EN ISO 4628-10:2003

Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion (ISO 4628-10:2003)

ISO 4628-10:2003 describes a method for assessing the amount of filiform corrosion developed from a scribed mark by measuring the length of the longest filament L and the most frequent length M of the filaments.
Pictorial examples are provided in an annex to illustrate different ratings for the length of the longest filament L and the most frequent filament length M.

Beschichtungsstoffe - Beurteilung von Beschichtungsschäden - Beurteilung der Menge und der Größe von Schäden und der Intensität von gleichmäßigen Veränderungen im Aussehen - Teil 10: Bewertung der Filiformkorrosion (ISO 4628-10:2003)

Dieser Teil von ISO 4628 legt ein System zum Bewerten des Ausmaßes von Filiformkorrosion, die von einem Ritz ausgeht, fest. Gemessen werden die Länge des längsten Fadens L und die häufigste Menge von Fäden M.
Die Vergleichsbilder im Anhang A dieses Teiles von ISO 4628 verdeutlichen unterschiedliche Einteilungen für die Länge des längsten Fadens L und die häufigste Menge von Filiformfäden M. Ein Vergleich der Probenplatten mit den 12 Bildern im Anhang A ersetzt nicht die verbindliche numerische Bewertung (Verfahren 1 oder 2).

Peintures et vernis - Evaluation de la dégradation des revêtements - Désignation de la quantité et de la dimension des défauts, et de l'intensité des changements uniformes d'aspect - Partie 10: Evaluation du degré de corrosion filiforme (ISO 4628-10:2003)

L'ISO 4628-10:2003 spécifie une méthode qui permet d'évaluer la quantité de corrosion filiforme qui se développe à partir d'une rayure, en mesurant la longueur du filament le plus long L et la longueur la plus fréquente M des filaments.
Des illustrations qui montrent la longueur du filament le plus long L et la longueur la plus fréquente M des filaments sont fournies dans une annexe.

Barve in laki – Ovrednotenje propadanja premazov – Ugotavljanje obsega in velikosti poškodb ter intenzitete enakomernih sprememb videza – 10. del: Ocenjevanje stopnje nitaste (filiformne) korozije (ISO 4628-10:2003)

General Information

• Status: Withdrawn
• Publication Date: 31-Aug-2003
• Withdrawal Date: 09-Feb-2016
• ICS: 87.040 - Paints and varnishes
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139 - Paints and varnishes
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 10-Feb-2016
• Ref Project: SIST EN ISO 4628-10:2004 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion (ISO 4628-10:2003)

Relations

• Replaced By: EN ISO 4628-10:2016 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion (ISO 4628-10:2016, Corrected version 2016-06-01)
• Effective Date: 16-Apr-2014

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2004
Barve in laki – Ovrednotenje propadanja premazov – Ugotavljanje obsega in
velikosti poškodb ter intenzitete enakomernih sprememb videza – 10. del:
Ocenjevanje stopnje nitaste (filiformne) korozije (ISO 4628-10:2003)
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity
and size of defects, and of intensity of uniform changes in appearance - Part 10:
Assessment of degree of filiform corrosion (ISO 4628-10:2003)
Beschichtungsstoffe - Beurteilung von Beschichtungsschäden - Beurteilung der Menge
und der Größe von Schäden und der Intensität von gleichmäßigen Veränderungen im
Aussehen - Teil 10: Bewertung der Filiformkorrosion (ISO 4628-10:2003)
Peintures et vernis - Evaluation de la dégradation des revetements - Désignation de la
quantité et de la dimension des défauts, et de l'intensité des changements uniformes
d'aspect - Partie 10: Evaluation du degré de corrosion filiforme (ISO 4628-10:2003)
Ta slovenski standard je istoveten z: EN ISO 4628-10:2003
ICS:
87.040 Barve in laki Paints and varnishes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 4628-10
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2003
ICS 87.040
English version
Paints and varnishes - Evaluation of degradation of coatings -
Designation of quantity and size of defects, and of intensity of
uniform changes in appearance - Part 10: Assessment of
degree of filiform corrosion (ISO 4628-10:2003)
Peintures et vernis - Evaluation de la dégradation des Beschichtungsstoffe - Beurteilung von
revêtements - Désignation de la quantité et de la dimension Beschichtungsschäden - Beurteilung der Menge und der
des défauts, et de l'intensité des changements uniformes Größe von Schäden und der Intensität von gleichmäßigen
d'aspect - Partie 10: Evaluation du degré de corrosion Veränderungen im Aussehen - Teil 10: Bewertung der
filiforme (ISO 4628-10:2003) Filiformkorrosion (ISO 4628-10:2003)
This European Standard was approved by CEN on 1 August 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4628-10:2003 E
worldwide for CEN national Members.

Foreword
This document (EN ISO 4628-10:2003) has been prepared by Technical Committee ISO/TC 35
"Paints and varnishes" in collaboration with Technical Committee CEN/TC 139 "Paints and
varnishes", the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by March 2004, and conflicting national
standards shall be withdrawn at the latest by March 2004.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and
the United Kingdom.
NOTE FROM CMC  The foreword is susceptible to be amended on reception of the German
language version. The confirmed or amended foreword, and when appropriate, the normative
annex ZA for the references to international publications with their relevant European
publications will be circulated with the German version.
Endorsement notice
The text of ISO 4628-10:2003 has been approved by CEN as EN ISO 4628-10:2003 without any
modifications.
INTERNATIONAL ISO
STANDARD 4628-10
First edition
2003-09-01
Paints and varnishes — Evaluation of
degradation of coatings — Designation of
quantity and size of defects, and of
intensity of uniform changes in
appearance —
Part 10:
Assessment of degree of filiform
corrosion
Peintures et vernis — Évaluation de la dégradation des revêtements —
Désignation de la quantité et de la dimension des défauts, et de
l'intensité des changements uniformes d'aspect —
Partie 10: Évaluation du degré de corrosion filiforme

Reference number
ISO 4628-10:2003(E)
©
ISO 2003
ISO 4628-10:2003(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2003
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2003 — All rights reserved

ISO 4628-10:2003(E)
Contents Page
Foreword. iv
1 Scope. 1
2 Terms and definitions. 1
3 Assessment . 1
4 Expression of results. 2
5 Test report.
...