Conformity assessment - Supplier's declaration of conformity - Part 1: General requirements (ISO/IEC 17050-1:2004, corrected version 2007-06-15)

ISO/IEC 17050-1:2004 specifies general requirements for a supplier's declaration of conformity in cases where it is desirable, or necessary, that conformity of an object to the specified requirements be attested, irrespective of the sector involved.
For the purposes of ISO/IEC 17050-1:2004, the object of a declaration of conformity can be a product, process, management system, person or body.

Konformitätsbewertung - Konformitätserklärung von Anbietern - Teil 1: Allgemeine Anforderungen (ISO/IEC 17050-1:2004, korrigierte Fassung 2007-06-15)

Dieser Teil von ISO/IEC 17050 legt allgemeine Anforderungen für Konformitätserklärungen von Anbietern für die Fälle fest, wo es wünschenswert und notwendig ist, dass die Konformität eines Gegenstandes mit festgelegten Anforderungen bestätigt wird, unabhängig vom berührten Bereich. Für die Anwendung dieses Teils von ISO/IEC 17050 kann der Gegenstand der Konformitätserklärung ein Produkt, ein Prozess, ein Managementsystem, eine Person oder eine Stelle sein.
Dieser Teil von ISO/IEC 17050 enthält keine besonderen Festlegungen für den Gegenstand der Konformitäts-erklärung.
Anstelle von „Konformitätserklärung eines Anbieters“ kann, wenn es angemessen erscheint, die Benennung „Konformitätserklärung“ verwendet werden.

Évaluation de la conformité - Déclaration de conformité du fournisseur - Partie 1: Exigences générales (ISO/IEC 17050-1:2004, version corrigée 2007-06-15)

L'ISO/CEI 17050-1:2005 spécifie les exigences générales applicables à la déclaration de conformité du fournisseur dans les cas où il est souhaitable, ou nécessaire, d'attester la conformité d'un objet à des exigences spécifiées, quel que soit le secteur concerné.
Pour les besoins de l'ISO/CEI 17050-1:2005, l'objet d'une déclaration de conformité peut être un produit, un processus, un système de management, une personne ou un organisme.

Ugotavljanje skladnosti - Dobaviteljeva izjava o skladnosti - 1. del: Splošne zahteve (ISO/IEC 17050-1:2004, popravljena verzija 2007-06-15)

Ta del ISO/IEC 17050 določa splošne zahteve za dobaviteljevo izjavo o skladnosti v primerih, kjer je zaželeno ali nujno, da je skladnost predmeta z določenimi zahtevami potrjena, ne glede na sektor. Za namene tega dela ISO/IEC 17050 je lahko predmet izjave o skladnosti proizvod, postopek, nadzorni sistem, oseba ali organ. Ta del ISO/IEC ne določa kakršen koli določen predmet za izjavo o skladnosti. Namesto »dobaviteljeve izjave o skladnosti« se lahko uporablja, kadar je primerno, izraz »izjava o skladnosti«.

General Information

Status
Published
Publication Date
13-Apr-2010
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
14-Apr-2010
Completion Date
14-Apr-2010

RELATIONS

Buy Standard

Standard
EN ISO/IEC 17050-1:2010
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO/IEC 17050-1:2010
01-julij-2010
1DGRPHãþD
SIST EN ISO/IEC 17050-1:2005
Ugotavljanje skladnosti - Dobaviteljeva izjava o skladnosti - 1. del: Splošne
zahteve (ISO/IEC 17050-1:2004, popravljena verzija 2007-06-15)
Conformity assessment - Supplier's declaration of conformity - Part 1: General
requirements (ISO/IEC 17050-1:2004, corrected version 2007-06-15)
Konformitätsbewertung - Konformitätserklärung von Anbietern - Teil 1: Allgemeine
Anforderungen (ISO/IEC 17050-1:2004, korrigierte Fassung 2007-06-15)

Evaluation de la conformité - Déclaration de conformité du fournisseur - Partie 1:

Exigences générales (ISO/IEC 17050-1:2004, version corrigée 2007-06-15)
Ta slovenski standard je istoveten z: EN ISO/IEC 17050-1:2010
ICS:
03.120.20 Certificiranje proizvodov in Product and company
podjetij. Ugotavljanje certification. Conformity
skladnosti assessment
SIST EN ISO/IEC 17050-1:2010 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO/IEC 17050-1:2010
---------------------- Page: 2 ----------------------
SIST EN ISO/IEC 17050-1:2010
EUROPEAN STANDARD
EN ISO/IEC 17050-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2010
ICS 03.120.20 Supersedes EN ISO/IEC 17050-1:2004
English version
Conformity assessment - Supplier's declaration of conformity -
Part 1: General requirements (ISO/IEC 17050-1:2004, corrected
version 2007-06-15)

Évaluation de la conformité - Déclaration de conformité du Konformitätsbewertung - Konformitätserklärung von

fournisseur - Partie 1: Exigences générales (ISO/IEC Anbietern - Teil 1: Allgemeine Anforderungen (ISO/IEC

17050-1:2004, version corrigée 2007-06-15) 17050-1:2004, korrigierte Fassung 2007-06-15)

This European Standard was approved by CEN on 13 March 2010.

CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving

this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning

such national standards may be obtained on application to the CEN Management Centre or to any CEN and CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN and CENELEC member into its own language and notified to the CEN Management Centre has the same

status as the official versions.

CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United

Kingdom.
CEN Management Centre: CENELEC Central Secretariat:
Avenue Marnix 17, B-1000 Brussels Avenue Marnix 17, B-1000 Brussels

© 2010 CEN/CENELEC All rights of exploitation in any form and by any means reserved Ref. No. EN ISO/IEC 17050-1:2010 E

worldwide for CEN national Members and for CENELEC
Members.
---------------------- Page: 3 ----------------------
SIST EN ISO/IEC 17050-1:2010
EN ISO/IEC 17050-1:2010 (E)
Contents Page

Foreword ..............................................................................................................................................................3

---------------------- Page: 4 ----------------------
SIST EN ISO/IEC 17050-1:2010
EN ISO/IEC 17050-1:2010 (E)
Foreword

The text of ISO/IEC 17050-1:2004, corrected version 2007-06-15 has been prepared by Committee on

conformity assessment (CASCO) of the International Organization for Standardization (ISO) and the

International Electrotechnical Commission (IEC) and has been taken over as EN ISO/IEC 17050-1:2010 by

Technical Committee CEN/CLC/TC 1 “Criteria for conformity assessment bodies” the secretariat of which is

held by BSI.

This European Standard shall be given the status of a national standard, either by publication of an identical

text or by endorsement, at the latest by October 2010, and conflicting national standards shall be withdrawn at

the latest by October 2010.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN ISO/IEC 17050-1:2004.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following

countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech

Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,

Sweden, Switzerland and the United Kingdom.
Endorsement notice

The text of ISO/IEC 17050-1:2004, corrected version 2007-06-15 has been approved by CEN as a EN

ISO/IEC 17050-1:2010 without any modification.
---------------------- Page: 5 ----------------------
SIST EN ISO/IEC 17050-1:2010
---------------------- Page: 6 ----------------------
SIST EN ISO/IEC 17050-1:2010
INTERNATIONAL ISO/IEC
STANDARD 17050-1
First edition
2004-10-01
Corrected version
2007-06-15
Conformity assessment — Supplier's
declaration of conformity —
Part 1:
General requirements
Évaluation de la conformité — Déclaration de conformité du
fournisseur —
Partie 1: Exigences générales
Reference number
ISO/IEC 17050-1:2004(E)
ISO 2004
---------------------- Page: 7 ----------------------
SIST EN ISO/IEC 17050-1:2010
ISO/IEC 17050-1:2004(E)
PDF disclaimer

This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but

shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In

downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat

accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.

Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation

parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In

the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

COPYRIGHT PROTECTED DOCUMENT
© ISO 2004

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,

electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or

ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2004 — All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO/IEC 17050-1:2010
ISO/IEC 17050-1:2004(E)
Foreword

ISO (the International Organization for Standardization) and IEC (the International Electrotechnical

Commission) form the specialized system for worldwide standardization. National bodies that are members of

ISO or IEC participate in the development of International Standards through technical committees

established by the respective organization to deal with particular fields of technical activity. ISO and IEC

technical committees collaborate in fields of mutual interest. Other international organizations, governmental

and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of conformity

assessment, the ISO Committee on conformity assessment (CASCO) is responsible for the development of

International Standards and Guides.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.

Draft International Standards are circulated to the national bodies for voting. Publication as an International

Standard requires approval by at least 75 % of the national bodies casting a vote.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. ISO shall not be held responsible for identifying any or all such patent rights.

ISO/IEC 17050-1 was prepared by the ISO Committee on conformity assessment (CASCO).

It was circulated for voting to the national bodies of both ISO and IEC, and was approved by both

organizations.

This first edition of ISO/IEC 17050-1, together with ISO/IEC 17050-2, cancels and replaces the second edition

of ISO/IEC Guide 22:1996, General criteria for supplier's declaration of conformity.

ISO/IEC 17050 consists of the following parts, under the general title Conformity assessment — Supplier's

declaration of conformity:
⎯ Part 1: General requirements
⎯ Part 2: Supporting documentation

This corrected version of ISO/IEC 17050-1:2004 incorporates the correction of the numbering of the list

in 10.2, and an updated Bibliography.
© ISO 2004 — All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO/IEC 17050-1:2010
ISO/IEC 17050-1:2004(E)
Introduction

This part of ISO/IEC 17050 has been developed with the objective of providing general requirements for a

supplier’s declaration of conformity.

It addresses one of the three types of attestation of conformity, namely attestation undertaken by the first party

(e.g. the supplier of a product). Other types are second-party attestation (e.g. where a user issues an

attestation for the product the user is using) or third-party attestation. Each of these three types is used in the

market in order to increase confidence in the conformity of an object.

This part of ISO/IEC 17050 specifies requirements applicable when the individual or organization responsible

for fulfilment of specified requirements (supplier) provides a declaration that a product (including service),

process, management system, person or body is in conformity with specified requirements, which can include

normative documents such as standards, guides, technical specifications, laws and regulations. Such a

declaration of conformity can also make reference to the results of assessments by one or more first, second

or third parties. Such references are not to be interpreted as reducing the responsibility of the supplier in any

way.

These general requirements are applicable to all sectors. However, these requirements might need to be

supplemented for specific purposes, for example for use in connection with regulations.

A supplier's declaration of conformity of a product (including service), process, management system, person

or body to specified requirements can be substantiated by supporting documentation under the responsibility

of the supplier. In cases where this is desirable, or necessary, reference is made to ISO/IEC 17050-2.

iv © ISO 2004 — All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO/IEC 17050-1:2010
INTERNATIONAL STANDARD ISO/IEC 17050-1:2004(E)
Conformity assessment — Supplier's declaration
of conformity —
Part 1:
General requirements
1 Scope

This part of ISO/IEC 17050 specifies general requirements for a supplier’s declaration of conformity in cases

where it is desirable, or necessary, that conformity of an object to the specified requirements be attested,

irrespective of the sector involved. For the purposes of this part of ISO/IEC 17050, the object of a declaration

of conformity can be a product, process, management system, person or body.

This part of ISO/IEC 17050 does not define any particular object for the declaration of conformity.

Instead of
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.