EN ISO 10545-9:1996

Ceramic tiles - Part 9: Determination of resistance to thermal shock (ISO 10545-9:1994)

Defines a test method for determining the resistance to thermal shock of all ceramic tiles under normal conditions of use. Depending on the water absorption of the tiles, different procedures (tests with or without immersions) are used unless there is an agreement to the contrary.

Keramische Fliesen und Platten - Teil 9: Bestimmung der Temperaturwechselbeständigkeit (ISO 10545-9:1994)

Dieser Teil von ISO 10545 legt ein Prüfverfahren fest, mit dem die Temperaturwechselbeständigkeit von keramischen Fliesen und Platten unter üblichen Gebrauchsbedingungen bestimmt wird. Sofern nichts vereinbart wurde, werden in Abhängigkeit von der Wasseraufnahme der Fliesen und Platten unterschiedliche Verfahren (mit und ohne Eintauchen) angewendet.

Carreaux et dalles céramiques - Partie 9: Détermination de la résistance aux chocs thermiques (ISO 10545-9:1994)

La présente partie de l'ISO 10545 prescrit une méthode pour la détermination de la résistance aux chocs thermiques pour tous les carreaux céramiques dans les conditions normales d'utilisation. Selon l'absorption d'eau des carreaux, différents procédés sont utilisés (essais avec ou sans immersion), sauf accord contraire.
NOTE 1 L'ISO 13006:--, Carreaux et dalles céramiques -- Définitions, classification, caractéristiques et marquage (à publier), prescrit les exigences requises pour les propriétés des carreaux et dalles céramiques et fournit d'autres informations utiles sur ces produits.

Keramične ploščice - 9. del: Ugotavljanje odpornosti proti hitrim temperaturnim spremembam

General Information

• Status: Withdrawn
• Publication Date: 20-Aug-1996
• Withdrawal Date: 09-Jul-2013
• ICS: 91.100.25 - Terracotta building products
• Technical Committee: CEN/TC 67 - Ceramic tiles
• Drafting Committee: CEN/TC 67 - Ceramic tiles
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 10-Jul-2013
• Completion Date: 10-Jul-2013
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN ISO 10545-9:1998 - Ceramic tiles - Part 9: Determination of resistance to thermal shock (ISO 10545-9:1994)

Relations

• Replaced By: EN ISO 10545-9:2013 - Ceramic tiles - Part 9: Determination of resistance to thermal shock (ISO 10545-9:2013)
• Effective Date: 17-Jul-2013

Standards Content (Sample)

SLOVENSKI STANDARD
01-april-1998
.HUDPLþQHSORãþLFHGHO8JRWDYOMDQMHRGSRUQRVWLSURWLKLWULPWHPSHUDWXUQLP
VSUHPHPEDP
Ceramic tiles - Part 9: Determination of resistance to thermal shock (ISO 10545-9:1994)
Keramische Fliesen und Platten - Teil 9: Bestimmung der
Temperaturwechselbeständigkeit (ISO 10545-9:1994)
Carreaux et dalles céramiques - Partie 9: Détermination de la résistance aux chocs
thermiques (ISO 10545-9:1994)
Ta slovenski standard je istoveten z: EN ISO 10545-9:1996
ICS:
91.100.23 .HUDPLþQHSORãþLFH Ceramic tiles
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

INTERNATIONAL IS0
STANDARD 105459
First edition
1994-08-l 5
Ceramic tiles -
Part 9:
Determination of resistance to thermal shock
Carreaux et dales c&amiques -
Partie 9: Ddtermination de la r&istance aux chocs thermiques
Reference number
IS0 10545-g: 1994(E)
IS0 105459:1994(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work
of preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. IS0
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard IS0 10545-g was prepared by Technical Committee
ISOnC 189, Ceramic tile.
IS0 10545 consists of the following parts, under the general title Ceramic
tiles:
- Part 1: Sampling and basis for acceptance
- Part 2: Determination of dimensions and surface quality
- Part 3: De termination of water absorption, apparent porosity, appar-
ent relative density and bulk density
- Part 4: Determination of modulus of rupture and breaking strength
- Part 5: Determination of impact resistance by measurement of co-
efficient of restitution
- Part 6: Determination of resistance to deep abrasion for unglazed
tiles
- Part 7: Determination of resistance to surface abrasion for glazed
tiles
- Part 8: Determination of linear thermal expansion
0 IS0 1994
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-1211 Geneve 20 l Switzerland
Printed in Switzerland
ii
0 IS0
IS0 10545=9:1994(E)
- Part 9: Determination of resistance to thermal shock
- Part 10: Determination of moisture expansion
- Part 11: Determination of crazing resistance for glazed tiles
- Part 12: Determination of frost resistance
Part 13: Determination of chemical resistance
-
14:
- Part Determination of resistance to stains
- Part 15: Extraction of lead and cadmium from glazed tiles
- Part 16: Determination of colour differences
- Part 17: Determination of toe fficien t of friction

This page intentionally left blank

INTERNATIONAL STANDARD 0 IS0 IS0 10545-9: 1994(E)
Ceramic tiles -
Part 9:
Determination of resistance to thermal shock
a whole tile by cycling 10 times between the tem-
1 Scope
peratures of 15 “C and 145 “C.
This part of IS0 10545 defines a test method for de-
termining the resistance to thermal shock of all cer-
4 Apparatus
...