iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 10256-3:2024

(Main)

Protective equipment for use in ice hockey - Part 3: Face and eye protectors for skaters (ISO 10256-3:2024)

Protective equipment for use in ice hockey - Part 3: Face and eye protectors for skaters (ISO 10256-3:2024)

This document specifies performance requirements and test methods for eye and face protectors for use in ice hockey only.
This document is applicable to eye and face protectors worn by ice hockey players other than goalkeepers and by referees.

Schutzausrüstung zum Gebrauch beim Eishockey - Teil 3: Gesichtsschützer für Eisläufer (ISO 10256-3:2024)

Dieses Dokument legt Leistungsanforderungen und Prüfverfahren für Augen- und Gesichtsschützer zur ausschließlichen Verwendung beim Eishockey fest.
Dieses Dokument ist gültig für Augen- und Gesichtsschützer, die von Eishockeyspielern, mit Ausnahme von Torwarten, und von Schiedsrichtern getragen werden.

Équipements de protection destinés à être utilisés en hockey sur glace - Partie 3: Protections faciales et oculaires pour les patineurs (ISO 10256-3:2024)

Le présent document spécifie les exigences de performance et les méthodes d'essai applicables aux protections faciales et oculaires destinées à être utilisées exclusivement en hockey sur glace.
Le présent document s'applique aux protections faciales et oculaires portées par les joueurs de hockey sur glace autres que les gardiens de but, et par les arbitres.

Varovalna oprema za uporabo pri hokeju na ledu - 3. del: Ščitniki za obraz in oči za drsalce (ISO/FDIS 10256-3:2024)

General Information

Status
Not Published
Publication Date
10-Dec-2024
ICS
13.340.20 - Head protective equipment
97.220.20 - Winter sports equipment
Technical Committee
CEN/TC 158 - Head protection
Drafting Committee
CEN/TC 158 - Head protection
Current Stage
6055 - CEN Ratification completed (DOR) - Publishing
Start Date
14-Jul-2024
Completion Date
14-Jul-2024
Directive
2016/425 - Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC
Mandate
M/571 - COMMISSION IMPLEMENTING DECISION of 19.11.2020 on a standardisation request to the European Committee for Standardization and the European Committee for Electrotechnical Standardization as regards personal protective equipment in support of Regulation (EU) 2016/425 of the European Parliament and of the Council
Ref Project
kSIST FprEN ISO 10256-3:2024 - Protective equipment for use in ice hockey - Part 3: Face and eye protectors for skaters (ISO/FDIS 10256-3:2024)

Relations

Revises
EN ISO 10256-3:2018 - Protective equipment for use in ice hockey - Part 3: Face protectors for skaters (ISO 10256-3:2016)
Effective Date
23-Dec-2020

Buy Standard

prEN ISO 10256-3:2022 - BARVEprEN ISO 10256-3:2022 - BARVE
PreviousNext
Draft
prEN ISO 10256-3:2022 - BARVE
English language
33 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
oSIST prEN ISO 10256-3:2022
01-januar-2022
Varovalna oprema za uporabo pri hokeju na ledu - 3. del: Ščitniki za obraz in oči za
drsalce (ISO/DIS 10256-3:2021)
Protective equipment for use in ice hockey - Part 3: Face and eye protectors for skaters
(ISO/DIS 10256-3:2021)
Schutzausrüstung zum Gebrauch beim Eishockey - Teil 3: Gesichtsschützer für Eisläufer
(ISO/DIS 10256-3:2021)
Équipements de protection destinés à être utilisés en hockey sur glace - Partie 3:
Protections faciales et oculaires pour les patineurs (ISO/DIS 10256-3:2021)
Ta slovenski standard je istoveten z: prEN ISO 10256-3
ICS:
13.340.20 Varovalna oprema za glavo Head protective equipment
97.220.20 Oprema za zimske športe Winter sports equipment
oSIST prEN ISO 10256-3:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN ISO 10256-3:2022
oSIST prEN ISO 10256-3:2022
DRAFT INTERNATIONAL STANDARD
ISO/DIS 10256-3
ISO/TC 83/SC 5 Secretariat: SCC
Voting begins on: Voting terminates on:
2021-11-16 2022-02-08
Protective equipment for use in ice hockey —
Part 3:
Face and eye protectors for skaters
ICS: 13.340.20; 97.220.20
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 10256-3:2021(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2021

