EN 16245-1:2013

Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 1: General requirements

This European Standard specifies the minimum general information to be declared for materials to be used for manufacturing fibre-reinforced plastic composites products.
This document includes requirements for the Certificate of Analysis (CoA). The purpose of the CoA is to verify that material properties and quality conform to the declared values.
This part of the standard is applicable to resins, curing systems, additives and modifiers, fibres, fabrics and core materials. The current version of the standard includes the following:
-               the thermoset resins polyesters and vinyl esters;
-   glass and carbon fibres;
-   knitted/stitched fabrics;
-   foam core and balsa core.

Faserverstärkte Verbundwerkstoffe - Angabe von Werkstoffeigenschaften - Teil 1: Allgemeine Anforderungen

Diese Europäische Norm legt die allgemeinen Mindestangaben für Werkstoffe fest, die zur Herstellung von Produkten aus faserverstärkten Kunststoffverbundwerkstoffen verwendet werden.
Dieses Dokument enthält Anforderungen an das Analysenzertifikat (CoA). Zweck des CoA ist es zu verifizieren, dass die Werkstoffeigenschaften und die Qualität den angegebenen Werten entsprechen.
Dieser Teil der Norm gilt für Harze, Aushärtungssysteme, Zusatzstoffe und Modifizierer sowie für Fasern, Gewebe und Kernwerkstoffe. Die aktuelle Fassung der Norm enthält Folgendes:
-   duroplastische Polyesterharze und Vinylesterharze;
-   Glas- und Kohlenstofffasern;
-   Gestricke/Nähgewirke;
-   Schaumkern- und Balsaholz Kernwerkstoffe.

Composites plastiques renforcés de fibres - Déclaration des caractéristiques des matières premières - Partie 1: Exigences générales

La présente Norme Européenne spécifie les informations générales minimales devant être déclarées pour les matériaux destinés à être utilisés pour la fabrication de produits en composites plastiques renforcés de fibres.
Le présent document contient les exigences relatives au certificat d'analyse (CA). Le CA a pour but de confirmer que les propriétés et la qualité des matériaux sont conformes aux valeurs déclarées.
La présente partie de la norme est applicable aux résines, aux systèmes de polymérisation, aux additifs et modificateurs, aux fibres, aux tissus et aux matériaux d’âme. La version actuelle de la norme inclut les éléments suivants :
-   les polyesters et esters vinyliques de résines thermodurcies ;
-   les fibres de verre et de carbone ;
-   les tissus tricotés/cousus ;
-   les âmes de mousse et de balsa.

Z vlakni ojačeni kompozitni polimerni materiali - Navajanje karakteristik surovin - 1. del: Splošne zahteve

Ta evropski standard določa minimalne splošne informacije, ki morajo biti navedene za materiale, ki se uporabljajo za izdelavo izdelkov iz z vlakni ojačenih kompozitnih polimernih materialov. Ta dokument vključuje zahteve za potrdilo o analizi (CoA). Namen potrdila o analizi je overitev, da so lastnosti materialov in kakovost skladni z deklariranimi vrednostmi. Ta del standarda se uporablja za smole, sisteme strjevanja, dodatke in modifikatorje, vlakna, tkanine ter osrednje materiale. Trenutna različica standarda vključuje naslednje: – termoaktivne smole poliestrov in vinil estrov; – steklena in karbonska vlakna; – pletene/šivane tkanine; – osrednja pena in balsa.

General Information

• Status: Published
• Publication Date: 16-Apr-2013
• Withdrawal Date: 30-Oct-2013
• ICS: 83.120 - Reinforced plastics
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249/WG 15 - Fibre-reinforced composites
• Current Stage: 9020 - Submission to 2 Year Review Enquiry - Review Enquiry
• Start Date: 15-Apr-2024
• Completion Date: 15-Apr-2024
• Ref Project: SIST EN 16245-1:2013 - Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 1: General requirements

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Faserverstärkte Verbundwerkstoffe - Angabe von Werkstoffeigenschaften - Teil 1: Allgemeine AnforderungenComposites plastiques renforcés de fibres - Déclaration des caractéristiques des matières premières - Partie 1: Exigences généralesFibre-reinforced plastic composites - Declaration of raw material characteristics - Part 1: General requirements83.120Reinforced plasticsICS:Ta slovenski standard je istoveten z:EN 16245-1:2013SIST EN 16245-1:2013en,fr,de01-julij-2013SIST EN 16245-1:2013SLOVENSKI
STANDARD



SIST EN 16245-1:2013



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16245-1
April 2013 ICS 83.120 English Version
Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 1: General requirements
Composites plastiques renforcés de fibres - Déclaration des caractéristiques des matières premières - Partie 1: Exigences générales
Faserverstärkte Verbundwerkstoffe - Angabe von Werkstoffeigenschaften - Teil 1: Allgemeine AnforderungenThis European Standard was approved by CEN on 1 March 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16245-1:2013: ESIST EN 16245-1:2013



EN 16245-1:2013 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .4 4 Content of a declaration .5 5 General information to be declared .6 5.1 General declaration .6 5.2 Documentation available at delivery.7 5.3 Labelling .7 6 Certificate of Analysis (CoA) .7 Bibliography .9
SIST EN 16245-1:2013



EN 16245-1:2013 (E) 3 Foreword This document (EN 16245-1:2013) has been prepared by Technical Committee CEN/TC 249 “Plastics”, the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2013, and conflicting national standards shall be withdrawn at the latest by October 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. EN 16245 consists of the following parts, under the general title Fibre-reinforced plas
...