EN 2114:2019

Aerospace series - Aluminium 1050A-H14 - Wire for solid rivets - D ≤ 10 mm

This document specifies the requirements relating to:
Aluminium 1050A-H14
Wire for solid rivets
D ≤ 10 mm
for aerospace applications.

Luft- und Raumfahrt - Aluminium 1050A-H14 - Draht für Vollniete - D ≤ 10 mm

Série aérospatiale - Aluminium 1050A-H14 - Fils pour rivets pleins - D ≤ 10 mm

Aeronavtika - Aluminij 1050A-H14 - Žica za polne kovice - D ≤ 10 mm

Ta dokument določa zahteve, ki se nanašajo na:
aluminij 1050A-H14,
žice za trde kovice,
D ≤ 10 mm,
za uporabo v aeronavtiki.

General Information

• Status: Published
• Publication Date: 28-May-2019
• Withdrawal Date: 29-Nov-2019
• ICS: 49.025.20 - Aluminium
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 29-May-2019
• Completion Date: 29-May-2019
• Ref Project: SIST EN 2114:2019 - Aerospace series - Aluminium 1050A-H14 - Wire for solid rivets - D ≤ 10 mm

Overview

EN 2114:2019 is a European Standard developed by CEN that specifies the requirements for aluminium 1050A-H14 wire intended for solid rivets with diameters up to 10 mm, specifically for aerospace applications. This standard ensures consistency and quality for wire used in critical aerospace manufacturing processes, focusing on material properties, mechanical strength, and dimensional tolerances. It forms part of the comprehensive aerospace series of metallic material standards developed under the Aerospace and Defence Industries Association of Europe (ASD-STAN).

Key Topics

• Material Specification: Aluminium 1050A-H14, known for excellent corrosion resistance and good electrical conductivity, is detailed with precise chemical composition limits. Key elements such as silicon, iron, copper, manganese, magnesium, zinc, titanium, and aluminium are regulated to guarantee performance.
• Physical Characteristics: Wire is produced through drawing, with a defined maximum diameter of 10 mm for use as solid rivets.
• Mechanical Requirements: Minimum tensile strength (Rm) of 100 MPa and shear strength of at least 60 MPa are stipulated alongside other mechanical properties relevant to aerospace manufacturing.
• Heat Treatment and Delivery Conditions: The H14 temper designation indicates strain hardening, enhancing the wire’s mechanical properties. Delivery conditions and heat treatment specifications align with aerospace material quality requirements.
• Testing and Inspection: Requirements for marking, dimensional inspection, and testing ensure compliance with the standard. Test conditions are maintained at ambient temperature.
• Normative References: EN 2114:2019 frequently references other aerospace material standards like EN 2070 (technical specifications for aluminium alloys), EN 2615 and EN 2616 (wire dimensions and tolerances), and EN 4258 (series organization), providing a cohesive framework for material standardization.

Applications

• Aerospace Manufacturing: EN 2114:2019 aluminium 1050A-H14 wire is primarily used in the production of solid rivets that are critical in aircraft assembly and structural components where reliability and precision are mandatory.
• Structural Riveting: The standard ensures that rivets meet stringent aerospace requirements for strength and durability in fuselage, wings, and various aerospace structures.
• Replacement and Repair: Provides a standardized material option for maintenance, repair, and overhaul (MRO) operations within the aerospace sector, promoting compatibility and safety.
• Quality Assurance Programs: Facilitates procurement and quality control processes by defining clear qualification guidelines agreed upon between manufacturers and purchasers.

Related Standards

• EN 2070-1 and EN 2070-6: Cover general and specific technical specifications for aluminium and aluminium alloys used in aerospace wrought products including rivet wire.
• EN 2615 and EN 2616: Define dimensional and tolerance standards for aluminium wire, ensuring exact sizing critical to rivet performance.
• EN 4258: Describes the general organization and linkage across the series of aerospace metallic material standards.
• EN 4500-2: Establishes drafting and presentation rules for standards covering aluminium, aluminium alloys, and magnesium alloys, supporting clarity and uniformity in documentation.

---

EN 2114:2019 serves as a vital reference for aerospace engineers, manufacturers, and quality assurance professionals involved in the design, production, and inspection of aluminium wire used for solid rivets. Adherence to this standard enables improved safety, performance, and interoperability in aerospace assembly and repair operations.

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2019
Aeronavtika - Aluminij 1050A-H14 - Žica za polne kovice - D ≤ 10 mm
Aerospace series - Aluminium 1050A-H14 - Wire for solid rivets - D ≤ 10 mm
Luft- und Raumfahrt - Aluminium 1050A-H14 - Nietdrähte für Vollniete - D ≤ 10 mm
Série aérospatiale - Aluminium 1050A-H14 - Fils pour rivets pleins - D ≤ 10 mm
Ta slovenski standard je istoveten z: EN 2114:2019
ICS:
49.025.20 Aluminij Aluminium
77.150.10 Aluminijski izdelki Aluminium products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 2114
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2019
EUROPÄISCHE NORM
ICS 49.025.20
English Version
Aerospace series - Aluminium 1050A-H14 - Wire for solid
rivets - D ≤ 10 mm
Série aérospatiale - Aluminium 1050A-H14 - Fils pour Luft- und Raumfahrt - Aluminium 1050A-H14 -
rivets pleins - D ≤ 10 mm Nietdrähte für Vollniete - D ≤ 10 mm
This European Standard was approved by CEN on 28 August 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2114:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5

European foreword
This document (EN 2114:2019) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2019, and conflicting national standards shall
be withdrawn at the latest by November 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
...