Aerospace series - Metallic materials - Rules for the drafting and presentation of dimensional standards for metallic semi-finished products

This standard specifies the rules for the drafting and presentation of metallic semi-finished dimensional standards for aerospace applications.
This standard applies to wrought semi-finished metallic products (such as sheets, plates, bars, tubes, etc.) characterized by their form within a range of standardized dimensions.

Luft- und Raumfahrt - Metallische Werkstoffe - Regeln für die Abfassung und Gestaltung von Maßnormen für metallisches Halbzeug

Diese Norm legt die Regeln für die Abfassung und Gestaltung von Maßnormen für metallisches Halbzeug für Anwendungen in der Luft- und Raumfahrt fest.
Diese Norm ist anzuwenden für metallisches Knet-Halbzeug (wie z. B. Bleche, Platten, Stangen, Rohre), dessen Form innerhalb eines Bereiches von genormten Maßen liegt.

Série aérospatiale - Matériaux métalliques - Règles pour la rédaction et la présentation des normes dimensionnelles des demi-produits métalliques

La présente norme spécifie les règles de rédaction et de présentation des normes de dimensions des demi-produits métalliques pour applications aérospatiales.
La présente norme s'applique aux demi-produits métalliques corroyés (tels que tôles, plaques, barres, tubes, etc.) caractérisés par leur forme dans une gamme de dimensions normalisées.

Aerospace series - Metallic materials - Rules for the drafting and presentation of dimensional standards for metallic semi-finished products

General Information

Status
Published
Publication Date
11-Dec-2001
Withdrawal Date
29-Jun-2002
Technical Committee
Drafting Committee
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
01-Jun-2017

Buy Standard

Standard
EN 4000:2004
English language
32 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Metallic materials - Rules for the drafting and presentation of dimensional standards for metallic semi-finished productsLuft- und Raumfahrt - Metallische Werkstoffe - Regeln für die Abfassung und Gestaltung von Maßnormen für metallisches HalbzeugSérie aérospatiale - Matériaux métalliques - Regles pour la rédaction et la présentation des normes dimensionnelles des demi-produits métalliquesAerospace series - Metallic materials - Rules for the drafting and presentation of dimensional standards for metallic semi-finished products49.025.05Železove zlitine na splošnoFerrous alloys in generalICS:Ta slovenski standard je istoveten z:EN 4000:2001SIST EN 4000:2004en01-maj-2004SIST EN 4000:2004SLOVENSKI
STANDARD



SIST EN 4000:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 4000December 2001ICS 49.025.05; 49.025.15English versionAerospace series - Metallic materials - Rules for the drafting andpresentation of dimensional standards for metallic semi-finishedproductsSérie aérospatiale - Matériaux métalliques - Règles pour larédaction et la présentation des normes dimensionnellesdes demi-produits métalliquesLuft- und Raumfahrt - Metallische Werkstoffe - Regeln fürdie Abfassung und Gestaltung von Maßnormen fürmetallisches HalbzeugThis European Standard was approved by CEN on 2 May 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 4000:2001 ESIST EN 4000:2004



EN 4000:2001 (E)2ForewordThis European Standard has been prepared by the European Association of Aerospace Manufacturers(AECMA).After inquiries and votes carried out in accordance with the rules of this Association, this Standard hasreceived the approval of the National Associations and the Official Services of the member countries ofAECMA, prior to its presentation to CEN.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by June 2002, and conflicting national standards shall be withdrawn atthe latest by June 2002.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark,Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal,Spain, Sweden, Switzerland and the United Kingdom.Contents listPage0Introduction.31Scope.32Normative references.33Definitions.34Indication of dimensional tolerances.45Arrangement.66Rules common to all forms of metallic semi-finished products.77Rules applicable to sheet and plate.98Rules applicable to strip.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.