EN 1281-1:1997

Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets

This Part of this European Standard specifies dimensional and gauging requirements for cones and sockets and performance requirements for latching connectors intended for use in medical devices, e.g. in breathing systems, anaesthetic gas scavenging systems and vaporizers.  This European Standard does not specify the medical devices and accessories on which these connectors are to be provided.   NOTE 1: It is expected that requirements on the use of suitable materials and for the application of this standard will be included in particular standards for specific medical devices and accessories.   NOTE 2: Requirements for screw-threaded weight-bearing conical connectors are specified in Part 2 of this standard.

Anästhesie- und Beatmungsgeräte - Konische Konnektoren - Teil 1: Männliche und weibliche Konen

Dieser Teil dieser Europäischen Norm legt Anforderungen an Masse und Lehren für männliche und weibliche Konen und Leistungsanforderungen für Schnapp- konnerktoren zur Verwendung in medizinischen Geräten fest, z B. in AtemsystemenAnästhesiegasfortleitungssystemen und Verdunstën. Diese Europäischen Norm legt keine Anforderungen für medizinische Geräte und Zubehör fest, bei denen diese Konnektoren zu verwenden sind.

Matériel respiratoire et d'anesthésie - Raccords coniques - Partie 1: Raccords mâles et femelles

La présente norme européenne spécifie les prescriptions fondamentales concernant les dimensions et les calibres pour les raccords mâles et femelless, ainsi queles prescriptions relatives aux performances des raccords avec système de blo- cage destinés aux disposifs médicaux : systèmes respiratoire, système d'évacu- ation de gaz d'anesthésie en excès et évaporateurs, par exemple. Cette norme ne spécifie pas quels sont les dispositifs médicaux et les accessoires sur lesquels ces raccords doivent être montés.

Anestezijska in dihalna oprema - Stožčasti priključki - 1. del: Vtikači in vtičnice

General Information

• Status: Withdrawn
• Publication Date: 21-Jan-1997
• Withdrawal Date: 14-May-2004
• ICS: 11.040.10 - Anaesthetic, respiratory and reanimation equipment
• Technical Committee: CEN/TC 215 - Respiratory and anaesthetic equipment
• Drafting Committee: CEN/TC 215/WG 1 - Anaesthetic machines, medical breathing systems and anaesthetic gas scavenging systems
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-May-2004
• Completion Date: 15-May-2004
• Directive: 93/42/EEC - Council Directive 93/42/EEC of 14 June 1993 concerning medical devices
• Mandate: M/023 - Standardization mandate to CEN/CENELEC concerning the development of European standards relating to medical devices
• Ref Project: SIST EN 1281-1:2000 - Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets

Relations

• Amended By: EN 1281-1:1997/A1:1998 - Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 5356-1:2004 - Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets (ISO 5356-1:2004)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Anästhesie- und Beatmungsgeräte - Konische Konnektoren - Teil 1: Männliche und weibliche KonenMatériel respiratoire et d'anesthésie - Raccords coniques - Partie 1: Raccords mâles et femellesAnaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets11.040.10Anestezijska, respiratorna in reanimacijska opremaAnaesthetic, respiratory and reanimation equipmentICS:Ta slovenski standard je istoveten z:EN 1281-1:1997SIST EN 1281-1:2000en01-januar-2000SIST EN 1281-1:2000SLOVENSKI
STANDARD
...