iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

FprEN ISO 12643-4

(Main)

Graphic technology - Safety requirements for graphic technology equipment and systems - Part 4: Converting equipment and systems (ISO/FDIS 12643-4:2023)

Graphic technology - Safety requirements for graphic technology equipment and systems - Part 4: Converting equipment and systems (ISO/FDIS 12643-4:2023)

This document deals with all significant hazards, hazardous situations or hazardous events relevant to converting equipment and systems used in the corrugated board, package printing, converting and graphic technology industries (see Clause 5), when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
This document is applicable to converting equipment not covered by other parts of ISO 12643.
This document is not applicable to the machinery or machinery components manufactured before the date of its publication.

Graphische Technik - Sicherheitsanforderungen an Ausrüstungen und Systeme der graphischen Technik - Teil 4: Ausrüstungen und Systeme der Papierverarbeitung (ISO/FDIS 12643-4:2023)

Technologie graphique - Exigences de sécurité pour les systèmes et l'équipement de technologie graphique - Partie 4: Systèmes et équipement de façonnage (ISO/FDIS 12643-4:2023)

Le présent document traite de tous les phénomènes dangereux, situations dangereuses ou événements dangereux significatifs concernant les systèmes et l'équipement de façonnage utilisés dans les secteurs du carton ondulé, de l'impression d'emballage, du façonnage et des technologies graphiques (voir Article 5), lorsqu'ils sont utilisés conformément à l'usage prévu et en cas de mauvais usage raisonnablement prévisible du point de vue du fabricant.
Le présent document est applicable à l'équipement de façonnage non couvert par d'autres parties de l'ISO 12643.
Le présent document n'est pas applicable aux machines et aux composants de machines fabriqués avant sa date de publication.

Grafična tehnologija - Varnostne zahteve za grafično tehnološko opremo in sisteme - 4. del: Oprema in sistemi za predelavo, dodelavo in oplemenitenje (ISO/FDIS 12643-4:2023).

General Information

Status
Not Published
Publication Date
12-Dec-2023
ICS
37.100.10 - Reproduction equipment
Technical Committee
CEN/TC 198 - Printing and paper machinery - Safety
Drafting Committee
CEN/TC 198/WG 1 - Printing and paper converting machines - Drafting of safety standards
Current Stage
6055 - CEN Ratification completed (DOR) - Publishing
Start Date
19-Nov-2023
Completion Date
19-Nov-2023
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
Mandate
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
kSIST FprEN ISO 12643-4:2023 - Graphic technology - Safety requirements for graphic technology equipment and systems - Part 4: Converting equipment and systems (ISO/FDIS 12643-4:2023)

Relations

Revises
EN 1010-5:2005 - Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 5: Machines for the production of corrugated board and machines for the conversion of flat and corrugated board
Effective Date
28-Jan-2023
Revises
EN 1010-4:2004+A1:2009 - Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines
Effective Date
28-Jan-2023

Buy Standard

k FprEN ISO 12643-4:2023k FprEN ISO 12643-4:2023
PreviousNext
Draft
k FprEN ISO 12643-4:2023
English language
90 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
kSIST FprEN ISO 12643-4:2023
01-november-2023
Grafična tehnologija - Varnostne zahteve za grafično tehnološko opremo in
sisteme - 4. del: Oprema in sistemi za predelavo, dodelavo in oplemenitenje
(ISO/FDIS 12643-4:2023).
Graphic technology - Safety requirements for graphic technology equipment and
systems - Part 4: Converting equipment and systems (ISO/FDIS 12643-4:2023)
Graphische Technik - Sicherheitsanforderungen an Ausrüstungen und Systeme der
graphischen Technik - Teil 4: Ausrüstungen und Systeme der Papierverarbeitung
(ISO/FDIS 12643-4:2023)
Technologie graphique - Exigences de sécurité pour les systèmes et l'équipement de
technologie graphique - Partie 4: Systèmes et équipement de façonnage (ISO/FDIS
12643-4:2023)
Ta slovenski standard je istoveten z: FprEN ISO 12643-4
ICS:
37.100.10 Reprodukcijska oprema Reproduction equipment
kSIST FprEN ISO 12643-4:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
kSIST FprEN ISO 12643-4:2023

