EN ISO 14880-1:2019
(Main)Optics and photonics - Microlens arrays - Part 1: Vocabulary (ISO 14880-1:2019)
Optics and photonics - Microlens arrays - Part 1: Vocabulary (ISO 14880-1:2019)
This document defines terms for microlens arrays. It applies to arrays of very small lenses formed inside or on one or more surfaces of a common substrate. This document also applies to systems of microlens arrays.
Optik und Photonik - Mikrolinsenarrays - Teil 1: Begriffe (ISO 14880-1:2019)
Dieses Dokument definiert Begriffe für Mikrolinsenarrays. Er gilt für Arrays sehr kleiner Linsen, die innerhalb oder auf einer oder mehreren Seiten eines gemeinsamen Substrates ausgebildet sind. Dieses Dokument gilt auch für Systeme aus Mikrolinsenarrays.
Optique et photonique - Réseaux de microlentilles - Partie 1: Vocabulaire (ISO 14880-1:2019)
Le présent document définit les termes relatifs aux réseaux de microlentilles. Il s'applique aux réseaux de très petites lentilles formées à l'intérieur ou sur une ou plusieurs surfaces d'un substrat commun. Le présent document s'applique également aux systèmes de réseaux de microlentilles.
Optika in fotonska tehnologija - Vrste mikroleč - 1. del: Slovar (ISO 14880-1:2019)
Ta dokument določa pogoje za vrste mikroleč. Uporablja se za vrste mikroleč, ki so sestavljene iz zelo majhnih leč znotraj ali na eni ali več površinah običajnega substrata. Dokument se uporablja tudi za sisteme vrst mikroleč.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2019
Nadomešča:
SIST EN ISO 14880-1:2016
Optika in fotonska tehnologija - Vrste mikroleč - 1. del: Slovar (ISO 14880-1:2019)
Optics and photonics - Microlens arrays - Part 1: Vocabulary (ISO 14880-1:2019)
Optik und Photonik - Mikrolinsenarrays - Teil 1: Begriffe (ISO 14880-1:2019)
Optique et photonique - Réseaux de microlentilles - Partie 1: Vocabulaire (ISO 14880-
1:2019)
Ta slovenski standard je istoveten z: EN ISO 14880-1:2019
ICS:
01.040.31 Elektronika (Slovarji) Electronics (Vocabularies)
31.260 Optoelektronika, laserska Optoelectronics. Laser
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 14880-1
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2019
EUROPÄISCHE NORM
ICS 01.040.31; 31.260 Supersedes EN ISO 14880-1:2016
English Version
Optics and photonics - Microlens arrays - Part 1:
Vocabulary (ISO 14880-1:2019)
Optique et photonique - Réseaux de microlentilles - Optik und Photonik - Mikrolinsenarrays - Teil 1:
Partie 1: Vocabulaire (ISO 14880-1:2019) Begriffe (ISO 14880-1:2019)
This European Standard was approved by CEN on 10 June 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14880-1:2019 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 14880-1:2019) has been prepared by Technical Committee ISO/TC 172 "Optics
and photonics" in collaboration with Technical Committee CEN/TC 123 “Lasers and photonics” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2020, and conflicting national standards shall
be withdrawn at the latest by January 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 14880-1:2016.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 14880-1:2019 has been approved by CEN as EN ISO 14880-1:2019 without any
modification.
INTERNATIONAL ISO
STANDARD 14880-1
Third edition
2019-06
Optics and photonics — Microlens
arrays —
Part 1:
Vocabulary
Optique et photonique — Réseaux de microlentilles —
Partie 1: Vocabulaire
Reference number
ISO 14880-1:2019(E)
©
ISO 2019
ISO 14880-1:2019(E)
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
ISO 14880-1:2019(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 Symbols and units of measure . 2
3.2 Basic definitions of microlens and microlens array . 2
3.3 General terms and definitions . 3
3.4 Terms relating to properties of the microlens array . 6
3.4.1 Geometrical properties . 6
3.4.2 Optical properties . 7
4 Coordinate system . 8
5 Properties of individual lenses . 9
Annex A (informative) Microlens array applications (1) — Telecommunications .11
Annex B (informative) Microlens array applications (2) — Image sensor arrays .12
Annex C (informative) Microlens array applications (3) — LCD projection panels .13
Annex D (informative) Microlens array applications (4) — Wavefront sensors .14
Annex E (informative) Microlens array applications (5) — Stereo displays .17
Annex F (informative) Microlens array applications (6) — 3D imaging and light-field cameras .18
Bibliography .20
ISO 14880-1:2019(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso
.org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 172, Optics and Photonics, Subcommittee
SC 9, Laser and electro-optical systems.
This third edition cancels and replaces the second edition (ISO 14880-1:2016), which has been
technically revised.
A list of all parts in the ISO 14880 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/members .html.
iv © ISO 2019 – All rights reserved
ISO 14880-1:2019(E)
Introduction
The expanded market in microlens arrays has generated a need to agree on basic terms and definitions
for microlens arrays and systems and this document aims to satisfy that need.
This document aims to improve the compatibility and interchangeability of lens arrays from different
suppliers and to enhance the development of technology using microlens arrays.
[1]
Microoptics and microlens arrays are found in many modern optical devices . They are used as coupling
optics for detector arrays, the digital camera being an example of a mass market application. They are
used to enhance the optical performance of liquid crystal displays, to couple arrays of light sources
and to direct illumination for example in 2D and 3D television, mobile phone and portable computer
displays. Microlens arrays are used in wavefront sensors for optical metrology and astronomy, lightfield
sensors for three–dimensional photography and microscopy and in optical parallel processor elements.
Multiple arrays of microlenses can be assembled to form optical systems such as optical condensers,
[2][3]
controlled diffusers and superlenses . Furthermore, arrays of microoptical elements such as
[4][5]
micro-prisms and micro-mirrors are used .Examples of some of these applications are described in
Annexes A to F.
INTERNATIONAL STANDARD ISO 14880-1:2019(E)
Optics and photonics — Microlens arrays —
Part 1:
Vocabulary
1 Scope
This document defines terms for microlens arrays. It applies to arrays of very small lenses formed
inside or on one or more surfaces of a common substrate. This document also applies to systems of
microlens arrays.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https: //www .iso .org/obp
— IEC Electropedia: available at http: //www .electropedia .org/
NOTE 1 The coordinate system used for the description of the microlenses can be found in Figure 1. The
description of the coordinate system and its application can be found in Clause 4.
Key
1 substrate
2 microlenses
Figure 1 — Microlens array with Cartesian coordinate system
ISO 14880-1:2019(E)
NOTE 2 Five common types of microlenses are illustrated in Figure 5, and descri
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.