EN 13087-4:2012

Protective helmets - Test methods - Part 4: Retention system effectiveness

This European Standard specifies methods of test for protective helmets. The purpose of these tests is to enable assessment of the performance of the helmet as specified in the appropriate helmet standard.
This European Standard specifies the method of test for retention system effectiveness.

Schutzhelme - Prüfverfahren - Teil 4: Wirksamkeit des Haltesystems

Diese Europäische Norm legt Prüfverfahren für Schutzhelme fest. Zweck dieser Prüfung ist, die Beurteilung der Gebrauchstauglichkeit des Helmes zu ermöglichen, wie es in der entsprechenden Norm für Helme festgelegt ist.
Diese Europäische Norm legt das Verfahren zur Prüfung der Wirksamkeit des Haltesystems fest.

Casques de protection - Méthodes d'essai - Partie 4: Efficacité du système de rétention

La présente Norme européenne décrit des méthodes d'essai pour les casques de protection. Ces essais sont
destinés à permettre l’évaluation de la performance du casque spécifiée dans la norme de casque appropriée.
La présente Norme européenne spécifie la méthode d'essai pour l’efficacité du système de rétention.

Varovalne čelade - Preskusne metode - 4. del: Učinkovitost zadrževalnega sistema

Ta evropski standard določa preskusne metode za varovalne čelade. Namen teh preskusov je omogočiti oceno lastnosti čelade, kot je določeno v ustreznem standardu za čelado. Ta evropski standard določa preskusne metode za učinkovitost zadrževalnega sistema.

General Information

• Status: Published
• Publication Date: 07-Feb-2012
• ICS: 13.340.20 - Head protective equipment
• Technical Committee: CEN/TC 158 - Head protection
• Drafting Committee: CEN/TC 158/WG 11 - Headforms and test methods
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 18-Dec-2023
• Directive: 2016/425 - Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC
• Directive: 89/686/EEC - Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
• Mandate: M/031 - Standardization mandate to CEN/CENELEC concerning standards for Personal Protective Equipment
• Ref Project: SIST EN 13087-4:2012 - Protective helmets - Test methods - Part 4: Retention system effectiveness

Relations

• Replaces: EN 13087-4:2000 - Protective helmets - Test methods - Part 4: Retention system effectiveness
• Effective Date: 15-Feb-2012

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Schutzhelme - Prüfverfahren - Teil 4: Wirksamkeit des HaltesystemsCasques de protection - Méthodes d'essai - Partie 4: Efficacité du système de rétentionProtective helmets - Test methods - Part 4: Retention system effectiveness13.340.20Varovalna oprema za glavoHead protective equipmentICS:Ta slovenski standard je istoveten z:EN 13087-4:2012SIST EN 13087-4:2012en,fr,de01-julij-2012SIST EN 13087-4:2012SLOVENSKI
STANDARDSIST EN 13087-4:20011DGRPHãþD



SIST EN 13087-4:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13087-4
February 2012 ICS 13.340.20 Supersedes EN 13087-4:2000English Version
Protective helmets - Test methods - Part 4: Retention system effectiveness
Casques de protection - Méthodes d'essai - Partie 4: Efficacité du système de rétention
Schutzhelme - Prüfverfahren - Teil 4: Wirksamkeit des Haltesystems This European Standard was approved by CEN on 17 December 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13087-4:2012: ESIST EN 13087-4:2012



EN 13087-4:2012 (E) 2 Contents Page Foreword .3Introduction .41Scope .52Normative references .53Terms and definitions .54Prerequisites .55Method .55.1General .55.2Principle .65.3Apparatus .65.3.1General .65.3.2Test headforms .65.3.3Rigid base .65.3.4Falling mass and guidance system .65.3.5Means to measure impact speed .65.4Procedure .75.5Report .
...