EN 13458-3:2003/A1:2005

Cryogenic vessels - Static vacuum insulated vessels - Part 3: Operational requirements

This European Standard specifies operational requirements for static vacuum insulated vessels designed for a maximum allowable pressure of more than 0.5 bar. It may also be used as a guideline for vessels designed for a maximum allowable pressure of less than 0,5 bar.
This European Standard applies to vessels designed for cryogenic fluids specified in EN 13458-1.

Kryo-Behälter - Ortsfeste vakuum-isolierte Behälter - Teil 3: Betriebsanforderungen

Récipients cryogéniques - Récipients fixes isolés sous vide - Partie 3: Exigences opérationnelles

Kriogene posode – Stabilne vakuumsko izolirane posode – 3. del: Obratovalne zahteve

General Information

• Status: Withdrawn
• Publication Date: 28-Jun-2005
• Withdrawal Date: 15-Dec-2015
• ICS: 23.020.40 - Cryogenic vessels
• Technical Committee: CEN/TC 268 - Cryogenic vessels
• Drafting Committee: CEN/TC 268 - Cryogenic vessels
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 16-Dec-2015
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 13458-3:2003/A1:2005 - Cryogenic vessels - Static vacuum insulated vessels - Part 3: Operational requirements

Relations

• Replaced By: EN ISO 21009-2:2015 - Cryogenic vessels - Static vacuum insulated vessels - Part 2: Operational requirements (ISO 21009-2:2015)
• Effective Date: 23-Dec-2015
• Amends: EN 13458-3:2003 - Cryogenic vessels - Static vacuum insulated vessels - Part 3: Operational requirements
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2005
Kriogene posode – Stabilne vakuumsko izolirane posode – 3. del: Obratovalne
zahteve
Cryogenic vessels - Static vacuum insulated vessels - Part 3: Operational requirements
Kryo-Behälter - Ortsfeste vakuum-isolierte Behälter - Teil 3: Betriebsanforderungen
Récipients cryogéniques - Récipients fixes isolés sous vide - Partie 3: Exigences
opérationnelles
Ta slovenski standard je istoveten z: EN 13458-3:2003/A1:2005
ICS:
23.020.40
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 13458-3:2003/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2005
ICS 23.020.40
English Version
Cryogenic vessels - Static vacuum insulated vessels - Part 3:
Operational requirements
Récipients cryogéniques - Récipients fixes isolés sous vide Kryo-Behälter - Ortsfeste vakuum-isolierte Behälter - Teil 3:
- Partie 3: Exigences de opérationnelles Betriebsanforderungen
This amendment A1 modifies the European Standard EN 13458-3:2003; it was approved by CEN on 19 May 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Manag
...