EN ISO 4628-6:2001
(Main)Paints and varnishes - Evaluation of degradation of paint coatings - Designation of intensity, quantity and size of common types of defect - Part 6: Rating of degree of chalking by tape method (ISO 4628-6:1990)
Paints and varnishes - Evaluation of degradation of paint coatings - Designation of intensity, quantity and size of common types of defect - Part 6: Rating of degree of chalking by tape method (ISO 4628-6:1990)
This part of ISO 4628 provides pictorial reference standards for designating thedegree of chalking of paint coatings. It also describes a method by which the degree of chalking is rated. In using this method, it is essential that care is taken to distinguish between true degradation products and adhering dirt, particularly when chalking is slight.
Beschichtungsstoffe - Beurteilung von Beschichtungsschäden - Bewertung von Ausmaß, Menge und Größe von Schäden - Teil 6: Bewertung des Kreidungsgrades nach dem Klebebandverfahren (ISO 4628-6:1990)
Dieser Teil der Norm ISO 4628 enthält Bilder und ein Verfahren, nach denen der Kreidungsgrad von Beschichtungen bewertet werden kann. Bei diesem Verfahren ist es wichtig, zwischen Abbauprodukten der Beschichtung und anhaftendem Schmutz zu unterscheiden, besonders, wenn die Kreidung nur gering ist (siehe 6.4).
Peintures et vernis - Evaluation de la dégradation des surfaces peintes - Désignation de l'intensité, de la quantité et de la diménsion des types courants de défauts - Partie 6: Cotation du degré de farinage par la méthode du ruban adhésif (ISO 4628-6:1990)
Barve in laki - Vrednotenje propadanja premazov - Ocenjevanje intenzitete, količine in velikosti običajnih vrst poškodb - 6. del: Določanje stopnje kredanja po metodi z lepilnim trakom (ISO 4628-6:1990)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Paints and varnishes - Evaluation of degradation of paint coatings - Designation of intensity, quantity and size of common types of defect - Part 6: Rating of degree of chalking by tape method (ISO 4628-6:1990)HQ]LWHWHPeintures et vernis - Evaluation de la dégradation des surfaces peintes - Désignation de l'intensité, de la quantité et de la diménsion des types courants de défauts - Partie 6: Cotation du degré de farinage par la méthode du ruban adhésif (ISO 4628-6:1990)Beschichtungsstoffe - Beurteilung von Beschichtungsschäden - Bewertung von Ausmaß, Menge und Größe von Schäden - Teil 6: Bewertung des Kreidungsgrades nach dem Klebebandverfahren (ISO 4628-6:1990)Ta slovenski standard je istoveten z:EN ISO 4628-6:2001SIST EN ISO 4628-6:2002en87.040Barve in lakiPaints and varnishesICS:SLOVENSKI
STANDARDSIST EN ISO 4628-6:200201-september-2002
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 4628-6October 2001ICS 87.040English versionPaints and varnishes - Evaluation of degradation of paintcoatings - Designation of intensity, quantity and size of commontypes of defect - Part 6: Rating of degree of chalking by tapemethod (ISO 4628-6:1990)Peintures et vernis - Evaluation de la dégradation dessurfaces peintes - Désignation de l'intensité, de la quantitéet de la diménsion des types courants de défauts - Partie 6:Cotation du degré de farinage par la méthode du rubanadhésif (ISO 4628-6:1990)This European Standard was approved by CEN on 4 October 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 4628-6:2001 E
EN ISO 4628-6:2001 (E)2ForewordThe text of the International Standard from Technical Committee ISO/TC 35 "Paints and varnishes" ofthe International Organization for Standardization (ISO) has been taken over as an European Standardby Technical Committee CEN/TC 139 "Paints and varnishes", the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of anidentical text or by endorsement, at the latest by April 2002, and conflicting national standards shall bewithdrawn at the latest by April 2002.NOTE FROM CMC: The foreword is susceptible to be amended on reception of the German languageversion. The confirmed or amended foreword, and when appropriate, the normative annex ZA for thereferences to international publications with their relevant European publications will be circulated withthe German version.According to the CEN/CENELEC Internal Regulations, the national standards organizations of thefollowing countries are bound to implement this European Standard: Austria, Belgium, Czech Republic,Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands,Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.Endorsement noticeThe text of the International Standard ISO 4628-6:1990 has been approved by CEN as a EuropeanStandard without any modification.
INTERNATIONAL STANDARD ISO 4628-6 First edi tion 1990-12-15 Paints and varnishes - Evaluation of degradation of paint coatings - Designation of intensity, quantity and size of common types of defect - Part 6: Rating of degree of chalking by tape method Peinfures et vernis - haluation de la degradation des surfaces peintes - Designation de l’intensite, de la quantite et de la dimension des types courants de defauts - Partie 6: Cotation du degre de farinage par la methode du ruban adhesif Reference number ISO 4628-6: 199O(E)
ISO 462806:1990(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national Standards bodies (ISO member bodies). The work of preparing International Standards is nor’mally carried out through ISO technical committees. Esch member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, govern- mental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an Interna- tional Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard ISO 4628-6 was prepared by Technical Committee ISO/TC 35, Paints and varnishes. ISO 4628 consists of the foIlowing Parts, under the general title Paints and varnishes - Evaluation of degradation of paint coatings - Desig- nation of intensity, quantity and size of common types of defect: - Part 1: General principles and rating schemes - Part 2: Designation of degree of blistering - Part 3: Designation of degree of rusting - Part 4: Designation of degree of cracking - Part 5: Designation of degree of flaking - Part 6: Ratjng of degree of chalking by tape mefhod 8 ISO 1990 All rights reserved. No part of this publication may be r
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.