CEN ISO/TR 16401-1:2018

Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-2 - Part 1: Test suite structure and test purposes (ISO/TR 16401-1:2018)

ISO/TR 16401-1:2018 covers the test purposes for Front End Communications API covering functionalities related to instance handling, session handling, communication service primitives (i.e. sending/receiving of ADUs) and visible state transitions. It covers EFC communication services described in ISO 17575‑2:2016, Clause 5 and PICS proforma in ISO 17575‑2:2016, B.2. Claims related to Front End storage capacity are out of scope of this document.
ISO/TR 16401-1:2018 covers the test purposes for Front End Application related to session establishment on Back End request and related to session re-establishment when session requested by Back End failed. There are no other claims with respect to Front End Application described in ISO 17575‑2.
The underlying communication technology requirements for layer 1 to 4 specified in ISO 17575‑2:2016, Clause 6 are out of scope of this document.
Similarly, Back End Communications API is out of scope of this document. According to ISO 17575‑2 it is expected that these Front End Communications API will be "reflected" in the BE; however, BE Communications API is out of scope of ISO 17575‑2.
Test purposes have been organized into the test suite groups, designated for the Front End Communications API and Front End Application, respectively.
Aside from the test purposes, this document also provides proforma conformance test reports templates for both the Front End and Back End test purposes.
ISO 17575‑2 contains more information regarding the requirements against which the conformance is evaluated in this document.

Elektronische Gebührenerhebung - Konformitätsevaluierung von Einrichtungen nach ISO/TS 17575-2 - Teil 1: Struktur und Zweck des Prüfprogrammes (ISO/TR 16401-1:2018)

Perception du télépéage - Évaluation de conformité de l'équipement à l'ISO/TS 17575-2 - Partie 1: Structure de la suite d'essais et objectifs d'essai (ISO/TR 16401-1:2018)

Elektronsko pobiranje pristojbin - Ugotavljanje skladnosti opreme s tehnično specifikacijo ISO/TS 17575-2 - 1. del: Zgradba preskuševalnega niza in namen preskušanja (ISO/TR 16401-1:2018)

Ta dokument zajema namen preskušanja za čelni komunikacijski programski vmesnik, ki zajema funkcije, povezane z obravnavanjem dogodkov, obravnavanjem sej, primitivi komunikacijskih storitev (tj. pošiljanje in prejemanje ADU) in vidnim stanjem prenosa. Zajema komunikacijske storitve elektronskega pobiranja pristojbin, opisanih v ISO 17575-2:2016, točka 5, in Izjave o skladnosti izvedbe protokola (PICS), pro forma v ISO 17575-2:2016, B.2. Zahteve, povezane s kapaciteto spomina čelnega dela sistema, ne spadajo na področje uporabe tega dokumenta.
Ta dokument zajema namen preskušanja za čelno aplikacijo v zvezi z vzpostavitvijo seje na podlagi zahteve zalednega dela sistema in v zvezi s ponovno vzpostavitvijo seje, kadar je bila prekinjena seja, ki jo je zahteval zaledni del sistema.
Drugih zahtev v zvezi s čelno aplikacijo iz ISO 17575-2 ni. Osnovne zahteve glede komunikacijske tehnologije za plasti 1 do 4, določene v točki 6 tehnične specifikacije ISO 17575-2:2016 ne spadajo na področje uporabe tega dokumenta.
Prav tako na področje uporabe tega dokumenta ne spada zaledni komunikacijski programski vmesnik. V skladu s tehnično specifikacijo ISO 17575-2 se pričakuje, da bodo ti čelni komunikacijski programski vmesniki izraženi v zalednem (BE) komunikacijskem programskem vmesniku, čeprav zaledni komunikacijski programski vmesnik ne spada na področje uporabe tehnične specifikacije ISO 17575-2.
Nameni preskušanja so organizirani po skupinah preskuševalnih nizov, ki so zasnovani za čelni komunikacijski programski vmesnik in za čelno aplikacijo.
Ta dokument poleg namenov preskušanja določa tudi predloge za poročila o pro forma preskušanju skladnosti za namene preskušanja čelnega in zalednega dela.
Standard ISO 17575-2 vsebuje več informacij glede zahtev, na podlagi katerih se vrednoti skladnost v tem dokumentu.

