EN 12572-1:2007

Artificial climbing structures - Part 1: Safety requirements and test methods for ACS with protection points

This European Standard specifies the safety requirements and test methods for artificial climbing structures with protection points (hereafter referred to as ACS).
This European Standard is applicable for ACS in normal use for sport climbing.
This European Standard is not applicable to ice climbing, dry tooling and playground equipment.

Künstliche Kletteranlagen - Teil 1: Sicherheitstechnische Anforderungen und Prüfverfahren für KKA mit Sicherungspunkten

Diese Europäische Norm legt die sicherheitstechnischen Anforderungen und Prüfverfahren von künstlichen Kletteranlagen mit Sicherungspunkten fest (im nachfolgenden KKA genannt).
Diese Europäische Norm gilt für den üblichen Gebrauch der KKA im Bereich des Sportkletterns.
Diese Europäische Norm gilt nicht für Eisklettern, "Drytooling" (Eisklettern an künstlichen Wänden) und Spielplatzgeräte.

Structures artificielles d'escalade - Partie 1 : Exigences de sécurité et méthodes d'essai relatives aux SAE avec points d'assurage

La présente Norme européenne spécifie les exigences de sécurité et méthodes d’essai applicables aux structures artificielles d’escalade avec points d’assurage (ci-après appelées SAE).
La présente Norme européenne est applicable aux SAE dans le cadre d’une utilisation normale en escalade.
La présente Norme européenne ne s’applique ni aux techniques d’escalade sur glace ou «dry tooling», ni aux équipements d’aires de jeux.

Umetne plezalne stene – 1. del: Varnostne zahteve in preskusne metode za umetne plezalne stene z varovalnimi točkami

General Information

• Status: Withdrawn
• Publication Date: 03-Apr-2007
• Withdrawal Date: 03-Jan-2017
• ICS: 97.220.10 - Sports facilities
• Technical Committee: CEN/TC 136 - Sports, playground and other recreational equipment
• Drafting Committee: CEN/TC 136/WG 9 - Artificial climbing structures
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 04-Jan-2017
• Ref Project: SIST EN 12572-1:2007 - Artificial climbing structures - Part 1: Safety requirements and test methods for ACS with protection points

Relations

• Replaced By: EN 12572-1:2017 - Artificial climbing structures - Part 1: Safety requirements and test methods for ACS with protection points
• Effective Date: 11-Jan-2017

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Artificial climbing structures - Part 1: Safety requirements and test methods for ACS with protection pointsStructures artificielles d'escalade - Partie 1 : Exigences de sécurité et méthodes d'essai relatives aux SAE avec points d'assurageKünstliche Kletteranlagen - Teil 1: Sicherheitstechnische Anforderungen und Prüfverfahren für KKA mit SicherungspunktenTa slovenski standard je istoveten z:EN 12572-1:2007SIST EN 12572-1:2007en;fr;de97.220.10Športni objektiSports facilitiesICS:SLOVENSKI
STANDARDSIST EN 12572-1:200701-julij-2007

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12572-1April 2007ICS 97.220.10 English VersionArtificial climbing structures - Part 1: Safety requirements andtest methods for ACS with protection pointsStructures artificielles d'escalade - Partie 1: Exigences desécurité et méthodes d'essai pour SAE avec points deprotectionKünstliche Kletteranlagen - Teil 1: SicherheitstechnischeAnforderungen und Prüfverfahren für KKA mitSicherungspunktenThis European Standard was approved by CEN on 24 February 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12572-1:2007: E

Effects.13 A.1 Permanent effects.13 A.2 Variable effects.13 A.2.1 General.13 A.2.2 User loads.13 A.2.3 Snow loads.13 A.2.4 Wind loads.14 A.2.5 Effects of temperature.14 A.2.6 Special loads.14 Annex B (normative)
Method of calculation of structural integrity.15 B.1 General principles.15 B.1.1 Limit state.15 B.1.2 Ultimate limit state.15 B.2 Combination effects for the ultimate limit state.16 B.3 Structural stability.16 Annex C (normative)
Load testing of structural integrity of protection point connections.17 C.1 General.17 C.2 Apparatus.17 C.3 Sampling.17 C.4 Procedure.17 Annex D (normative)
Impact test of surface elements.18 D.1 General.18 D.2 Apparatus.18 D.3 Sampling.18 D.4 Procedure.18 Annex E (normative)
Hold insert resistance test.21 E.1 General.21 E.2 Apparatus.21 E.3 Sampling.21 E.4 Procedure.21

Proof testing.23 F.1 General.23 F.2 Procedure.23 F.2.1 General.23 F.2.2 Protection points.23 Annex G (normative)
Inspection and maintenance.26 Bibliography.28
...