Unbound and hydraulically bound mixtures - Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling

The standard specifies the method for the laboratory determination of the California bearing ratio (CBR) and immediate bearing index (IBI). The standard describes the principle of the tests, the apparatus required, the preparation of the test specimens, the curing of the specimens if required, the testing of the specimens, and the expression and reporting of the results. The preparation of the test specimens for CBR and IBI determination is by dynamic compaction using Proctor or modified Proctor compactive effort as specified in prEN 00227411.

Ungebundene und hydraulisch gebundene Gemische - Teil 47: Prüfverfahren zur Bestimmung des CBR-Wertes (California bearing ratio), des direkten Tragindex (IBI) und des linearen Schwellwertes

Diese Europäische Norm legt Laborprüfverfahren zur Bestimmung des Kalifornischen Tragfähigkeitswertes und des direkten Tragindex fest.
Die Prüfungen sind für den Teil des Gemisches geeignet, dessen maximale Korngröße 22,4 mm beträgt.
Für den Fall, dass Probekörper während des Aushärtens in Wasser eingelagert werden sollen, enthält diese Europäische Norm auch die vor der Bestimmung des Kalifornischen Tragfähigkeitswertes vorzunehmende Bestimmung der vertikalen Quellung der Probekörper.

Mélanges traités et mélanges non traités aux liants hydrauliques - Partie 47: Méthode d'essai pour la détermination de l'indice portant Californien (CBR), de l'indice de portance immédiate (IPI) et du gonflement

La présente Norme européenne spécifie une méthode de détermination en laboratoire de l'indice portant Californien et de l'indice de portance immédiate.
Les essais conviennent  aux parties de mélanges dont la dimension maximale des grains est de 22,4 mm.
Lorsqu'une conservation de l'éprouvette en immersion est requise, cette Norme européenne comprend également la détermination du gonflement vertical avant la détermination de l'indice portant Californien.

Nevezane in hidravlično vezane zmesi – 47. del: Preskusna metoda za ugotavljanje kalifornijskega indeksa nosilnosti (CBR), neposrednega indeksa nosilnosti (IBI) in linearnega nabrekanja

General Information

Status
Withdrawn
Publication Date
27-Jan-2004
Withdrawal Date
24-Apr-2012
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
25-Apr-2012
Completion Date
25-Apr-2012

Relations

Buy Standard

Standard
EN 13286-47:2004
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Ungebundene und hydraulisch gebundene Gemische - Teil 47: Prüfverfahren zur Bestimmung des CBR-Wertes (California bearing ratio), des direkten Tragindex (IBI) und des linearen SchwellwertesMélanges traités et mélanges non traités aux liants hydrauliques - Partie 47: Méthode d'essai pour la détermination de l'indice portant Californien (CBR), de l'indice de portance immédiate (IPI) et du gonflementUnbound and hydraulically bound mixtures - Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 13286-47:2004SIST EN 13286-47:2004en01-junij-2004SIST EN 13286-47:2004SLOVENSKI
STANDARD



SIST EN 13286-47:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13286-47January 2004ICS 93.080.20English versionUnbound and hydraulically bound mixtures - Part 47: Testmethod for the determination of California bearing ratio,immediate bearing index and linear swellingMélanges non traités et mélanges à la base de lianthydraulique - Partie 47: Méthodes d'essai pour ladétermination de l'indice portant Californien (CBR), del'indice portance immédiate (IPI) et du gonflementUngebundene und hydraulisch gebundene Gemische - Teil47: Prüfverfahren zur Bestimmung des CBR-Wertes(California bearing ratio), des direkten Tragindex (IBI) unddes linearen SchwellwertesThis European Standard was approved by CEN on 3 November 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13286-47:2004: ESIST EN 13286-47:2004



EN 13286-47:2004 (E)2ContentsPageForeword.31Scope.52Normative references.53Terms and definitions.54Principle.65Apparatus.65.1Apparatus for specimen manufacture.65.2Additional apparatus for soaking procedure and measurement of swelling.65.3Additional apparatus for determination of the California bearing ratio and immediatebearing index.66Test sample for the California bearing ratio and immediate bearing index tests.77Specimen manufacture for the California bearing ratio and immediate bearing index tests.78Curing for California bearing ratio test.78.1General.78.2Curing by prevention of evaporation.78.3Curing that permits full soaking.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.