EN 15597-2:2019
(Main)Winter maintenance equipment - Spreading and spraying machines - Part 2: Requirements for distribution and their test
Winter maintenance equipment - Spreading and spraying machines - Part 2: Requirements for distribution and their test
This document gives the possibility to certify a model of vehicle-mounted or (trailer) dragged spreading machines for winter service with standard parameters, leaving the possibility to the manufacturer to evolve in performances. At the same time, information is given on the minimum content required for operating manuals.
This document is valid for machines which are used to spread the following media:
- not pre-wetted spreading agent (solid spreading agent);
- pre-wetted spreading agent;
- liquid spreading agent (brine).
The following points are not covered by this document:
- requirements for registration and approval;
- requirements made by automobile manufacturers;
- requirements on EN 15518 3.
Winterdienstausrüstung - Streumaschinen - Teil 2: Anforderungen an die Streustoffverteilung und deren Prüfung
Dieses Dokument ermöglicht die Prüfung einer aufgesetzten oder gezogenen (Anhänger-) Streumaschinenausführung für den Winterdienst mit Standardparametern, wobei dem Hersteller die Möglichkeit gegeben wird, die Leistung seiner Geräte weiterzuentwickeln. Gleichzeitig enthält es Angaben zu dem erforderlichen Mindestinhalt der Betriebsanleitungen.
Dieses Dokument gilt für Maschinen, die zum Streuen folgender Stoffe eingesetzt werden:
- nicht angefeuchtete Streustoffe (feste Streustoffe);
- angefeuchtete Streustoffe;
- flüssige Streustoffe (Sole).
Die folgenden Punkte werden in diesem Dokument nicht behandelt:
- Anforderungen an Registrierung und Zulassung;
- Anforderungen seitens der Automobilhersteller;
- Anforderungen nach EN 15518 3.
Équipement de viabilité hivernale - Épandeuses - Partie 2 : Prescriptions relatives à la distribution et essai
Le présent document permet de certifier un modèle de machines d'épandage montées sur véhicule ou tractées, destinées au service hivernal avec des paramètres standard, en laissant au fabricant la possibilité de faire évoluer ses performances. Parallèlement, des informations relatives au contenu minimal exigé dans les manuels d'utilisation sont décrites.
Le présent document applicable aux machines servant à épandre les produits suivants :
- produits d'épandage sans agent liquide (produits d'épandage solides) ;
- produits d'épandage avec agent liquide ;
- produits d'épandage liquides (saumure).
Le présent document ne couvre pas les aspects suivants :
- exigences d'enregistrement et d'agrément ;
- exigences imposées par les constructeurs d'automobiles ;
- prescriptions de l'EN 15518 3.
Oprema za zimsko vzdrževanje - Posipalniki in škropilniki - 2. del: Zahteve za raztros in njihovo preskušanje
Ta evropski standard podaja možnost za certificiranje modela posipalnikov, pritrjenih na vozilo, ali vlečenih posipalnikov (s prikolico) za zimsko službo s standardnimi parametri, pri čemer proizvajalcu dopušča možnost za izboljšanje lastnosti. Hkrati podaja informacije o minimalni zahtevani vsebini za navodila za uporabo.
Ta standard se uporablja za stroje, ki se uporabljajo za posipavanje naslednjih sredstev:
– sredstva za odtajanje, ki niso predhodno namočena (trdna sredstva za odtajanje);
– predhodno namočena sredstva za odtajanje;
– tekoča sredstva za odtajanje.
Ta standard ne zajema naslednjih točk:
– zahteve za registracijo in odobritev;
– zahteve proizvajalcev avtomobilov;
– zahteve v zvezi z varnostjo – te so obravnavane v standardu EN 13021;
– zahteve iz standarda EN 15518-3.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 15597-2:2020
01-februar-2020
Nadomešča:
SIST-TS CEN/TS 15597-2:2012
Oprema za zimsko vzdrževanje - Posipalniki in škropilniki - 2. del: Zahteve za
raztros in njihovo preskušanje
Winter maintenance equipment - Spreading and spraying machines - Part 2:
Requirements for distribution and their test
Winterdienstausrüstung - Streumaschinen - Teil 2: Anforderungen an die
Streustoffverteilung und deren Prüfung
Équipement de viabilité hivernale - Épandeuses - Partie 2: Exigences relatives à la
distribution et essai
Ta slovenski standard je istoveten z: EN 15597-2:2019
ICS:
43.160 Vozila za posebne namene Special purpose vehicles
SIST EN 15597-2:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 15597-2:2020
---------------------- Page: 2 ----------------------
SIST EN 15597-2:2020
EN 15597-2
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2019
EUROPÄISCHE NORM
ICS 13.030.40 Supersedes CEN/TS 15597-2:2012
English Version
Winter maintenance equipment - Spreading and spraying
machines - Part 2: Requirements for distribution and their
test
Équipement de viabilité hivernale - Épandeuses - Winterdienstausrüstung - Streumaschinen - Teil 2:
Partie 2 : Prescriptions relatives à la distribution et Anforderungen an die Streustoffverteilung und deren
essai Prüfung
This European Standard was approved by CEN on 2 September 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15597-2:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 15597-2:2020
EN 15597-2:2019 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Definition . 8
5 Test materials . 8
6 Certification procedure . 9
6.1 Principle of qualification procedure . 9
6.2 Identification and requirements on spreader types . 9
6.3 Procedure of the static test . 10
6.4 Dynamic test procedure. 14
Annex A
...
SLOVENSKI STANDARD
SIST EN 15597-2:2020
01-februar-2020
Nadomešča:
SIST-TS CEN/TS 15597-2:2012
Oprema za zimsko vzdrževanje - Posipalniki in škropilniki - 2. del: Zahteve za
raztros in njihovo preskušanje
Winter maintenance equipment - Spreading and spraying machines - Part 2:
Requirements for distribution and their test
Winterdienstausrüstung - Streumaschinen - Teil 2: Anforderungen an die
Streustoffverteilung und deren Prüfung
Équipement de viabilité hivernale - Épandeuses - Partie 2: Exigences relatives à la
distribution et essai
Ta slovenski standard je istoveten z: EN 15597-2:2019
ICS:
43.160 Vozila za posebne namene Special purpose vehicles
SIST EN 15597-2:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 15597-2:2020
---------------------- Page: 2 ----------------------
SIST EN 15597-2:2020
EN 15597-2
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2019
EUROPÄISCHE NORM
ICS 13.030.40 Supersedes CEN/TS 15597-2:2012
English Version
Winter maintenance equipment - Spreading and spraying
machines - Part 2: Requirements for distribution and their
test
Équipement de viabilité hivernale - Épandeuses - Winterdienstausrüstung - Streumaschinen - Teil 2:
Partie 2 : Prescriptions relatives à la distribution et Anforderungen an die Streustoffverteilung und deren
essai Prüfung
This European Standard was approved by CEN on 2 September 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15597-2:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 15597-2:2020
EN 15597-2:2019 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Definition . 8
5 Test materials . 8
6 Certification procedure . 9
6.1 Principle of qualification procedure . 9
6.2 Identification and requirements on spreader types . 9
6.3 Procedure of the static test . 10
6.4 Dynamic test procedure. 14
Annex A
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.