oSIST prEN ISO 10256-3:2022
ISO/DIS 10256-3:2021(E)
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
oSIST prEN ISO 10256-3:2022
ISO/DIS 10256-3:2021(E)
Contents Page
Foreword .v
European foreword . vi
Introduction .vii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Requirements . 4
4.1 Materials and construction . 4
4.1.1 General . 4
4.1.2 Types of face protectors . . 4
4.1.3 Mass restriction (Type B2 only) . 4
4.2 Design . 4
4.2.1 All types . 4
4.2.2 Types B1, B2. 4
4.2.3 Type C . 5
4.3 Protected area . 5
4.3.1 Type B1 and B2 — Face protectors . 5
4.3.2 Type C — Eye protectors . . 5
4.4 Penetration (test blade) . 5
4.5 Puck impact resistance . 6
4.5.1 Types B1, B2. 6
4.5.2 Type C . 6
4.6 Field of vision . 7
4.7 Optical quality . . 7
4.7.1 Visual inspection . 7
4.7.2 Luminous transmittance . 7
4.7.3 Haze . 7
4.7.4 Optical power requirements . 7
5 Test methods . 7
5.1 Tolerances . 7
5.2 Sampling . 8
5.2.1 Samples . 8
5.2.2 Quantity . 8
5.2.3 Face or eye protector/head protector combination. 8
5.3 Conditioning. 8
5.4 Determination of mass (for head protector/B2 face protector combinations fitting
EN 960 headform size 535 or smaller) . 8
5.5 Placing and adjusting head protectors . . 8
5.5.1 Head protector-positioning index (HPI) . 8
5.5.2 Placing and adjusting head protectors with face protectors (Type B1 and
B2) . 8
5.5.3 Placing and adjusting head protectors with eye protectors (Type C) . 9
5.6 Determination of design and protected area . 9
5.6.1 All types . 9
5.6.2 Type B1 and B2 . 9
5.6.3 Type C . 9
5.7 Determination of penetration . 9
5.7.1 Test apparatus . 9
5.7.2 Procedures . 9
5.8 Determination of puck impact resistance . 10
5.8.1 Test apparatus . 10
5.8.2 Procedures . 10
iii
oSIST prEN ISO 10256-3:2022
ISO/DIS 10256-3:2021(E)
5.9 Field of vision test method . 11
5.10 Determination of optical quality . 11
5.10.1 Visual inspection . 11
5.10.2 Luminous transmittance . 11
5.10.3 Haze . 11
5.10.4 Optical power . 11
6 Test report .12
7 Markings .12
8 Information for users .13
Annex A (normative) Puck specifications .24
ANNEX ZA (info
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 10256-2:2018(Main)
Protective equipment for use in ice hockey - Part 2: Head protection for skaters (ISO 10256-2:2016)
SIST EN ISO 10256-2:2018

ISO 10256-2:2016 specifies performance requirements and test methods for head protectors for use in ice hockey and is intended to be read in conjunction with ISO 10256‑1.
Requirements and the corresponding test methods, where appropriate, are given for the following:
a)    construction and protected area;
b)    shock absorption;
c)    penetration;
d)    retention system properties;
e)    field of vision;
f)     marking and information.
ISO 10256-2:2016 applies to head protectors worn by
-      players other than goalkeepers, and
-      certain functionaries (e.g. referees).
NOTE 1       The requirements of a Clause take precedent over a figure.
NOTE 2       The intent of this part of ISO 10256 is to reduce the risk of injury to the head without compromising the form or appeal of the game.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10256-4:2018(Main)
Protective equipment for use in ice hockey - Part 4: Head and face protection for goalkeepers (ISO 10256-4:2016)
SIST EN ISO 10256-4:2018

ISO 10256-4:2016 covers performance requirements for head and face protectors to be used by ice hockey goalkeepers. It is intended to be read in conjunction with ISO 10256‑1, ISO 10256‑2 and ISO 10256‑3.
Performance requirements are established, where appropriate for the following:
a)    materials, assembly, and design;
b)    protected areas (coverage) and penetration resistance;
c)    shock absorption;
d)    puck impact resistance;
e)    retention;
f)     optical quality.
NOTE 1       The requirements of a clause take precedent over a figure.
NOTE 2       The intent of this part of ISO 10256 is to reduce the risk of injury to the head and face of ice hockey goalkeepers without compromising the form and appeal of the game.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10256-3:2018(Main)
Protective equipment for use in ice hockey - Part 3: Face protectors for skaters (ISO 10256-3:2016)
SIST EN ISO 10256-3:2018

ISO 10256-3:2016 specifies performance requirements and test methods for face protectors (including visors) for use in ice hockey and is intended to be used in conjunction with ISO 10256‑1.
Requirements and the corresponding test methods, where appropriate, are given for the following:
a)    construction and area of coverage;
b)    resistance to puck impact;
c)    penetration;
d)    field of vision;
e)    geometric (visual) optics and acuity;
f)     transmittance and haze;
g)    marking and information.
ISO 10256-3:2016 applies to face protectors worn by
-      players other than goalkeepers, and
-      certain functionaries (e.g. referees).
NOTE 1       The requirements of a Clause take precedent over a figure.
NOTE 2       The intent is to reduce the risk of injury to the face without compromising the form or appeal of the game.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10256-1:2016(Main)
Protective equipment for use in ice hockey - Part 1: General requirements (ISO 10256-1:2016)
SIST EN ISO 10256-1:2017

