EN 10088-4:2009
(Main)Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
1.1 The scope of this part of EN 10088 is to specify the technical delivery conditions for hot or cold rolled sheet/plate and strip of standard and special grades of corrosion resisting stainless steels for construction purposes in addition to the general technical delivery conditions specified in EN 10021.
1.2 This European Standard does not apply to components manufactured by further processing of the product forms listed in 1.1 with quality characteristics altered as a result of such further processing.
Nichtrostende Stähle - Teil 4: Technische Lieferbedingungen für Blech und Band aus korrosionsbeständigen Stählen für das Bauwesen
Dieser Teil der EN 10088 enthält die technischen Lieferbedingungen für warm- oder kaltgewalztes Blech und
Band aus Standardgüten und Sondergüten korrosionsbeständiger nichtrostender Stähle für das Bauwesen in
Ergänzung zu den in EN 10021 festgelegten allgemeinen technischen Lieferbedingungen.
Diese Europäische Norm gilt nicht für die durch Weiterverarbeitung der oben genannten Erzeugnisformen
hergestellten Teile mit fertigungsbedingt abweichenden Gütemerkmalen.
Aciers inoxydables - Partie 4: Conditions techniques de livraison des tôles et bandes en acier résistant à la corrosion pour usage de construction
Le domaine d’application de la présente partie de l’EN 10088 vise à spécifier les conditions techniques de
livraison des tôles/bandes et feuillards laminés à chaud ou à froid, produits dans des nuances standardisées
et dans des nuances spéciales d’aciers inoxydables résistant à la corrosion pour usage de construction, en
plus des conditions générales techniques de livraison spécifiées dans l’EN 10021.
La présente Norme européenne ne s'applique pas aux composants fabriqués par transformation ultérieure
des produits énumérés en 1.1, avec les modifications des caractéristiques de qualité qui en résultent.
Nerjavna jekla - 4. del: Tehnični dobavni pogoji za tanko in debelo pločevino in trakove iz korozijsko odpornih konstrukcijskih jekel
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Nichtrostende Stähle - Teil 4: Technische Lieferbedingungen für Blech und Band aus korrosionsbeständigen Stählen für das BauwesenAciers inoxydables - Partie 4: Conditions techniques de livraison des tôles et bandes en acier de résistance a la corrosion pour usage de constructionStainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes77.140.50SROL]GHONLFlat steel products and semi-products77.140.20Visokokakovostna jeklaStainless steelsICS:Ta slovenski standard je istoveten z:EN 10088-4:2009SIST EN 10088-4:2009en,fr,de01-julij-2009SIST EN 10088-4:2009SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10088-4April 2009ICS 77.140.20; 77.140.50 English VersionStainless steels - Part 4: Technical delivery conditions forsheet/plate and strip of corrosion resisting steels for constructionpurposesAciers inoxydables - Partie 4: Conditions techniques delivraison des tôles et bandes en acier résistant à lacorrosion pour usage de constructionNichtrostende Stähle - Teil 4: TechnischeLieferbedingungen für Blech und Band auskorrosionsbeständigen Stählen für das BauwesenThis European Standard was approved by CEN on 21 February 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10088-4:2009: ESIST EN 10088-4:2009
Guidelines for further treatment (including heat treatment) in fabrication . 34 Annex B (normative)
Applicable dimensional standards . 38 Annex ZA (informative)
Relationship between this
European
Standard and the Essential Requirements
of EU Directive 89/106/EEC, EU Construction Products Directive . 39 Bibliography . 45
Part 1: List of stainless steels (including a table of European Standards, in which these stainless steels are further specified, see Annex D); Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes; Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes; Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes; Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes. The European Committee for Standardisation (CEN) draws attention to the fact that it is claimed that compliance with this document may involve the use of patents concerning two steel grades. The holder of these patent rights has assured the CEN that he/she is willing to negotiate licences under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the holder of this patent right is registered with CEN [and/or] CENELEC. Information may be obtained from: Sandvik AB SE-811 81 SANDVIKEN Sweden for grade 1.4477 Outokumpu Stainless AB SE-77480 AVESTA Sweden for grade 1.4162
CEN takes no position concerning the evidence, validity and scope of this patent right. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights other than those identified above. CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directive(s). SIST EN 10088-4:2009
3.4 types of heat-treatment the definitions in EN 10052:1993 apply
3.5 standard grades
grades with a relatively good availability and a wider range of application
3.6 special grades
grades for special use and/or with limited availability
4 Designation and ordering 4.1 Designation of steel grades The steel names and steel numbers (see Tables 1 to 4) are allocated in accordance with EN 10027-1 and EN 10027-2 respectively. 4.2 Order designation The complete designation
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.