CEN ISO/TR 20173:2009

Welding - Grouping systems for materials - American materials (ISO/TR 20173:2009)

ISO/TR 20173:2009 provides an American grouping system for materials for welding purposes, classified in accordance with the grouping system of ISO/TR 15608:2005.
It may also apply for other purposes, such as heat treatment, forming, and non-destructive testing. Types of steels are listed in accordance with the grouping system of ISO/TR 15608:2005, Table 1.
ISO/TR 20173:2009 covers grouping systems for the following standardized materials: steel; aluminium and its alloys; nickel and its alloys; copper and its alloys; titanium and its alloys; zirconium and its alloys; and cast irons.

Schweißen - Werkstoffgruppeneinteilung - Amerikanische Werkstoffe (ISO/TR 20173:2009)

Soudage - Systèmes de groupement des matériaux - Matériaux américains (ISO/TR 20173:2009)

L'ISO/TR 20173:2009 fournit un système de groupement américain des matériaux destinés au soudage, classés conformément au système de groupement de l'ISO/TR 15608:2005.
Il peut également s'appliquer pour d'autres fins, tels le traitement thermique, le formage et les contrôles non destructifs. Les types d'acier sont listés conformément au système de groupement de l'ISO/TR 15608:2005, Tableau 1.
L'ISO/TR 20173:2009 couvre les systèmes de groupement des matériaux normalisés suivants: aciers; aluminium et alliages d'aluminium; nickel et alliages de nickel; cuivre et alliages de cuivre; titane et alliages de titane; zirconium et alliages de zirconium; fontes.

Varjenje - Razvrščanje ameriških materialov v skupine (ISO/TR 20173:2009)

To tehnično poročilo zagotavlja ameriško razvrščanje materialov za varjenje v skupine v skladu z razvrščanjem v skupine ISO/TR 15608:2005[1]. Lahko velja tudi v druge namene, kot so toplotna obdelava, oblikovanje in neporušitveno preskušanje. Vrste jekla so navedene v skladu z razvrščanjem v skupine ISO/TR 15608:2005[1], preglednica 1. To tehnično poročilo zajema razvrščanje v skupine naslednjih standardiziranih materialov: - jekla; - aluminija in njegovih zlitin; - niklja in njegovih zlitin; - bakra in njegovih zlitin; - titana in njegovih zlitin; - cirkonija in njegovih zlitin; - železnih litin.

General Information

• Status: Withdrawn
• Publication Date: 30-Sep-2009
• Withdrawal Date: 21-Aug-2018
• ICS: 25.160.20 - Welding consumables
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/SC 4 - Quality management in the field of welding
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 22-Aug-2018
• Ref Project: SIST-TP CEN ISO/TR 20173:2010 - Welding - Grouping systems for materials - American materials (ISO/TR 20173:2009)

Relations

• Replaces: CEN ISO/TR 20173:2005 - Welding - Grouping systems for materials - American materials (ISO/TR 20173:2005)
• Effective Date: 10-Oct-2009
• Replaced By: CEN ISO/TR 20173:2018 - Welding - Grouping systems for materials - American materials (ISO 20173:2018)
• Effective Date: 08-Jun-2015

Standards Content (Sample)

SLOVENSKI STANDARD
01-april-2010
1DGRPHãþD
SIST-TP CEN ISO/TR 20173:2006
9DUMHQMH5D]YUãþDQMHDPHULãNLKPDWHULDORYYVNXSLQH,6275
Welding - Grouping systems for materials - American materials (ISO/TR 20173:2009)
Schweißen - Werkstoffgruppeneinteilung - Amerikanische Werkstoffe (ISO/TR
20173:2009)
Soudage - Systèmes de groupement des matériaux - Matériaux américains (ISO/TR
20173:2009)
Ta slovenski standard je istoveten z: CEN ISO/TR 20173:2009
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

TECHNICAL REPORT
CEN ISO/TR 20173
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
October 2009
ICS 25.160.20 Supersedes CEN ISO/TR 20173:2005
English Version
Welding - Grouping systems for materials - American materials
(ISO/TR 20173:2009)
Soudage - Systèmes de groupement des matériaux - Schweißen - Werkstoffgruppeneinteilung - Amerikanische
Matériaux américains (ISO/TR 20173:2009) Werkstoffe (ISO/TR 20173:2009)