---------------------- Page: 2 ----------------------
kSIST FprEN ISO 12643-4:2023
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 12643-4
ISO/TC 130
Graphic technology — Safety
Secretariat: SAC
requirements for graphic technology
Voting begins on:
2023-08-23 equipment and systems —
Voting terminates on:
Part 4:
2023-10-18
Converting equipment and systems
Technologie graphique — Exigences de sécurité pour les systèmes et
l'équipement de technologie graphique —
Partie 4: Systèmes et équipement de façonnage
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 12643-4:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 3 ----------------------
kSIST FprEN ISO 12643-4:2023
ISO/FDIS 12643-4:2023(E)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 12643-4
ISO/TC 130
Graphic technology — Safety
Secretariat: SAC
requirements for graphic technology
Voting begins on:
equipment and systems —
Voting terminates on:
Part 4:
Converting equipment and systems
Technologie graphique — Exigences de sécurité pour les systèmes et
l'équipement de technologie graphique —
Partie 4: Systèmes et équipement de façonnage
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
ISO/CEN PARALLEL PROCESSING
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: +41 22 749 01 11
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: copyright@iso.org
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 12643-4:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
  © ISO 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 4 ----------------------
kSIST FprEN ISO 12643-4:2023
ISO/FDIS 12643-4:2023(E)
Contents Page
Foreword .viii
Introduction .x
1 Scope . 1
2 Normative references .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 1010-1:2004+A1:2010(Main)
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements
SIST EN 1010-1:2005+A1:2011

1.1   This document applies to:
-   printing machines for printing on paper and similar materials, including screen printing presses; equipment used in the preparation of the printing process and additional equipment on printing machines are also considered to be printing machines. This standard also covers machinery used for the handling of paper, products, printing formes and inks (before and after the printing process) as well as machinery for cleaning printing formes and checking the print quality (auxiliary printing machinery).
-   paper converting machines, i. e. machines to process, convert or finish paper, board and similar materials which are processed, converted or finished in a similar manner.
NOTE   Similar substrates are, for example, board, corrugated board, plastic film, aluminium foil, sheet metal and photographic paper.
1.2   This document deals with all common significant hazards relevant to printing and paper converting machinery when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4).
1.3   This document is not applicable to printing and paper converting machines which are manufactured before the date of publication of this document by CEN.
1.4   This document does not apply to:
-   winder-slitters and sheeters in paper finishing (sheeters with unwinders) (see EN 1034-1:2000,
EN 1034-3:2000, EN 1034-5:2005);
-   office-type collating machines equipped with friction feeders;
-   mail processing machines;
-   machines used for filling packages (such as machines for shaping, filling, and closing the package);
-   textile printing presses.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1010-2:2006+A1:2010(Main)
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery
SIST EN 1010-2:2006+A1:2010

This document applies to:
-   Pre-press machinery (machinery and devices for the production of master copies and printing forms):
-   exposure equipment for the production of films and printing forms;
-   equipment for developing films and printing forms;
-   washing machines for printing forms;
-   machines for bending printing forms;
-   punching machines for film and printing forms;
-   cutting machines for film and printing forms;
-   machines for the production of gravure printing forms;
-   scanners.
-   Printing and varnishing machines:
-   proofing presses;
-   sheet-fed printing presses and varnishing machines including digital printing presses;
-   web-fed rotary presses and varnishing machines including digital printing presses;
-   screen printing presses.
-   Auxiliary devices:
-   cylinder and roller washing devices;
-   continuous flow drying devices;
-   powder spraying devices;
-   auxiliary devices on inking and damping units;
-   automatic plate clamping devices;
-   washing equipment for printing forms, rollers and scrapers;
-   pile turners;
-   measuring and control devices.
This document shall be used together with !EN 1010-1:2004+A1". Both parts together identify all significant hazards relevant to printing and varnishing machines including pre-press machinery and auxiliary devices, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). The specific requirements specified in prEN 1010-2 take precedence over respecti¬ve requirements in this standard.
This document does not deal with risks generated by noise emitted from the machines. These issues are fundamentally covered in EN 1010-1:2004+A1.
This document does not apply to high-pressure cleaning devices and screen printing presses for textile substrates.
This document is not applicable to printing and varnishing machines including pre-press machinery which are manufactured before the date of publication of this document by CEN.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13023:2003+A1:2010(Main)
Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3
SIST EN 13023:2004+A1:2010