General Information

• Status: Withdrawn
• Publication Date: 06-Feb-2018
• Withdrawal Date: 08-Aug-2023
• ICS: 03.220.20 - Road transport
• ICS: 35.240.60 - IT applications in transport
• Technical Committee: CEN/TC 278 - Road transport and traffic telematics
• Drafting Committee: CEN/TC 278/WG 1 - Electronic fee collection and access control (EFC)
• Directive: 2004/54/EC - Directive 2004/52/EC of the European Parliament and of the Council of 29 April 2004 on the interoperability of electronic road toll systems in the Community (Text with EEA relevance)
• Mandate: M/338 - Standardisation mandate to CEN, CENELEC and ETSI in support of interoperabilty of electonic road toll systems in the community
• Ref Project: SIST-TP CEN ISO/TR 16401-1:2018 - Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-2 - Part 1: Test suite structure and test purposes (ISO/TR 16401-1:2018)

Relations

• Replaces: CEN ISO/TS 16401-1:2012 - Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-2 - Part 1: Test suite structure and test purposes (ISO/TS 16401-1:2012)
• Effective Date: 11-Nov-2015

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2018
1DGRPHãþD
SIST-TS CEN ISO/TS 16401-1:2012
(OHNWURQVNRSRELUDQMHSULVWRMELQ8JRWDYOMDQMHVNODGQRVWLRSUHPHVWHKQLþQR
VSHFLILNDFLMR,6276GHO=JUDGEDSUHVNXãHYDOQHJDQL]DLQQDPHQ
SUHVNXãDQMD,6275
Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-2 -
Part 1: Test suite structure and test purposes (ISO/TR 16401-1:2018)
Elektronische Gebührenerhebung - Konformitätsevaluierung von Einrichtungen nach
ISO/TS 17575-2 - Teil 1: Struktur und Zweck des Prüfprogrammes (ISO/TR 16401-
1:2018)
Perception du télépéage - Évaluation de conformité de l'équipement à l'ISO/TS 17575-2 -
Partie 1: Structure de la suite d'essais et objectifs d'essai (ISO/TR 16401-1:2018)
Ta slovenski standard je istoveten z: CEN ISO/TR 16401-1:2018
ICS:
03.220.20 Cestni transport Road transport
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

CEN ISO/TR 16401-1
TECHNICAL REPORT
RAPPORT TECHNIQUE
February 2018
TECHNISCHER BERICHT
ICS 03.220.20; 35.240.60 Supersedes CEN ISO/TS 16401-1:2012
English Version
Electronic fee collection - Evaluation of equipment for
conformity to ISO/TS 17575-2 - Part 1: Test suite structure
and test purposes (ISO/TR 16401-1:2018)
Perception du télépéage - Évaluation de conformité de Elektronische Gebührenerhebung -
l'équipement à l'ISO/TS 17575-2 - Partie 1: Structure Konformitätsevaluierung von Einrichtungen nach
de la suite d'essais et objectifs d'essai (ISO/TR 16401- ISO/TS 17575-2 - Teil 1: Struktur und Zweck des
1:2018) Prüfprogrammes (ISO/TR 16401-1:2018)

This Technical Report was approved by CEN on 14 January 2018. It has been drawn up by the Technical Committee CEN/TC 278.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TR 16401-1:2018 E
worldwide for CEN national Members.

Contents Page
European Foreword . 3

European Foreword
This document (CEN ISO/TR 16401-1:2018) has been prepared by Technical Committee ISO/TC 204
"Intelligent transport systems" in collaboration with Technical Committee CEN/TC 278 “Intelligent
transport systems” the secretariat of which is held by NEN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN ISO/TS 16401-1:2012.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
Endorsement notice
The text of ISO/TR 16401-1:2018 has been approved by CEN as CEN ISO/TR 16401-1:2018 without any
modification.
TECHNICAL ISO/TR
REPORT 16401-1
First edition
2018-01
Electronic fee collection — Evaluation
of equipment for conformity to ISO/TS
17575-2 —
Part 1:
Test suite structure and test purposes
Perception du télépéage — Évaluation de conformité de l'équipement
à l'ISO/TS 17575-2 —
Partie 1: Structure de la suite d'essais et objectifs d'essai
Reference number
ISO/TR 16401-1:2018(E)
©
ISO 2018
ISO/TR 16401-1:2018(E)
© ISO 2018, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2018 – All rights reserved