This Technical Report was approved by CEN on 15 September 2009. It has been drawn up by the Technical Committee CEN/TC 121.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TR 20173:2009: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
This document (CEN ISO/TR 20173:2009) has been prepared by Technical Committee ISO/TC 44 "Welding
and allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding” the secretariat of
which is held by DIN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN ISO/TR 20173:2005.
Endorsement notice
The text of ISO/TR 20173:2009 has been approved by CEN as a CEN ISO/TR 20173:2009 without any
modification.
TECHNICAL ISO/TR
REPORT 20173
Second edition
2009-10-01
Welding — Grouping systems for
materials — American materials
Soudage — Systèmes de groupement des matériaux — Matériaux
américains
Reference number
ISO/TR 20173:2009(E)
©
ISO 2009
ISO/TR 20173:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2009 – All rights reserved

ISO/TR 20173:2009(E)
Contents Page
Foreword. iv
1 Scope . 1
2 American grouping system for materials. 1
Bibliography . 58

ISO/TR 20173:2009(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
In exceptional circumstances, when a technical committee has collected data of a different kind from that
which is normally published as an International Standard (“state of the art”, for example), it may decide by a
simple majority vote of its participating members to publish a Technical Report. A Technical Report is entirely
informative in nature and does not have to be reviewed until the data it provides are considered to be no
longer valid or useful.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO/TR 20173 was prepared by Technical Committee ISO/TC 44, Welding and allied processes,
Subcommittee SC 10, Unification of requirements in the field of metal welding.
This second edition cancels and replaces the first edition (ISO/TR 20173:2005), which has been technically
revised.
Requests for official interpretations of any aspect of this Technical Report should be directed to the Secretariat
of ISO/TC 44/SC 10 via your national standards body. A complete listing of these bodies can be found at
http://www.iso.org.
iv © ISO 2009 – All rights reserved

TECHNICAL REPORT ISO/TR 20173:2009(E)

Welding — Grouping systems for materials — American
materials
1 Scope
This Technical Report provides an American grouping system for materials for welding purposes, classified in
[1]
accordance with the grouping system of ISO/TR 15608:2005 .
It may also apply for other purposes, such as heat treatment, forming, and non-destructive testing. Types of
[1]
steels are listed in accordance with the grouping system of ISO/TR 15608:2005 , Table 1.
This Technical Report covers grouping systems for the following standardized materials:
⎯ steel;
⎯ aluminium and its alloys;
⎯ nickel and its alloys;
⎯ copper and its alloys;
⎯ titanium and its alloys;
⎯ zirconium and its alloys;
⎯ cast irons.
2 American grouping system for materials
See Tables 1 and 2.
Table 1 — American grouping system for ferrous material
ASTM/ASME ASME/AWS
ISO/TR
UNS
[1]
Type or grade 15608:2005 Nominal composition
P or M Group
No.
Specification No. group
No. No.
AS 15 5-490 — 1 — 1.1 C
AS 15 7-430 — 1 — 1.1 C
AS 15 7-460 — 1 — 1.1 C
AS 15 7-490 — 1 — 1.1 C
A/SA 36 — K02600 1 1 11.1 C-Mn-Si
A/SA 36 — K02600 1 1 11.1 C-Mn-Si
A/SA 53 Type E, Gr. A K02504 1 1 11.1 C
ISO/TR 20173:2009(E)
Table 1 (continued)
ASTM/ASME ASME/AWS
ISO/TR
UNS
[1]
Type or grade 15608:2005 Nominal composition
No. P or M Group
Specification No.
group
No. No.
A/SA 53 Type E, Gr. B K03005 1 1 11.1 C-Mn
A/SA 53 Type F — 1 1 11.1 C
A/SA 53 Type S, Gr. A K02504 1 1 11.1 C
A/SA 53 Type S, Gr. B K03005 1 1 11.1 C-Mn
A/SA 105 — K03504 1 2 11.1 C
A/SA 106 A K02501 1 1 1.1 C-Si
A/SA 106 B K03006 1 1 11.1 C-Mn-Si
A/SA 106 C K03501 1 2 11.1 C-Mn-Si
A 108 1015 CW G10150 1 1 1.1 C
A 108 1018 CW G10180 1 1 1.1 C
A 108 1020 CW G10200 1 1 1.1 C
A 108 8620 CW G86200 3 3 4.1 0.5Ni-0.5Cr-Mo
A 131 A — 1 1 1.1 C
A 131 AH32 — 1 2 1.2 C-Mn-Si
A 131 AH36 — 1 2 1.2 C-Mn-Si
A 131 B — 1 1 1.1 C-Mn-Si
A 131 CS — 1 1 1.1 C-Mn-Si
A 131 D — 1 1 1.1 C-Mn-Si
A 131 DH32 — 1 2 1.2 C-Mn-Si
A 131 DH36 — 1 2 1.2 C-Mn-Si
A 131 DS — 1 1 1.1 C-Mn-Si
A 131 E — 1 2 1.1 C-Mn-Si
A 131 EH32 — 1 2 1.2 C-Mn-Si
A 131 EH36 — 1 2 1.2 C-Mn-Si
A/SA 134 SA283, Gr. A — 1 1 1.1 C
A/SA 134 SA283, Gr. B — 1 1 1.1 C
A/SA 134 SA283, Gr. C K02401 1 1 1.1 C
A/SA 134 SA283, Gr. D K02702 1 1 1.1 C
A/SA 134 SA285, Gr. A K01700 1 1 1.1 C
A/SA 134 SA285, Gr. B K02200 1 1 1.1 C
A/SA 134 SA285, Gr. C K02801 1 1 11.1 C
A/SA 135 A — 1 1 1.1 C
A/SA 135 B — 1 1 11.1 C
A 139 A — 1 1 1.1 C
A 139 B K03003 1 1 1.1 C
2 © ISO 2009 – All rights reserved

