Aerospace series - Pipe coupling 8°30' up to 28 000 kPa - Adaptors - Metric series - Technical specification

This standard specifies the required characteristics, inspection and test methods, quality assurance and procurement requirements for metric series 8°30' adaptors, for temperature ranges type II and III according to ISO 6771 and nominal pressure up to 28 000 kPa.

Luft- und Raumfahrt - Rohrverschraubung 8°30' bis 28 000 kPa - Anschlussverschraubungen - Metrische Reihe - Technische Lieferbedingungen

Diese Norm legt die Anforderungen, Prüfungen und Prüfverfahren, Anforderungen an die Qualitätssicherung und Beschaffung für metrische Anschlussverschraubungen 8°30' für die Temperaturbereiche vom Typ II und III nach ISO 6771 und Nenndrücke bis 28 000 kPa fest.

Série aérospatiale - Système de raccordement 8°30' jusqu'à 28 000 kPa - Raccords à implanter - Série métrique - Spécification technique

Aeronavtika - Cevni priključek 8°30' do 28 000 kPa - Adapterji - Metrska serija - Tehnična specifikacija

General Information

Status
Published
Publication Date
18-Jul-2006
Withdrawal Date
30-Jan-2007
Technical Committee
Drafting Committee
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
31-May-2017

Buy Standard

Standard
EN 3079:2009
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Rohrverschraubung 8°30' bis 28 000 kPa - Anschlussverschraubungen - Metrische Reihe - Technische LieferbedingungenSérie aérospatiale - Système de raccordement 8°30' jusqu'à 28 000 kPa - Raccords à implanter - Série métrique - Spécification techniqueAerospace series - Pipe coupling 8°30' up to 28 000 kPa - Adaptors - Metric series - Technical specification49.080Aerospace fluid systems and componentsICS:Ta slovenski standard je istoveten z:EN 3079:2006SIST EN 3079:2009en,de01-junij-2009SIST EN 3079:2009SLOVENSKI
STANDARD



SIST EN 3079:2009



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3079
July 2006 ICS 49.080 English Version
Aerospace series - Pipe coupling 8°30' up to 28 000 kPa - Adaptors - Metric series - Technical specification
Série aérospatiale - Système de raccordement 8°30' jusqu'à 28 000 kPa - Raccords à implanter - Série métrique - Spécification technique
Luft- und Raumfahrt - Rohrverschraubung 8°30' bis 28 000 kPa - Anschlussverschraubungen - Metrische Reihe - Technische Lieferbedingungen This European Standard was approved by CEN on 13 January 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3079:2006: ESIST EN 3079:2009



EN 3079:2006 (E) 2
Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.5 4 Requirements, inspection and test methods.6 5 Quality assurance.16 6 Preparation for delivery.17 Annex A (normative)
Batch identification.21
SIST EN 3079:2009



EN 3079:2006 (E)
3 Foreword This European Standard (EN 3079:2006) has been prepared by the AeroSpace and Defense Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2007, and conflicting national standards shall be withdrawn at the latest by January 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, P
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.