This standard specifies all the information necessary to carry out efficiently and under standardized conditions the determination, declaration and verification of airborne noise emission from printing and paper converting machines covered by the EN 1010 series and from paper making and finishing machines covered by the EN 1034 series. It specifies noise measurement methods and installation and operating conditions to be used for the test.
This standard applies to those machines listed in the normative annexes A to J. The principles of this noise test code should be applied as far as possible also for the determination of noise emission of machines and machine parts not listed in the normative annexes A to J. In such cases, all information relating to assembly, installation and operating conditions as well as the arrangement of work stations should be recorded and reported in the test report.
Noise emission characteristics include emission sound pressure levels at work stations and the sound power level. Declared noise emission values permit comparison of printing and paper machines on the market.
The use of this noise test code ensures the reproducibility of the determination of the characteristic noise emissions within specific limits. These limits are determined by the accuracy grade of the noise measuring method used. Noise measurements specified by this standard are carried out by the engineering method (accuracy grade 2) and the survey method (accuracy grade 3).

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1010-3:2002+A1:2009(Main)
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines
SIST EN 1010-3:2003+A1:2009

1.1   This European Standard applies to cutting machines used in paper converting:
-   guillotines;
-    three-knife trimmers;
-    index cutting machines;
-   trimmers;
-   rotary cutters;
-   round cornering machines;
-   label punching machines.
This European Standard is only applicable in conjunction with !EN 1010-1:2004+A1". Both parts together identify all significant hazards relevant to the cutting machines when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). The specific requirements of this European Standard take precedence over respective requirements of !EN 1010-1:2004+A1".
This European Standard is not applicable to cutting machines manufactured before the publication of this European Standard by CEN.
1.2   This standard does not apply to winder-slitters or sheeters (see EN 1034-1, EN 1034-3, prEN 1034-5).

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1010-4:2004+A1:2009(Main)
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines
SIST EN 1010-4:2004+A1:2009

This document applies to
-   bookbinding machines:
-   stitching, riveting, eyeletting and attaching machines;
-   gang stitchers;
-   gathering machines;
-   perfect binders;
-   paper drills;
-   book signature presses;
-   book presses;
-   sheet folding machines;
-   book production lines for the production of books with hard covers;
-   back rounding and pressing machines;
-   backlining and head banding machines;
-   casing-in machines;
-   book cover crease forming machines.
-   paper converting machines:
-   machines for the production of envelopes;
-   machines for the production of sanitary items;
-   inserting machines;
-   counter-stackers;
-   paper embossing machines.
-   paper finishing machines:
-   coaters;
-   laminators.
This document shall be used together with EN 1010-1:2004+A1. Both parts together identify all significant hazards relevant to bookbinding, paper converting and paper finishing machines when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). The specific requirements in EN 1010 4 take precedence over respective requirements in EN 1010-1:2004+A1.
This document does not deal with risks generated by noise emitted from the machines. These issues are covered basically in EN 1010-1:2004+A1. However, for machines like sheet folding machines and machines for the production of envelopes and sanitary items, some specific proposals for noise reduction measures are given.
This document is not applicable to bookbinding, paper converting and finishing machines manufactured before the date of publication of this document by CEN.

  • Standard
    70 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
FprEN ISO 12643-3(Main)
Graphic technology - Safety requirements for graphic technology equipment and systems - Part 3: Binding and finishing equipment and systems (ISO/FDIS 12643-3:2023)
oSIST prEN ISO 12643-3:2014

This document provides safety requirements specific to binding and finishing equipment and systems. It provides additional safety requirements for the design and construction of new equipment used to convert printed or blank substrates into cut, folded, collated, assembled, bound, or otherwise finished product.
This document is applicable to processes for preparing substrate for the printing process. It is also applicable to a wide range of equipment used in the binding and finishing process.