ISO/TR 20173:2009(E)
Table 1 (continued)
ASTM/ASME ASME/AWS
ISO/TR
UNS
[1]
Type or grade 15608:2005 Nominal composition
No. P or M Group
Specification No.
group
No. No.
A 139 C K03004 1 1 11.1 C
A 139 D K03010 1 1 11.1 C
A 139 E K03012 1 1 11.1 C
A 167 Type 302B S30215 8 1 8.1 18Cr-8Ni-2Si
A 167 Type 308 S30800 8 2 8.2 20Cr-10Ni
A 167 Type 309 S30900 8 2 8.2 23Cr-12Ni
A 167 Type 309S S30908 8 2 8.2 23Cr-12Ni
A 167 Type 310 S31000 8 2 8.2 25Cr-20Ni
A 167 Type 310S S31008 8 2 8.2 25Cr-20Ni
A/SA 178 A K01200 1 1 1.1 C
A/SA 178 C K03503 1 1 11.1 C
A/SA 178 D — 1 2 11.1 C-Mn-Si
A/SA 179 — K01200 1 1 1.1 C
A/SA 181 Cl. 60 K03502 1 1 11.1 C-Si
A/SA 181 Cl. 70 K03502 1 2 11.1 C-Si
A 182 F60 S32205 10H 1 10.1 22Cr-5Ni-3Mo-N
A 182 F6a, Cl. 3 S41000 6 3 7.2 13Cr
A 182 F6a, Cl. 4 S41000 6 3 7.2 13Cr
A 182 S34565 S34565 8 4 8.2 24Cr-17Ni-6Mn-4.5Mo-N
A/SA 182 F1 K12822 3 2 1.1 C-0.5Mo
A/SA 182 F10 S33100 8 2 8.1 20Ni-8Cr
A/SA 182 F11, Cl. 1 K11597 4 1 5.1 1.25Cr-0.5Mo-Si
A/SA 182 F11, Cl. 2 K11572 4 1 5.1 1.25Cr-0.5Mo-Si
A/SA 182 F11, Cl. 3 K11572 4 1 5.1 1.25Cr-0.5Mo-Si
A/SA 182 F12, Cl. 1 K11562 4 1 5.1 1Cr-0.5Mo
A/SA 182 F12, Cl. 2 K11564 4 1 5.1 1Cr-0.5Mo
A/SA 182 F2 K12122 3 2 4.2 0.5Cr-0.5Mo
A/SA 182 F21 K31545 5° 1 5.2 3Cr-1Mo
A/SA 182 F22, Cl. 1 K21590 5° 1 5.2 2.25Cr-1Mo
A/SA 182 F22, Cl. 3 K21590 5° 1 5.2 2.25Cr-1Mo
A/SA 182 F22V K31835 5C 1 6.2 2.25Cr-1Mo-V
A/SA 182 F304 S30400 8 1 8.1 18Cr-8Ni
A/SA 182 F304H S30409 8 1 8.1 18Cr-8Ni
A/SA 182 F304L S30403 8 1 8.1 18Cr-8Ni
A/SA 182 F304LN S30453 8 1 8.1 18Cr-8Ni-N
ISO/TR 20173:2009(E)
Table 1 (continued)
ASTM/ASME ASME/AWS
ISO/TR
UNS
[1]
Type or grade Nominal composition
15608:2005
No. P or M Group
Specification No.
