iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

prEN ISO 16000-11

(Main)

Indoor air - Part 11: Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO/DIS 16000-11:2023)

Indoor air - Part 11: Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO/DIS 16000-11:2023)

Innenraumluftverunreinigungen - Teil 11: Bestimmung der Emission von flüchtigen organischen Verbindungen aus Bauprodukten und Einrichtungsgegenständen - Probenahme, Lagerung der Proben und Vorbereitung der Prüfstücke (ISO/DIS 16000-11:2023)

Emissionsuntersuchungen von flüchtigen organischen Verbindungen aus ungenutzten Bauprodukten oder Einrichtungsgegenständen in Prüfkammern oder Prüfzellen setzen eine sorgfältige Behandlung der Prüfstücke vor und während der Prüfung voraus.
In diesem Dokument werden drei Typen von Bauprodukten oder Einrichtungsgegenständen definiert: feste, flüssige und kombinierte. Für jeden Produkttyp werden Angaben zu den Probenahmeverfahren, den Transportbedingungen, der Lagerung und den eingesetzten Trägermaterialien, die die Emissionen der flüchtigen organischen Verbindungen beeinflussen können, gemacht. Für einzelne Produkte wird die Vorbereitung des Prüfstücks für jeden Produkttyp beschrieben.
ANMERKUNG   In Abhängigkeit von der Inhomogenität des Produktes können Messungen an verschiedenen Prüfstücken notwendig sein, um die spezifische Emissionsrate zu bestimmen.

Air intérieur - Partie 11: Dosage de l'émission de composés organiques volatils de produits de construction et d'objets d'équipement - Échantillonnage, conservation des échantillons et préparation d'échantillons pour essai (ISO/DIS 16000-11:2023)

Notranji zrak - 11. del: Določevanje emisije hlapnih organskih spojin iz gradbenih proizvodov in opreme - Vzorčenje, shranjevanje vzorcev in priprava preskusnih vzorcev (ISO/DIS 16000-11:2023)

General Information

Status
Not Published
Publication Date
20-Oct-2024
ICS
13.040.99 - Other standards related to air quality
Technical Committee
CEN/TC 264 - Air quality
Drafting Committee
CEN/TC 264 - Air quality
Current Stage
4599 - Dispatch of FV draft to CMC - Finalization for Vote
Start Date
12-Oct-2023
Completion Date
12-Oct-2023
Ref Project
oSIST prEN ISO 16000-11:2023 - Indoor air - Part 11: Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO/DIS 16000-11:2023)

Relations

Revises
EN ISO 16000-11:2006 - Indoor air - Part 11: Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO 16000-11:2006)
Effective Date
18-Jan-2023

Buy Standard

prEN ISO 16000-11:2023prEN ISO 16000-11:2023
PreviousNext
Draft
prEN ISO 16000-11:2023
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 16000-11:2023
01-maj-2023
Notranji zrak - 11. del: Določevanje emisije hlapnih organskih spojin iz gradbenih
proizvodov in opreme - Vzorčenje, shranjevanje vzorcev in priprava preskusnih
vzorcev (ISO/DIS 16000-11:2023)
Indoor air - Part 11: Determination of the emission of volatile organic compounds from
building products and furnishing - Sampling, storage of samples and preparation of test
specimens (ISO/DIS 16000-11:2023)
Innenraumluftverunreinigungen - Teil 11: Bestimmung der Emission von flüchtigen
organischen Verbindungen aus Bauprodukten und Einrichtungsgegenständen -
Probenahme, Lagerung der Proben und Vorbereitung der Prüfstücke (ISO/DIS 16000-
11:2023)
Air intérieur - Partie 11: Dosage de l'émission de composés organiques volatils de
produits de construction et d'objets d'équipement - Échantillonnage, conservation des
échantillons et préparation d'échantillons pour essai (ISO/DIS 16000-11:2023)
Ta slovenski standard je istoveten z: prEN ISO 16000-11
ICS:
13.040.20 Kakovost okoljskega zraka Ambient atmospheres
oSIST prEN ISO 16000-11:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 16000-11:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO 16000-11:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 16000-11
ISO/TC 146/SC 6 Secretariat: DIN
Voting begins on: Voting terminates on:
2023-03-22 2023-06-14
Indoor air —
Part 11:
Determination of the emission of volatile organic
compounds from building products and furnishing —
Sampling, storage of samples and preparation of test
specimens
ICS: 13.040.20
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 16000-11:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO 16000-11:2023
ISO/DIS 16000-11:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 16000-11
ISO/TC 146/SC 6 Secretariat: DIN
Voting begins on: Voting terminates on:

Indoor air —
Part 11:
Determination of the emission of volatile organic
compounds from building products and furnishing —
Sampling, storage of samples and preparation of test
specimens
ICS: 13.040.20
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 16000-11:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 4 ----------------------
oSIST prEN ISO 16000-11:2023
ISO/DIS 16000-11:2023(E)
Contents Page
Foreword .iv
Introduction .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 15267-2:2023(Main)
Air quality - Assessment of air quality monitoring equipment - Part 2: Initial assessment of the manufacturer’s quality management system and post certification surveillance for the manufacturing process
SIST EN 15267-2:2023

This document specifies the requirements for the manufacturer’s quality management system (QMS), the initial assessment of the manufacturer’s production control and the continuing surveillance of the effect of subsequent changes on the performance of certified air quality monitoring equipment (AQME).
This document also serves as a reference document for auditing the manufacturer’s QMS.
This document elaborates and supplements the requirements of EN ISO 9001:2015.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15267-1:2023(Main)
Air quality - Assessment of air quality monitoring equipment - Part 1: General principles of certification
SIST EN 15267-1:2023

This document specifies the general principles of certification, including common procedures and requirements, for the certification of air quality monitoring equipment (AQME).
This document applies to the certification of AQME for ambient air quality and emissions from stationary sources for which performance criteria and test procedures are available in European Standards.
This document provides for the certification of AQME according to the requirements of EN ISO/IEC 17065:2012.
This document elaborates and supplements the requirements of EN ISO/IEC 17065:2012 for bodies certifying AQME. It specifies requirements on testing laboratories as well as the manufacturer’s quality management system (QMS) and the surveillance for the manufacturing process as part of the certification process.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13725:2022(Main)
Stationary source emissions - Determination of odour concentration by dynamic olfactometry and odour emission rate
SIST EN 13725:2022

This document specifies a method for the objective determination of the odour concentration of a gaseous sample using dynamic olfactometry with human assessors. The standard also specifies a method for the determination of the emission rate of odours from stationary sources, in particular:
-   point sources (conveyed or ducted emissions);
-   active area sources (e.g. biofilters);
-   passive sources.
The primary application of this standard is to provide a common basis for evaluation of odour emissions.
When this document is used for the determination of the odour concentration or the odour emission rate of stationary source emissions, the other relevant European Standards concerning stationary source emissions apply, in particular EN 15259 and EN 16911-1, especially when measurements have to be in compliance with the relevant European Directives concerning industrial air emissions.
Even so, the analysis/quantification step of the measurement method described in this document (i.e. the determination of the odour concentration of an odorous gas sample, without respect to the origin of the sample itself) can be fully applied in many cases not related with industrial emission sources (e.g. the measurement of the mass concentration at the detection threshold of pure odorous substances, the determination of effectiveness of deodorizing systems for indoor air). In those latter cases, the requirements in this document concerning the measurement planning and the sampling of stationary sources  can be ignored or adapted.
This document is applicable to the measurement of odour concentration of pure substances, defined odorant compounds and undefined mixtures of odorant volatiles in air or nitrogen, using dynamic olfactometry with a panel of human assessors being the sensor. The unit of measurement is the European odour unit per cubic metre: ouE/m3. The odour concentration is measured by determining the dilution factor required to reach the detection threshold. The odour concentration at the detection threshold is by definition 1 ouE/m3. The odour concentration is then expressed in terms of multiples of the detection threshold. The range of measurement is typically from 101 ouE/m3 to 107 ouE/m3 (including pre dilution).
The field of application of this document includes:
-   the measurement of the mass concentration at the detection threshold of pure odorous substances in g/m3;
-   the determination of the EROM value of odorants, in mol;
-   the measurement of the odour concentration of mixtures of odorants in ouE/m3;
-   the measurement of the emission rate of odorous emissions from point sources, active area sources and passive area sources, including pre dilution during sampling;
-   the sampling of odorous gases from emissions of high humidity and temperature (up to 200 °C);
-   the determination of effectiveness of end-of-pipe mitigation techniques used to reduce odour emissions.
The determination of odour emissions requires measurement of gas velocityto determine the gas volume flow rate.
The field of application of this document does not include:
-   the measurement of odours potentially released by particles of odorous solids or droplets of odorous fluids suspended in emissions;
-   the measuring strategy to be applied in case of variable emission rates;
-   the measurement of the relationship between odour stimulus and assessor response above detection threshold (perceived intensity);
-   measurement of hedonic tone (or (un)pleasantness) or assessment of annoyance potential;
-   direct measurement of odour exposure in ambient air. For this measurement purpose, field panel methods exist which are the subject of CEN standard EN 16841-1, Ambient Air - Determination of odour in ambient air by using field inspection - Grid method;
-   direct olfactometry, including field olfactometry;
-   static olfactometry;
-   measurement of odour recognition thresholds;
-   measurement of odour identification thresholds.
.....