ISO/TR 16401-1:2018(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Abbreviated terms . 4
5 Test Suite Structure . 5
5.1 Structure . 5
5.2 Reference to conformance test specifications . 5
5.3 Test purposes (TP) . 5
5.3.1 TP definition conventions . 5
5.3.2 TP naming conventions . 6
5.4 Protocol Conformance Test Report (PCTR). 7
Annex A (informative) Test purposes (TP) for Front End Communications API.8
Annex B (informative) Test purposes (TP) for Front End Application .137
Annex C (informative) PCTR proforma for Front End Communications API .141
Annex D (informative) PCTR proforma for Front End Application .148
Bibliography .152
ISO/TR 16401-1:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see the following
URL: www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 204, Intelligent transport systems.
This edition of ISO/TR 16401-1 cancels and replaces ISO/TS 16401-1:2012, which has been technically
revised.
The main changes compared to the previous edition are as follows:
— the document has been converted from a Technical Specification to a Technical Report;
— the terms and definitions have been revised;
— the test purpose naming convention has been changed, i.e. “/” has been replaced by “_”;
— editorial corrections, as well as changes to improve readability have been made.
A list of all parts in the ISO/TR 16401 series can be found on the ISO website.
iv © ISO 2018 – All rights reserved

ISO/TR 16401-1:2018(E)
Introduction
This document is part of a set of standards that supports interoperability of autonomous electronic fee
collection (EFC) systems. Autonomous systems use satellite positioning, often combined with additional
sensor technologies such as gyroscopes, odometers and accelerometers, to localize the vehicle and to
find its position on a map containing the charged geographic objects, such as charged roads or charged
areas. From the charged objects, the vehicle characteristics, the time of day and other data that are
relevant for describing road use, the tariff and ultimately, the road usage fee is determined.
The ISO/TR 16401 series provides tests to assess the Front End Communications API and Front End
Application behaviours compliancy towards the requirements listed in ISO 17575-2. This document
contains the definition of such tests in the form of test purposes, listing the initial conditions, references
and individual steps in a structured textual manner. ISO/TR 16401-2 contains the identical tests
written in Testing and Test Control Notation version 3 (TTCN v3).
Autonomous on-board equipment (OBE) operates without relying on dedicated roadside infrastructure
by employing wide-area technologies such as Global Navigation Satellite Systems (GNSS) and Cellular
Communications Networks (CN). Therefore, autonomous systems can also be referred to as GNSS/CN
systems.
ISO/TR 16401-1 is based on
— ISO 17575-2, and
— the ISO 9646 family of standards on conformance test methodology.
TECHNICAL REPORT ISO/TR 16401-1:2018(E)
Electronic fee collection — Evaluation of equipment for
conformity to ISO/TS 17575-2 —
Part 1:
Test suite structure and test purposes
1 Scope
This document covers the test purposes for Front End Communications API covering functionalities
related to instance handling, session handling, communication service primitives (i.e.
sending/receiving of ADUs) and visible state transitions. It covers EFC communication services
described in ISO 17575-2:2016, Clause 5 and PICS proforma in ISO 17575-2:2016, B.2. Claims related to
Front End storage capacity are out of scope of this document.
This document covers the test purposes for Front End Application related to session establishment on
Back End request and related to session re-establishment when session requested by Back End failed.
There are no other claims with respect to Front End Application described in ISO 17575-2.
The underlying communication technology requirements for layer 1 to 4 specified in ISO 17575-2:2016,
Clause 6 are out of scope of this document.
Similarly, Back End Communications API is out of scope of this document. According to ISO 17575-2
it is expected that these Front End Communications API will be “reflected” in the BE; however, BE
Communications API is out of scope of ISO 17575-2.
Test purposes have been organized into the test suite groups, designated for the Front E
...