EN ISO 11553-2:2008
(Main)Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007)
Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007)
ISO 11553-2:2007 specifies the requirements for laser processing devices, as defined in ISO 11553-1, which are hand-held or hand-operated.
The purpose of ISO 11553-2:2007 is to draw attention to the particular hazards related to the use of hand-held laser and hand-operated laser processing devices and to prevent personal injury. This includes both the areas of hazard analysis and risk assessment as well as protective measures.
Sicherheit von Maschinen - Laserbearbeitungsmaschinen - Teil 2: Sicherheitsanforderungen an handgeführte Laserbearbeitungsgeräte (ISO 11553-2:2007)
Dieser Teil der ISO 11553 gilt für Anforderungen an die in ISO 11553-1 definierten Laserbearbeitungsgeräte,
die von Hand geführt oder positioniert werden.
Der Zweck dieses Teiles der ISO 11553 besteht darin, die Aufmerksamkeit auf die besonderen Gefährdungen
zu richten, die mit der Anwendung von handgeführten und handpositionierten Laserbearbeitungsgeräten
verbunden sind und Verletzungen von Personen zu verhindern. Dazu werden sowohl die Bereiche der
Gefährdungsanalyse als auch der Risikobewertung sowie Schutzmaßnahmen erfasst.
Anforderungen mit Bezug auf Lärm als Gefährdung werden in diesem Teil der ISO 11553 nicht erfasst. Diese
Anforderungen müssen in einer Änderung zu einem späteren Zeitpunkt berücksichtigt werden.
Dieser Teil der ISO 11553 ist nicht auf Laserprodukte oder Einrichtungen anwendbar, die nur oder
ausdrücklich für Anwendungen hergestellt werden, die außerhalb des Anwendungsbereichs der ISO 11553-1
liegen.
Sécurité des machines - Machines à laser - Partie 2: Exigences de sécurité pour dispositifs de traitement laser portatifs (ISO 11553-2:2007)
L'ISO 11553-2:2007 spécifie les exigences applicables aux dispositifs de traitement laser, tels que définis dans l'ISO 11553-1, qui sont portatifs ou actionnés manuellement.
L'objectif de l'ISO 11553-2:2007 est d'attirer l'attention sur les phénomènes dangereux particuliers associés à l'utilisation de dispositifs de traitement laser portatifs et de prévenir les blessures aux personnes. Cela inclut les domaines de l'analyse des phénomènes dangereux et l'évaluation du risque ainsi que les mesures de protection.
Varnost strojev - Laserski obdelovalni stroji - 2. del: Varnostne zahteve za ročne laserske obdelovalne naprave (ISO 11553-2:2007)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sicherheit von Maschinen - Laserbearbeitungsmaschinen - Teil 2: Sicherheitsanforderungen an handgeführte Laserbearbeitungsgeräte (ISO 11553-2:2007)Sécurité des machines - Machines à laser - Partie 2: Exigences de sécurité pour dispositifs de traitement laser portatifs (ISO 11553-2:2007)Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007)31.260Optoelektronika, laserska opremaOptoelectronics. Laser equipment13.110Varnost strojevSafety of machineryICS:Ta slovenski standard je istoveten z:EN ISO 11553-2:2008SIST EN ISO 11553-2:2009en01-marec-2009SIST EN ISO 11553-2:2009SLOVENSKI
STANDARDSIST EN ISO 11553-2:20071DGRPHãþD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 11553-2November 2008ICS 13.110; 31.260Supersedes EN ISO 11553-2:2007
English VersionSafety of machinery - Laser processing machines - Part 2:Safety requirements for hand-held laser processing devices(ISO 11553-2:2007)Sécurité des machines - Machines à laser - Partie 2:Exigences de sécurité pour dispositifs de traitement laserportatifs (ISO 11553-2:2007)Sicherheit von Maschinen - Laserbearbeitungsmaschinen -Teil 2: Sicherheitsanforderungen an handgeführteLaserbearbeitungsgeräte (ISO 11553-2:2007)This European Standard was approved by CEN on 7 November 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 11553-2:2008: ESIST EN ISO 11553-2:2009
Clauses of this European Standard addressing essential requirements or other provisions of EU directives 98/37/EC.4 Annex ZB (informative)
Relationship between this
European
Standard and the Essential Requirements of EU Directive 2006/42/EC.5
Clauses of this European Standard addressing essential requirements or other provisions of EU directives 98/37/EC
This European standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association and supports essential requirement 1.5.12 of the following EU Directives: Machinery safety Directive 98/37/EC.
Once this standard is cited in the Official Journal of the European Communities under that Directive and has been implemented as a national standard in at least one Member State, compliance with the normative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the corresponding Essential Requirements of that Directive and associated EFTA regulations. WARNING: Other requirements and other EU Directives may be applicable to the products falling within the scope of this International standard.
Relationship between this
European
Standard and the Essential Requirements of EU Directive 2006/42/EC This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide a means of conforming to Essential Requirements of the New Approach Directive 2006/42/EC on machinery. Once this standard is cited in the Official Journal of the European Communities under that Directive and has been implemented as a national standard in at least one Member State, compliance with the normative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements of that Directive, except for 1.7.3 2nd indent and 1.4.2.1 2nd paragraph, and associated EFTA regulations. WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard.
Reference numberISO 11553-2:2007(E)© ISO 2007
INTERNATIONAL STANDARD ISO11553-2First edition2007-03-01Corrected version2008-03-01Safety of machinery — Laser processing machines — Part 2: Safety requirements for hand-held laser processing devices Sécurité des machines — Machines à laser —
Partie 2: Exigences de sécurité pour dispositifs de traitement laser portatifs
ISO 11553-2:2007(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
©
ISO 2007 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.org Web
www.iso.org Published in Switzerland
ii © ISO 2007 – All rights reserved
ISO 11553-2:2007(E) © ISO 2007 – All rights reserved iiiContents Page Foreword.iv Introduction.v 1 Scope.1 2 Normative references.1 3 Terms and definitions.2 4 Hazards.2 4.1 Inherent hazards.2 4.2 Hazards induced by external effects (interferences).3 4.3 Further hazards related to the use of hand-held laser processing devices.4 5 Safety requirements and measures.4 5.1 General requirements.4 5.2 Risk assessment.5 5.3 Implementation of corrective measures.5 5.4 Design requirements.7 6 Verification of safety requirements and measures.11 6.1 General conformance.11 6.2 Control category classification.11 6.3 Laser classification.12 7 Information for the user.12 7.1 Additional requirements.12 7.2 Recommended inclusions.13 8 Labelling.14 Annex A (informative)
Risk assessment examples.15 Annex B (informative)
Types of hand-held laser processing machines.17 Bibliography.19
ISO 11553-2:2007(E) iv © ISO 2007 – All rights reserved Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 11553-2 was prepared by Technical Committee ISO/TC 172, Optics and photonics, Subcommittee SC 9, Electro-optical systems. This first edition, together with ISO 11553-1, cancels and replaces ISO 11553:1996, which has been technically revised. ISO 11553 consists of the following parts, under the general title Safety of machinery — Laser processing machines: ⎯ Part 1: General safety requirements ⎯ Part 2: Safety requirements for hand-held laser processing devices This corrected version of ISO 11553-2:2007 now carries the logo of the International Electrotechnical Commission (IEC) as well as that of ISO. SIST EN ISO 11553-2:2009
ISO 11553-2:2007(E) © ISO 2007 – All rights reserved vIntroduction This document is a type C standard as stated in ISO 12100-1:2003. The machinery
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.