  • Standard
    124 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    124 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17198:2018(Main)
Stationary source emissions - Predictive Emission Monitoring Systems (PEMS) - Applicability, execution and quality assurance
SIST-TS CEN/TS 17198:2018

This Technical Specification gives requirements for the certification of PEMS software and for the performance and quality assurance for a PEMS to prove suitability for its measuring task and to ensure that the PEMS continues to perform within the specified performance during operation of the PEMS.

  • Technical specification
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15267-4:2017(Main)
Air quality - Certification of automated measuring systems - Part 4: Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources
SIST EN 15267-4:2017

This European Standard specifies the general performance criteria and test procedures for automated measuring systems used for discontinuous (periodic) measurements of stationary source emissions. It applies to the performance testing of automated measuring systems based on measurement techniques specified by a standard reference method (SRM) or an alternative method (AM). Performance testing is based on the general performance criteria and test procedures specified in this European Standard and on the specifications in the standard  specifying the SRM or AM. This includes testing of the applicability and correct implementation of the QA/QC procedures specified in the method-specific standard. This European Standard supports the requirements of particular EU Directives.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 15267-4(Main)
Air quality - Certification of automated measuring systems - Part 4: Performance criteria and test procedures for automated measuring systems for monitoring ambient air quality
oSIST prEN 15267-4

This document specifies the general performance criteria and test procedures for the performance test of portable automated measuring systems (P-AMS) used for periodic measurements of stationary source emissions. It applies to the performance test of P-AMS based on measurement techniques specified by the standard reference method (SRM) or an alternative method (AM).
The performance test is based on the general performance criteria and test procedures specified in this document and on the specific requirements specified for the SRM or AM. This includes testing of the applicability and correct implementation of the QA/QC procedures specified for the SRM or AM.
This document supports the requirements of particular EU Directives.

  • Draft
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
FprEN 15267-3(Main)
Air quality - Assessment of air quality monitoring equipment - Part 3: Performance criteria and test procedures for stationary automated measuring systems for continuous monitoring of emissions from stationary sources
kSIST FprEN 15267-3:2023

This document specifies the performance criteria and test procedures for the performance test of stationary automated measuring systems (AMS) that continuously measure gases and particulate matter in, and flow of, the waste gas from stationary sources.
This document supports the requirements of particular EU Directives. It provides the detailed procedures covering the QAL1 requirements of EN 14181 and, where required, input data used in QAL3.

  • Draft
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
FprEN 15267-4(Main)
Air quality - Assessment of air quality monitoring equipment - Part 4: Performance criteria and test procedures for portable automated measuring systems for periodic measurements of emissions from stationary sources
kSIST FprEN 15267-4:2023

This document specifies the general performance criteria and test procedures for the performance test of portable automated measuring systems (P-AMS) used for periodic measurements of stationary source emissions. It applies to the performance test of P-AMS based on measurement techniques specified by the standard reference method (SRM) or an alternative method (AM).
The performance test is based on the general performance criteria and test procedures specified in this document and on the specific requirements specified for the SRM or AM. This includes testing of the applicability and correct implementation of the QA/QC procedures specified for the SRM or AM.
This document supports the requirements of particular EU Directives.

  • Draft
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 15267-2(Main)
Air quality - Certification of automated measuring systems - Part 2: Minimum requirements for product quality assurance, initial assessment and on-going surveillance
oSIST prEN 15267-2

This document specifies the requirements for the manufacturer’s quality management system (QMS), the initial assessment of the manufacturer’s production control and the continuing surveillance of the effect of subsequent changes on the performance of certified air quality monitoring equipment (AQME).
This document also serves as a reference document for auditing the manufacturer’s QMS.
This document elaborates and supplements the requirements of EN ISO 9001:2015.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 15267-1(Main)
Air quality - Certification of automated measuring systems - Part 1: General aspects
oSIST prEN 15267-1

This document specifies the general principles of certification, including common procedures and requirements, for the certification of air quality monitoring equipment (AQME).
This document applies to the certification of AQME for ambient air quality and emissions from stationary sources for which performance criteria and test procedures are available in European Standards.
This document provides for the certification of AQME according to the requirements of EN ISO/IEC 17065:2012.
This document elaborates and supplements the requirements of EN ISO/IEC 17065:2012 for bodies certifying AQME. It specifies requirements on testing laboratories as well as the manufacturer’s quality management system (QMS) and the surveillance for the manufacturing process as part of the certification process.

  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day