prEN ISO 11553-2

Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO/DIS 11553-2:2016)

2018-11-13: WI abandoned due to cancellation of equivalent ISO WI (ISO notification to dataservice on 2018-11-12).

Sicherheit von Maschinen - Laserbearbeitungsmaschinen - Teil 2: Sicherheitsanforderungen an handgeführte Laserbearbeitungsgeräte (ISO/DIS 11553-2:2016)

Sécurité des machines - Machines à laser - Partie 2: Exigences de sécurité pour dispositifs de traitement laser portatifs (ISO/DIS 11553-2:2016)

Varnost strojev - Laserski obdelovalni stroji - 2. del: Varnostne zahteve za ročne laserske obdelovalne naprave (ISO/DIS 11553-2:2016)

General Information

• Status: Not Published
• Publication Date: 02-Jul-2018
• Withdrawal Date: 02-Jan-2019
• ICS: 13.110 - Safety of machinery
• ICS: 31.260 - Optoelectronics. Laser equipment
• Technical Committee: CEN/TC 123 - Lasers and photonics
• Drafting Committee: CEN/TC 123 - Lasers and photonics
• Current Stage: 4098 - Decision to abandon - Enquiry
• Completion Date: 12-Nov-2018
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: oSIST prEN ISO 11553-2:2017 - Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO/DIS 11553-2:2016)

Relations

• Revises: EN ISO 11553-2:2008 - Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007)
• Effective Date: 22-Oct-2014

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2017
9DUQRVWVWURMHY/DVHUVNLREGHORYDOQLVWURMLGHO9DUQRVWQH]DKWHYH]DURþQH
ODVHUVNHREGHORYDOQHQDSUDYH,62',6
Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-
held laser processing devices (ISO/DIS 11553-2:2016)
Sicherheit von Maschinen - Laserbearbeitungsmaschinen - Teil 2:
Sicherheitsanforderungen an handgeführte Laserbearbeitungsgeräte (ISO/DIS 11553-
2:2016)
Sécurité des machines - Machines à laser - Partie 2: Exigences de sécurité pour
dispositifs de traitement laser portatifs (ISO/DIS 11553-2:2016)
Ta slovenski standard je istoveten z: prEN ISO 11553-2
ICS:
13.110 Varnost strojev Safety of machinery
31.260 Optoelektronika, laserska Optoelectronics. Laser
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT INTERNATIONAL STANDARD
ISO DIS 11553-2
ISO/TC 172/SC 9 Secretariat: DIN
Voting begins on: Voting terminates on:
2016-12-06 2017-02-27
Safety of machinery — Laser processing machines —
Part 2:
Safety requirements for hand-held laser processing devices
Sécurité des machines — Machines à laser —
Partie 2: Exigences de sécurité pour dispositifs de traitement laser portatifs
ICS: 13.110; 31.260
Member bodies are requested to consult relevant national interests in IEC/TC
76 before casting their ballot to the e-Balloting application.
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO DIS 11553-2:2016(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2016

ISO DIS 11553-2:2016(E)
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2016 – All rights reserved

ISO DIS 11553-2:2016(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Hazards . 2
4.1 Inherent hazards . 2
4.2 Hazards induced by external effects (interferences) . 3
4.3 Further hazards related to the use of hand-held laser processing devices . 3
4.3.1 Confined spaces . 3
4.3.2 Working at heights . 4
4.3.3 Environmental effects . 4
5 Safety requirements and measures . 4
5.1 General requirements . 4
5.2 Risk assessment . 5
5.3 Implementation of corrective measures . 5
5.3.1 General requirements . 5
5.3.2 Protection against laser radiation hazards . 5
5.4 Design requirements . 6
5.4.1 Design . 6
5.4.2 Protective enclosure . 7
5.4.3 Authorizing control device . 7
5.4.4 Emission warning device . 7
5.4.5 Alignment laser . 7
5.4.6 Safety devices for scanning laser radiation . 7
5.4.7 Emergency stop control . 7
5.4.8 Control means and circuits . 8
5.4.9 Provisions for isolation of the laser beam .10
5.4.10 Protection against hazards generated by materials and substances .11
6 Verification of safety requirements and measures .11
6.1 General conformance.11
6.2 Classification of safety related control circuit .12
6.3 Laser classification .12
7 Information for use .12
7.1 Additional required information .12
7.2 Further information that should be included.13
8 Labelling .14
Annex A (informative) Risk assessment examples .15
Annex B (informative) Types of hand-held laser processing machines .17
Annex C (informative) Examples for the design of technical safety measures for hand-held
laser processing devices .19
Annex D (informative) Recommendations for the selection of personal protective clothing
for use with HLD .22
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC aimed to be covered .25
Bibliography .26
ISO DIS 11553-2:2016(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment,
as well as information about ISO’s adherence to the World Trade Organization (WTO) principles in the
Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.
ISO 11553-2 was prepared by Technical Committee ISO/TC 172, Optics and photonics, Subcommittee
SC 9, Electro-optical systems in collaboration with IEC/TC 76, Optical radiation safety and laser equipment.
This Draft International Standard 11553-2 is a revision of ISO 11553-2:2007 and includes the following
changes:
— The document has been technically revised.
— Annex C “Examples for the design of technical safety measures for hand-held laser processing
devices “ and Annex D “Recommendations for the selection of personal protective clothing for use
with HLD “ were added.
— An Annex ZA was added.
ISO 11553 consists of the following parts, under the general title Safety of machinery — Laser processing
machines:
— Part 1: General safety requirements
— Part 2: Safety requirements for hand-held laser processing devices
— Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held
processing devices and associated auxiliary equipment (accuracy grade 2)
iv © ISO 2016 – All rights reserved

ISO DIS 11553-2:2016(E)
Introduction
This document is a type C standard as stated in ISO 12100:2010.
The machinery concerned and the extent to which hazards, hazardous situations and events are covered
are indicated in the scope of this document. When provisions of this type C standard are different from
those which are stated in type A or B
...