group
No. No.
A/SA 182 F304N S30451 8 1 8.1 18Cr-8Ni-N
A/SA 182 F310 S31000 8 2 8.2 25Cr-20Ni
A/SA 182 F310MoLN S31050 8 2 8.2 25Cr-22Ni-2Mo-N
A/SA 182 F316 S31600 8 1 8.1 16Cr-12Ni-2Mo
A/SA 182 F316H S31609 8 1 8.1 16Cr-12Ni-2Mo
A/SA 182 F316L S31603 8 1 8.1 16Cr-12Ni-2Mo
A/SA 182 F316LN S31653 8 1 8.1 16Cr-12Ni-2Mo-N
A/SA 182 F316N S31651 8 1 8.1 16Cr-12Ni-2Mo-N
A/SA 182 F317 S31700 8 1 8.1 18Cr-13Ni-3Mo
A/SA 182 F317L S31703 8 1 8.1 18Cr-13Ni-3Mo
A/SA 182 F321 S32100 8 1 8.1 18Cr-10Ni-Ti
A/SA 182 F321H S32109 8 1 8.1 18Cr-10Ni-Ti
A/SA 182 F347 S34700 8 1 8.1 18Cr-10Ni-Cb
A/SA 182 F347H S34709 8 1 8.1 18Cr-10Ni-Cb
A/SA 182 F348 S34800 8 1 8.1 18Cr-10Ni-Cb
A/SA 182 F348H S34809 8 1 8.1 18Cr-10Ni-Cb
A/SA 182 F3V K31830 5C 1 6.2 3Cr-1Mo-V-Ti-B
A/SA 182 F3VCb — 5C 1 6.2 3Cr-1Mo-0.25V-Cb-Ca
A/SA 182 F429 S42900 6 2 7.2 15Cr
A/SA 182 F430 S43000 7 2 7.1 17Cr
A/SA 182 F44 S31254 8 4 8.2 20Cr-18Ni-6Mo
A/SA 182 F45 S30815 8 2 8.2 21Cr-11Ni-N
A/SA 182 F46 S30600 8 1 8.1 18Cr-15Ni-4Si
A/SA 182 F5 K41545 5B 1 5.3 5Cr-0.5Mo
A/SA 182 F50 S31200 10H 1 10.2 25Cr-6Ni-Mo-N
A/SA 182 F51 S31803 10H 1 10.1 22Cr-5Ni-3Mo-N
A/SA 182 F53 S32750 10H 1 10.2 25Cr-7Ni-4Mo-N
A/SA 182 F54 S39274 10H 1 10.2 25Cr-7Ni-3Mo-2W-Cu-N
A/SA 182 F55 S32760 10H 1 10.1 25Cr-8Ni-3Mo-W-Cu-N
A/SA 182 F5a K42544 5B 1 5.3 5Cr-0.5Mo
A/SA 182 F6a, Cl. 1 S41000 6 1 7.2 13Cr
A/SA 182 F6a, Cl. 2 S41000 6 3 7.2 13Cr
A/SA 182 F6b S41026 6 3 7.2 13Cr-0.5Mo
A/SA 182 F6NM S41500 6 4 7.2 13Cr-4.5Ni-Mo
4 © ISO 2009 – All rights reserved

ISO/TR 20173:2009(E)
Table 1 (continued)
ASTM/ASME ASME/AWS
ISO/TR
UNS
[1]
Type or grade Nominal composition
15608:2005
No. P or M Group
Specification No.
group
No. No.
A/SA 182 F9
...