EN ISO 9692-1:2003
(Main)Welding and allied processes - Recommendations for joint preparation - Part 1: Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels (ISO 9692-1:2003)
Welding and allied processes - Recommendations for joint preparation - Part 1: Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels (ISO 9692-1:2003)
ISO 9692-1:2004 specifies types of joint preparation for metal-arc welding with covered electrode, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steel. It applies to joint preparation for full penetration butt welds and for fillet welds.
Schweißen und verwandte Prozesse - Empfehlungen zur Schweißnahtvorbereitung - Teil 1: Lichtbogenhandschweißen, Schutzgasschweißen, Gasschweißen, WIG-Schweißen und Strahlschweißen von Stählen (ISO 9692-1:2003)
Dieser Teil von ISO 9692 legt Arten der Schweißnahtvorbereitung für Stahl für Lichtbogenhandschweißen, Metall-Schutzgasschweißen, Gasschweißen, WIG-Schweißen und Strahlschweißen fest (siehe Abschnitte 3 und 4).
Sie gilt für Schweißnahtvorbereitungen für vollangeschlossene Querschnitte an Stumpfnähten und Kehlnähten Für nicht vollangeschlossene Querschnitte können die Arten der Schweißnahtvorbereitung und Maße abweichend von diesem Teil von ISO 9692 festgelegt werden.
Die Stegabstände in diesem Teil von ISO 9692 sind als diejenigen nach dem Heftschweißen zu verstehen, falls angewendet.
Zu beachten sind Änderungen von Einzelheiten zur Schweißnahtvorbereitung (wo zutreffend), um Schweißbadsicherungen (Unterlagen), "einseitiges Schweißen" usw. zu ermöglichen.
Soudage et techniques connexes - Recommandations pour la préparation de joints - Partie 1: Soudage manuel à l'arc avec électrode enrobée, soudage à l'arc avec électrode fusible sous protection gazeuse, soudage aux gaz, soudage TIG et soudage par faisceau des aciers (ISO 9692-1:2003)
L'ISO 9692-1:2004 spécifie les types de préparation de joints pour soudage à l'arc avec électrode enrobée, soudage à l'arc avec électrode fusible sous protection gazeuse, soudage aux gaz, soudage TIG et soudage par faisceau des aciers. Elle s'applique à la préparation de joints pour soudures bout à bout à pleine pénétration et pour les soudures d'angle.
Varjenje in sorodni postopki - Priporočila za pripravo zvarnih robov na jeklih - 1. del: Ročno obločno varjenje, obločno varjenje v zaščitnih plinih, plamensko varjenje, varjenje TIG in varjenje s snopom (ISO 9692-1:2003)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2004
9DUMHQMHLQVRURGQLSRVWRSNL3ULSRURþLOD]DSULSUDYR]YDUQLKURERYQDMHNOLK
GHO 5RþQRREORþQRYDUMHQMHREORþQRYDUMHQMHY]DãþLWQLKSOLQLKSODPHQVNR
YDUMHQMHYDUMHQMH7,*LQYDUMHQMHVVQRSRP ,62
Welding and allied processes - Recommendations for joint preparation - Part 1: Manual
metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam
welding of steels (ISO 9692-1:2003)
Schweißen und verwandte Prozesse - Empfehlungen zur Schweißnahtvorbereitung - Teil
1: Lichtbogenhandschweißen, Schutzgasschweißen, Gasschweißen, WIG-Schweißen
und Strahlschweißen von Stählen (ISO 9692-1:2003)
Soudage et techniques connexes - Recommandations pour la préparation de joints -
Partie 1: Soudage manuel a l'arc avec électrode enrobée, soudage a l'arc avec électrode
fusible sous protection gazeuse, soudage aux gaz, soudage TIG et soudage par
faisceau des aciers (ISO 9692-1:2003)
Ta slovenski standard je istoveten z: EN ISO 9692-1:2003
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 9692-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2003
ICS 21.160.40 Supersedes EN ISO 29692:1994
English version
Welding and allied processes - Recommendations for joint
preparation - Part 1: Manual metal-arc welding, gas-shielded
metal-arc welding, gas welding, TIG welding and beam welding
of steels (ISO 9692-1:2003)
Soudage et techniques connexes - Recommandations pour Schweißen und verwandte Prozesse - Empfehlungen zur
la préparation de joints - Partie 1: Soudage manuel à l'arc Schweißnahtvorbereitung - Teil 1:
avec électrode enrobée, soudage à l'arc avec électrode Lichtbogenhandschweißen, Schutzgasschweißen,
fusible sous protection gazeuse, soudage aux gaz, Gasschweißen, WIG-Schweißen und Strahlschweißen von
soudage TIG et soudage par faisceau des aciers (ISO Stählen (ISO 9692-1:2003)
9692-1:2003)
This European Standard was approved by CEN on 8 December 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9692-1:2003 E
worldwide for CEN national Members.