ISO 10256-1:2016 is part of ISO 10256 specifies general requirements for head, face, neck and body protectors (hereafter referred to as protectors) for use in ice hockey.
ISO 10256-1:2016 is intended only for protectors used for ice hockey. Requirements are given for the following:
a)    terms and definitions;
b)    innocuousness;
c)    ergonomics;
d)    test report;
e)    permanent markings;
f)     information for users.
In the ISO 10256 series, collateral standards specify performance requirements for protectors for use in ice hockey and are intended to be read in conjunction with ISO 10256-1:2016.
NOTE 1       The requirements of a clause take precedence over a figure.
NOTE 2       The intent is to reduce the risk of injury to an ice hockey player without compromising the form or appeal of the game. These standards presume that the rules of play for ice hockey will be followed by players and enforced by officials.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10256-4:2024(Main)
Protective equipment for use in ice hockey - Part 4: Head and face protectors for goalkeepers (ISO 10256-4:2024)
kSIST FprEN ISO 10256-4:2024

This document specifies performance requirements and test methods for head and face protectors for use by ice hockey goalkeepers only.

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10256-1:2024(Main)
Protective equipment for use in ice hockey - Part 1: General requirements (ISO 10256-1:2024)
kSIST FprEN ISO 10256-1:2024

This document specifies general requirements and test methods for head, face, eye, neck, and body protectors (hereafter referred to as protectors) for use in ice hockey.
This document is intended only for protectors used for ice hockey.

  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10256-2:2024(Main)
Protective equipment for use in ice hockey - Part 2: Head protectors for skaters (ISO 10256-2:2024)
kSIST FprEN ISO 10256-2:2024

This document specifies performance requirements and test methods for head protectors for use in ice hockey.
This document is applicable to head protectors worn by ice hockey players excluding goalkeepers and by referees.

  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18527-1:2022(Main)
Eye and face protection for sports use - Part 1: Requirements for downhill skiing and snowboarding goggles (ISO 18527-1:2021)
SIST EN ISO 18527-1:2022

This document applies to all goggles with plano lenses, intended for eye protection against hazards including ultraviolet and visible solar radiation, rain, snow and wind, during downhill skiing, snowboarding and other similar activities.
This document applies to downhill skiing and snowboarding goggles fitted with an insert to carry prescription lenses.
It specifies requirements and testing for materials, performance, marking of goggles and information to be supplied by the manufacturer.
Information on the selection and use of downhill skiing and snowboarding goggles is given in Annex A.
This document does not apply to
a)   eye protectors for protection when operating or travelling on a motorized vehicle,
b)   eye protectors for protection against optical radiation from artificial sources, such as those used in solaria,
c)   eye protectors for direct observation of the sun, and
d)   eye protectors intended for sports with unrelated hazards and risks.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10256-4:2018(Main)
Protective equipment for use in ice hockey - Part 4: Head and face protection for goalkeepers (ISO 10256-4:2016)
SIST EN ISO 10256-4:2018

ISO 10256-4:2016 covers performance requirements for head and face protectors to be used by ice hockey goalkeepers. It is intended to be read in conjunction with ISO 10256‑1, ISO 10256‑2 and ISO 10256‑3.
Performance requirements are established, where appropriate for the following:
a)    materials, assembly, and design;
b)    protected areas (coverage) and penetration resistance;
c)    shock absorption;
d)    puck impact resistance;
e)    retention;
f)     optical quality.
NOTE 1       The requirements of a clause take precedent over a figure.
NOTE 2       The intent of this part of ISO 10256 is to reduce the risk of injury to the head and face of ice hockey goalkeepers without compromising the form and appeal of the game.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10256-3:2018(Main)
Protective equipment for use in ice hockey - Part 3: Face protectors for skaters (ISO 10256-3:2016)
SIST EN ISO 10256-3:2018

ISO 10256-3:2016 specifies performance requirements and test methods for face protectors (including visors) for use in ice hockey and is intended to be used in conjunction with ISO 10256‑1.
Requirements and the corresponding test methods, where appropriate, are given for the following:
a)    construction and area of coverage;
b)    resistance to puck impact;
c)    penetration;
d)    field of vision;
e)    geometric (visual) optics and acuity;
f)     transmittance and haze;
g)    marking and information.
ISO 10256-3:2016 applies to face protectors worn by
-      players other than goalkeepers, and
-      certain functionaries (e.g. referees).
NOTE 1       The requirements of a Clause take precedent over a figure.
NOTE 2       The intent is to reduce the risk of injury to the face without compromising the form or appeal of the game.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day