe - Partie 4: Bancs pour haltères, exigences spécifiques
de sécurité et méthodes d'essai supplémentaires (ISO 20957-4:2016)
Ta slovenski standard je istoveten z: EN ISO 20957-4:2016
ICS:
97.220.30 Oprema za dvoranske športe Indoor sports equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 20957-4
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2016
EUROPÄISCHE NORM
ICS 97.220.30 Supersedes EN 957-4:2006+A1:2010
English Version
Stationary training equipment - Part 4: Strength training
benches, additional specific safety requirements and test
methods (ISO 20957-4:2016)
Équipement d'entraînement fixe - Partie 4: Bancs pour Stationäre Trainingsgeräte - Teil 4: Kraft-
haltères, exigences spécifiques de sécurité et méthodes Trainingsbänke, zusätzliche besondere
d'essai supplémentaires (ISO 20957-4:2016) sicherheitstechnische Anforderungen und
Prüfverfahren (ISO 20957-4:2016)
This European Standard was approved by CEN on 7 November 2016.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20957-4:2016 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 20957-4:2016) has been prepared by Technical Committee ISO/TC 83 “Sports
and other recreational facilities and equipment” in collaboration with Technical Committee
CEN/TC 136 “Sports, playground and other recreational facilities and equipment” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2017, and conflicting national standards shall be
withdrawn at the latest by June 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN 957-4:2006+A1:2010.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 20957-4:2016 has been approved by CEN as EN ISO 20957-4:2016 without any
modification.
INTERNATIONAL ISO
STANDARD 20957-4
Second edition
2016-11-15
Stationary training equipment —
Part 4:
Strength training benches, additional
specific safety requirements and test
methods
Équipement d’entraînement fixe —
Partie 4: Bancs pour haltères, exigences spécifiques de sécurité et
méthodes d’essai supplémentaires
Reference number
ISO 20957-4:2016(E)
©
ISO 2016
ISO 20957-4:2016(E)
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved
ISO 20957-4:2016(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification . 1
5 Safety requirements . 1
5.1 General . 1
5.2 Benches with fixed barbell supports . 1
5.2.1 Stability of the barbell . 1
5.2.2 Lateral stability of benches with fixed barbell supports . 2
5.2.3 Longitudinal stability of benches with fixed barbell supports . 2
5.3 Free-standing barbell supports . 2
5.4 Dimensions of the barbell support . 2
5.5 Barbell support strength and stability . 2
5.6 Loading . 2
5.7 Barbell support . 3
6 Test methods . 3
6.1 General . 3
6.1.1 Dimensional check . 3
6.1.2 Visual examination . 3
6.1.3 Performance test . 3
6.2 Testing of rotational stability of the barbell . 3
6.3 Testing of rotational stability of benches with fixed barbell supports . 4
6.4 Testing of longitudinal stability . 4
6.5 Testing of barbell support strength and stability . 4
7 Test report . 5
ISO 20957-4:2016(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment,
as well as information about ISO’s adherence to the World Trade Organization (WTO) principles in the
Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.
ISO 20957-4 was prepared by the European Committee Standardization (CEN) Technical Committee
CEN/TC 136, Sports, playground and other recreational facilities and equipment, in collaboration with ISO
Technical Committee TC 83, Sports and other recreational facilities and equipment, in accordance with
the agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 20957-4:2005), which has been
technically revised with the following changes:
— publication as an EN ISO;
— formulation aligned with ISO 20957-1;
— Clause 5 “Safety requirements” specified and restructured;
— Clause 6 “Test methods” specified and restructured;
— normative references updated.
A list of all parts in the ISO 20957 series can be found on the ISO website.
iv © ISO 2016 – All rights reserved
ISO 20957-4:2016(E)
Introduction
This document concerns the safety of strength training benches. It is intended to be used in conjunction
with ISO 20957-1. The requirements of this document
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.