  • Draft
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
FprEN ISO 12643-5(Main)
Graphic technology - Safety requirements for graphic technology equipment and systems - Part 5: Manually-fed stand-alone platen presses (ISO/FDIS 12643-5:2023)
kSIST FprEN ISO 12643-5:2023

This document provides safety requirements specific to stand-alone platen presses.
This document provides additional safety requirements for the design and construction of manually-fed stand-alone platen presses, for single stroke mode, dwell mode, and continuous operation mode for cutting and creasing, embossing, foil stamping and/or printing of paper, board and other materials processed in a similar manner.
This document does not apply to presses designed to handle metal material other than foil.

  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
FprEN ISO 12643-1(Main)
Graphic technology - Safety requirements for graphic technology equipment and systems - Part 1: General requirements (ISO/FDIS 12643-1:2023)
kSISTF prEN ISO 12643-1:2020

This document provides safety specifications for the design and construction of new equipment used in prepress systems, printing press systems, binding and finishing systems, converting systems, corrugated board manufacturing systems and stand‑alone platen presses. It is applicable to equipment used in stand-alone mode, or in combination with other machines, including ancillary equipment, in which all the machine actuators (e.g. drives) of the equipment are controlled by the same control system.
The requirements given in this document are applicable to the equipment covered by ISO 12643 (all parts), unless otherwise noted. This document is intended to be used in conjunction with the applicable part of ISO 12643 that contains additional requirements specific to a particular type of equipment.
This document addresses recognized significant hazards specific to equipment and systems in the following areas:
—     mechanical;
—     electrical;
—     slipping, tripping, falling;
—     ergonomics;
—     noise;
—     UV and laser radiation;
—     fire and explosion;
—     thermal;
—     substances and material used for processing;
—     failure, malfunction of control system;
—     other types of emissions [e.g. ozone, ink mist, volatile organic compounds (VOCs), etc.].
This document is not applicable to:
—     equipment manufactured before the date of its publication;
—     ordinary office equipment for digital printing and paper processing, such as digital printers, copiers, sorters, binders and staplers, which is intended for use outside the printing and paper industry;
—     winder-slitters and sheeters in paper finishing (sheeters with unwinders);
—     office-type collating machines equipped with friction feeders;
—     mail processing machines;
—     machines used for filling packages (such as machines for shaping, filling, and closing the package); and
—     textile printing presses.
The safety principles established in this document can also be applicable to the design of equipment within areas of technology that are not specified in ISO 12643 (all parts).

  • Draft
    113 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
FprEN ISO 12643-2(Main)
Graphic technology - Safety requirements for graphic technology equipment and systems - Part 2: Prepress and press equipment and systems (ISO/FDIS 12643-2:2023)
kSIST FprEN ISO 12643-2:2020

This document provides safety requirements specific to prepress and press equipment and systems.
This document provides additional safety requirements for the design and construction of new prepress and press equipment, and the auxiliary equipment integrated into the press control system.
This document is not applicable to prepress and press equipment and systems manufactured before the date of its publication.

  • Draft
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN ISO 12643-3(Main)
Graphic technology - Safety requirements for graphic technology equipment and systems - Part 3: Binding and finishing equipment and systems (ISO/DIS 12643-3:2020)
oSIST prEN ISO 12643-3:2020

This part of ISO 12643 provides safety requirements specific to binding and finishing equipment and systems. This part of ISO 12643 shall be used in conjunction with ISO 12643-1. It is intended to be used in conjunction with the general requirements given in ISO 12643-1.
This part of ISO 12643 provides additional safety requirements for the design and construction of new equipment used to convert printed or blank substrates into cut, folded, collated, assembled, bound, or otherwise finished product. It can also be applicable to processes for preparing substrate for the printing process.
It is applicable to a wide range of equipment used in the binding and finishing process.

  • Draft
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day