EN ISO 13567-2:2002

Technical product documentation - Organization and naming of layers for CAD - Part 2: Concepts, format and codes used in construction documentation (ISO 13567-2:1998)

Technische Produktdokumentation - Gliederung und Benennung von Layern für CAD - Teil 2: Ordnungsmerkmale, Aufbau und Kennungen für die Dokumentation im Bauwesen (ISO 13567-2:1998)

Dieser Teil von ISO 13567 legt die Gliederung und Zuordnung von Layern in CAD für die Verständigung und Verwaltung in Projekten des Bauwesens fest.

Documentation technique de produits - Organisation et dénomination des couches de CAO - Partie 2: Concepts, format et codes utilisés dans la documentation pour la construction (ISO 13567-2:1998)

La présente partie de l'ISO 13567 couvre l'organisation et l'attribution des couches de CAO dans les projets de construction pour les besoins de communication et de gestion.

Tehnična dokumentacija izdelkov - Organizacija in poimenovanje plasti pri računalniškem projektiranju (CAD) - 2. del: Pojmi, format in šifre, uporabljene v gradbeni dokumentaciji (ISO 13567-2:1998)

General Information

• Status: Withdrawn
• Publication Date: 22-Jan-2002
• Withdrawal Date: 14-Nov-2017
• ICS: 01.110 - Technical product documentation
• ICS: 35.240.10 - Computer-aided design (CAD)
• Technical Committee: CEN/SS F01 - Technical drawings
• Drafting Committee: CEN/SS F01 - Technical drawings
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 15-Nov-2017
• Ref Project: SIST EN ISO 13567-2:2003 - Technical product documentation - Organization and naming of layers for CAD - Part 2: Concepts, format and codes used in construction documentation (ISO 13567-2:1998)

Relations

• Replaced By: EN ISO 13567-2:2017 - Technical product documentation - Organization and naming of layers for CAD - Part 2: Concepts, format and codes used in construction documentation (ISO 13567-2:2017)
• Effective Date: 02-Dec-2015

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Technische Produktdokumentation - Gliederung und Benennung von Layern für CAD - Teil 2: Ordnungsmerkmale, Aufbau und Kennungen für die Dokumentation im Bauwesen (ISO 13567-2:1998)Documentation technique de produits - Organisation et dénomination des couches de CAO - Partie 2: Concepts, format et codes utilisés dans la documentation pour la construction (ISO 13567-2:1998)Technical product documentation - Organization and naming of layers for CAD - Part 2: Concepts, format and codes used in construction documentation (ISO 13567-2:1998)35.240.10Computer-aided design (CAD)01.110L]GHONHTechnical product documentationICS:Ta slovenski standard je istoveten z:EN ISO 13567-2:2002SIST EN ISO 13567-2:2003en01-april-2003SIST EN ISO 13567-2:2003SLOVENSKI
STANDARD



SIST EN ISO 13567-2:2003



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 13567-2January 2002ICS 01.110; 35.240.10English versionTechnical product documentation - Organization and naming oflayers for CAD - Part 2: Concepts, format and codes used inconstruction documentation (ISO 13567-2:1998)Documentation technique de produits - Organisation etdénomination des couches de CAO - Partie 2: Concepts,format et codes utilisés dans la documentation pour laconstruction (ISO 13567-2:1998)Technische Produktdokumentation - Gliederung undBenennung von Layern für CAD - Teil 2:Ordnungsmerkmale, Aufbau und Kennungen für dieDokumentation im Bauwesen (ISO 13567-2:1998)This European Standard was approved by CEN on 27 December 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 13567-2:2002 ESIST EN ISO 13567-2:2003



EN ISO 13567-2:2002 (E)2CORRECTED
2002-03-27ForewordThe text of the International Standard from Technical Committee ISO/TC 10 "Technicaldrawings, product definition and related documentation" of the International Organization forStandardization (ISO) has been taken over as a European Standard by CMC.This European Standard shall be given the status of a national standard, either by publication ofan identical text or by endorsement, at the latest by July 2002, and conflicting national standardsshall be withdrawn at the latest by July 2002.According to the CEN/CENELEC Internal Regulations, the national standards organizations ofthe following countries are bound to implement this European Standard: Austria, Belgium, CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.Endorsement noticeThe text of the International Standard ISO 13567-2:1998 has been approved by CEN as aEuropean Standard without any modifications.NOTE
Normative references to International Standards are listed in annex ZA (normative).SIST EN ISO 13567-2:2003



EN ISO 13567-2:2002 (E)3Annex ZA(normative)Normative references to international publicationswith their relevant European publicationsThis European Standard incorporates by dated or undated reference, provisions from otherpublications. These normative references are cited at the appropriate places in the text and thepublications are listed hereafter. For dated references, subsequent amendments to or revisions ofany of these publications apply to this European Standard only when incorporated in it byamendment or revision. For undated references the latest edition of the publication referred toapplies (including amendments).NOTE Where an International Publication has been modified by common modifications, indicatedby (mod.), the relevant EN/HD applies.PublicationYearTitleENYearISO 4157-11998Construction drawings -Designation systems - Part 1:Buildings and parts of buildingsEN ISO 4157-11998ISO 4157-21998Construction drawings -Designation systems - Part 2:Room names and numbersEN ISO 4157-21998ISO 4157-31998Const
...