EN 4904:2022

Aerospace series - Steel 36NiCrMo16 (1.6773) - 1 000 MPa ≤ Rm ≤ 1 200 MPa - Bars - 100 mm ≤ D ≤ 250 mm

This document specifies the requirements relating to:
Steel 36NiCrMo16
1 000 MPa ≤ Rm ≤ 1 200 MPa
Bars
100 mm ≤ D ≤ 250 mm
for aerospace applications.

Luft- und Raumfahrt - Stahl 36NiCrMo16 (1.6773) - 1 000 MPa ≤ Rm ≤ 1 200 MPa - Stangen - 100 mm ≤ D ≤ 250 mm

Dieses Dokument legt die Anforderungen an:
Stahl 36NiCrMo16 (1.6773)
1 000 MPa ≤ Rm ≤ 1 200 MPa
Stangen
100 mm ≤ D ≤ 250 mm
für Anwendungen in der Luft- und Raumfahrt fest.

Série aérospatiale - Acier 36NiCrMo16 (1.6773) - 1 000 MPa ≤ Rm ≤ 1 200 MPa - Barres - 100 mm ≤ D ≤ 250 mm

Le présent document spécifie les exigences relatives à :
Acier 36NiCrMo16
1 000 MPa ≤ Rm ≤ 1 200 MPa
Barres
100 mm ≤ D ≤ 250 mm
pour les applications aérospatiales.

Aeronavtika - Jeklo 36NiCrMo16 (1.6773) - 1000 MPa ≤ Rm ≤ 1200 MPa - Palice - 100 mm ≤ D ≤ 250 mm

Ta dokument določa zahteve, ki se navezujejo na:
jeklo 36NiCrMo16,
1000 MPa ≤ Rm ≤ 1200 MPa,
palice,
100 mm ≤ D ≤ 250 mm,
za uporabo v aeronavtiki.

General Information

• Status: Published
• Publication Date: 20-Dec-2022
• ICS: 49.025.10 - Steels
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4/S 3 - Steels & Heat Resisting Alloys
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 21-Dec-2022
• Completion Date: 21-Dec-2022
• Ref Project: SIST EN 4904:2023 - Aerospace series - Steel 36NiCrMo16 (1.6773) - 1 000 MPa ≤ Rm ≤ 1 200 MPa - Bars - 100 mm ≤ D ≤ 250 mm

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 4904:2023
01-marec-2023
Aeronavtika - Jeklo 36NiCrMo16 (1.6773) - 1000 MPa ≤ Rm ≤ 1200 MPa - Palice - 100
mm ≤ D ≤ 250 mm
Aerospace series - Steel 36NiCrMo16 (1.6773) - 1 000 MPa ≤ Rm ≤ 1 200 MPa - Bars -
100 mm ≤ D ≤ 250 mm
Luft- und Raumfahrt - Stahl 36NiCrMo16 (1.6773) - 1 000 MPa ≤ Rm ≤ 1 200 MPa -
Stangen - 100 mm ≤ D ≤ 250 mm
Série aérospatiale - Acier 36NiCrMo16 (1.6773) - 1 000 MPa ≤ Rm ≤ 1 200 MPa - Barres
- 100 mm ≤ D ≤ 250 mm
Ta slovenski standard je istoveten z: EN 4904:2022
ICS:
49.025.10 Jekla Steels
SIST EN 4904:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 4904:2023

---------------------- Page: 2 ----------------------
SIST EN 4904:2023


EN 4904
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2022
EUROPÄISCHE NORM
ICS 49.025.10
English Version

Aerospace series - Steel 36NiCrMo16 (1.6773) - 1 000 MPa
≤ Rm ≤ 1 200 MPa - Bars - 100 mm ≤ D ≤ 250 mm
Série aérospatiale - Acier 36NiCrMo16 (1.6773) - 1 000 Luft- und Raumfahrt - Stahl 36NiCrMo16 (1.6773) - 1
MPa ≤ Rm ≤ 1 200 MPa - Barres - 100 mm ≤ D ≤ 250
000 MPa ≤ Rm ≤ 1 200 MPa - Stangen - 100 mm ≤ D ≤
mm 250 mm
This European Standard was approved by CEN on 2 October 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N

EUROPÄISCHES KOMITEE FÜR NORMUN G

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4904:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 4904:2023
EN 4904:2022 (E)
Contents Page
European Foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9

2

---------------------- Page: 4 ----------------------
SIST EN 4904:2023
EN 4904:2022 (E)
European Foreword
This document (EN 4904:2022) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2023, and conflicting national standards shall be
withdrawn at the latest by June 2023 .
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identi
...