CORRECTED 2004-03-03
Foreword
This document (EN ISO 9692-1:2003) has been prepared by Technical Committee ISO/TC 44
"Welding and allied processes" in collaboration with Technical Committee CEN/TC 121
"Welding", the secretariat of which is held by DS.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by June 2004, and conflicting national
standards shall be withdrawn at the latest by June 2004.
This document supersedes EN ISO 29692:1994.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and
the United Kingdom.
Endorsement notice
The text of ISO 9692-1:2003 has been approved by CEN as EN ISO 9692-1:2003 without any
modifications.
NOTE Normative references to International Standards are listed in annex ZA (normative).
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications, indicated
by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 2553 1992 Welded, brazed and soldered joints EN 22553 1994
- Symbolic representation on
drawings
ISO 6947 1993 Welds - Working positions - EN ISO 6947 1997
Definitions of angles of slope and
rotation
INTERNATIONAL ISO
STANDARD 9692-1
First edition
2003-12-15
Welding and allied processes —
Recommendations for joint
preparation —
Part 1:
Manual metal-arc welding, gas-shielded
metal-arc welding, gas welding, TIG
welding and beam welding of steels
Soudage et techniques connexes — Recommandations pour la
préparation de joints —
Partie 1: Soudage manuel à l'arc avec électrode enrobée, soudage à
l'arc avec électrode fusible sous protection gazeuse, soudage aux gaz,
soudage TIG et soudage par faisceau des aciers
Reference number
ISO 9692-1:2003(E)
©
ISO 2003
ISO 9692-1:2003(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2003
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2003 – All rights reserved
ISO 9692-1:2003(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope. 1
2 Normative references. 1
3 Materials. 1
4 Welding processes. 2
5 Finish. 2
6 Type of joint preparation. 2
ISO 9692-1:2003(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 9692-1 was prepared by Technical Committee ISO/TC 44, Welding and allied processes, Subcommittee
SC 7, Representation and terms.
This first edition of ISO 9692-1 cancels and replaces ISO 9692:1992 which has been technically revised.
ISO 9692 consists of the following parts, under the general title Welding and allied processes —
Recommendations for joint preparation:
Part 1: Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam
welding of steels
Part 2: Submerged arc welding of steels
Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys
Part 4: Clad steels
iv © ISO 2003 – All rights reserved
ISO 9692-1:2003(E)
Introduction
This part of ISO 9692 defines the parameters characterizing the joint preparation and the collection of
frequently recurring values and shapes.
The recommendations given in this part of ISO 9692 have been compiled on the basis of experience and
contain dimensions for types of joint preparation that are generally found to lead to suitable welding conditions.
However, the extended field of application makes it necessary to give a range of dimensions. The dimension
ranges specified represent design limits and are not tolerances for manufacturing purposes. Manufacturing
limits depend, for instance, on welding process, parent metal, welding position, quality level, etc. Because of
the common character of this part of ISO 9692, the examples given cannot be regarded as the only solution
for the selection of a joint type.
Specific fields of application and manufacturing requirements (e.g. pipeline construction) may be covered by
selected ranges specified in other standards adapted from this basic part of ISO 9692.
Request for an official interpretation of technical aspects of this part of ISO 9692 should be directed to the
relevant secretariat of ISO/TC 44/SC 7 via the user's national standardization body; a listing of these bodies
can be found at www.iso.org.
INTERNATIONAL STANDARD ISO 9692-1:2003(E)
Welding and allied processes — Recommendations for joint
preparation —
Part 1:
Manual metal-arc welding, gas-shielded metal-arc welding, gas
welding, TIG welding and beam welding of steels
1 Scope
This part of ISO 9692 specifies types of joint preparation for metal-arc welding with covered electrode,
gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steel (see Clauses 3 and 4).
It applies to joint preparation for full penetration butt welds and for fillet welds. For partial penetration butt
welds, types of joint preparation and dimensions differing from those specified in this part of ISO 9692 may be
stipulated.
The root gaps referred to in this part of ISO 9692 are those gaps presented after tack welding, if used.
Consideration should be given to altering the joint preparation details (where appropriate) to facilitate
temporary backing, “one-sided welding”, etc.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 2553:1992, Welded, brazed and soldered joints — Symbolic representation on drawings
ISO 4063, Welding and allied processes — Nomenclature of processes and reference numbers
ISO 6947, Welds — Working positions — Definitions of angles of slope and rotation
3 Materials
Joint preparations recommended in this part of ISO 9692 are suitable for all kinds of steel.
SIST EN
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.