Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resistant steels for general purposes

This document specifies the technical delivery conditions for hot or cold rolled sheet/plate and strip of standard grades and special grades of corrosion resistant stainless steels for general purposes.
NOTE   General purposes include the use of stainless steels in contact with foodstuffs.
The general technical delivery conditions specified in EN 10021 apply in addition to the specifications of this document, unless otherwise specified in the document.
This document does not apply to components manufactured by further processing of the product forms listed above with quality characteristics altered as a result of such further processing.

Nichtrostende Stähle - Teil 2: Technische Lieferbedingungen für Blech und Band aus korrosionsbeständigen Stählen für allgemeine Verwendung

Dieses Dokument legt die technischen Lieferbedingungen für warm- oder kaltgewalztes Blech und Band aus Standardgüten und Sondergüten korrosionsbeständiger nichtrostender Stähle für allgemeine Verwendung fest.
ANMERKUNG Allgemeine Verwendung schließt diZusätzlich zu den Angaben dieser Europäischen Norm gelten, sofern in dieser Europäischen Norm nichts anderes festgelegt ist, die in EN 10021 festgelegten allgemeinen technischen Lieferbedingungen. e Verwendung von nichtrostenden Stählen in Berührung mit Lebensmitteln ein.
Diese Europäische Norm gilt nicht für die durch Weiterverarbeitung der oben genannten Erzeugnisformen hergestellten Teile mit fertigungsbedingt abweichenden Gütemerkmalen.

Aciers inoxydables - Partie 2: Conditions techniques de livraison des tôles et bandes en acier de résistance à la corrosion pour usage général

Le présent document spécifie les conditions techniques de livraison des tôles et bandes laminées à chaud ou à froid produites dans des nuances standardisées ou des nuances spéciales d'aciers inoxydables résistant à la corrosion pour usage général.
NOTE  L’usage général inclut l’utilisation des aciers inoxydables pour le contact alimentaire.
Les conditions techniques de livraison spécifiées dans l'EN 10021 s'appliquent en plus des spécifications du présent document, sauf en cas de spécification contraire dans le présent document.
Le présent document ne s'applique pas aux composants fabriqués par transformation ultérieure des produits énumérés ci-dessus, avec les modifications des caractéristiques de qualité qui en résultent.

Nerjavna jekla - 2. del: Tehnični dobavni pogoji za korozijsko odporne pločevine in trakove za splošno uporabo

General Information

Status
Not Published
Publication Date
29-Nov-2023
Current Stage
5060 - Closure of Vote - Formal Approval
Start Date
05-Oct-2023
Due Date
06-Dec-2022
Completion Date
05-Oct-2023

Relations

Buy Standard

Draft
prEN 10088-2:2022
English language
65 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 10088-2:2022
01-januar-2022
Nerjavna jekla - 2. del: Tehnični dobavni pogoji za korozijsko odporne pločevine in
trakove za splošno uporabo
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of
corrosion resisting steels for general purposes
Nichtrostende Stähle - Teil 2: Technische Lieferbedingungen für Blech und Band aus
korrosionsbeständigen Stählen für allgemeine Verwendung
Aciers inoxydables - Partie 2: Conditions techniques de livraison des tôles et bandes en
acier de résistance à la corrosion pour usage général
Ta slovenski standard je istoveten z: prEN 10088-2
ICS:
77.140.20 Visokokakovostna jekla Stainless steels
77.140.50 Ploščati jekleni izdelki in Flat steel products and semi-
polizdelki products
oSIST prEN 10088-2:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 10088-2:2022

---------------------- Page: 2 ----------------------
oSIST prEN 10088-2:2022


DRAFT
EUROPEAN STANDARD
prEN 10088-2
NORME EUROPÉENNE

EUROPÄISCHE NORM

November 2021
ICS 77.140.20; 77.140.50 Will supersede EN 10088-2:2014
English Version

Stainless steels - Part 2: Technical delivery conditions for
sheet/plate and strip of corrosion resisting steels for
general purposes
Aciers inoxydables - Partie 2: Conditions techniques de Nichtrostende Stähle - Teil 2: Technische
livraison des tôles et bandes en acier de résistance à la Lieferbedingungen für Blech und Band aus
corrosion pour usage général korrosionsbeständigen Stählen für allgemeine
Verwendung
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 459/SC 5.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 10088-2:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 10088-2:2022
prEN 10088-2:2021 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Designation and ordering . 7
4.1 Designation of steel grades . 7
4.2 Designation to be used on ordering . 7
5 Classification of grades . 8
6 Requ
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.