EN 10296-2:2005

Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel

This European Standard specifies the technical delivery conditions for welded tubes, of circular cross section, made from stainless steels, for mechanical and general engineering purposes.

Geschweißte kreisförmige Stahlrohre für den Maschinenbau und allgemeine technische Anwendungen - Technische Lieferbedingungen - Teil 2: Nichtrostende Stähle

Dieser Teil der EN 10296 enthält die technischen Lieferbedingungen für geschweißte Rohre mit kreisförmigem Querschnitt aus nichtrostendem Stahl, die für die Anwendung im Maschinenbau und für allgemeine technische Anwendungen bestimmt sind.

Tubes ronds soudés en acier pour utilisation en mécanique générale et en construction mécanique - Conditions techniques de livraison - Partie 2: Tubes en acier inoxydable

La présente partie de l'EN 10296 spécifie les conditions techniques des tubes soudés de section circulaire en acier inoxydable pour utilisation en mécanique générale et en construction mécanique.

Okrogle varjene jeklene cevi za strojništvo in splošno uporabo v tehniki – Tehnični dobavni pogoji – 2. del: Nerjavna jekla

General Information

• Status: Published
• Publication Date: 06-Dec-2005
• Withdrawal Date: 30-Jan-2006
• ICS: 77.140.75 - Steel pipes and tubes for specific use
• Technical Committee: ECISS/TC 110 - Steel tubes, and iron and steel fittings
• Drafting Committee: ECISS/TC 29/SC 11/WG 1 - Steel tubes for mechanical general engineering purposes
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 03-Dec-2020
• Ref Project: SIST EN 10296-2:2006 - Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel

Relations

• Corrected By: EN 10296-2:2005/AC:2007 - Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
• Effective Date: 22-Dec-2008
• Parent: EN 10294-1:2005 - Hollow bars for machining - Technical delivery conditions - Part 1: Non alloy and alloy steels
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 10296-2:2006
01-marec-2006
Okrogle varjene jeklene cevi za strojništvo in splošno uporabo v tehniki – Tehnični
dobavni pogoji – 2. del: Nerjavna jekla
Welded circular steel tubes for mechanical and general engineering purposes - Technical
delivery conditions - Part 2: Stainless steel
Geschweißte kreisförmige Stahlrohre für den Maschinenbau und allgemeine technische
Anwendungen - Technische Lieferbedingungen - Teil 2: Nichtrostende Stähle
Tubes ronds soudés en acier pour utilisation en mécanique générale et en construction
mécanique - Conditions techniques de livraison - Partie 2: Tubes en acier inoxydable
Ta slovenski standard je istoveten z: EN 10296-2:2005
ICS:
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
SIST EN 10296-2:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 10296-2:2006

---------------------- Page: 2 ----------------------
SIST EN 10296-2:2006
EUROPEAN STANDARD
EN 10296-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2005
ICS 77.140.75

English Version
Welded circular steel tubes for mechanical and general
engineering purposes - Technical delivery conditions - Part 2:
Stainless steel
Tubes ronds soudés en acier pour utilisation en mécanique Geschweißte kreisförmige Stahlrohre für den
générale et en construction mécanique - Conditions Maschinenbau und allgemeine technische Anwendungen -
techniques de livraison - Partie 2: Tubes en acier Technische Lieferbedingungen - Teil 2: Nichtrostende
inoxydable Stähle
This European Standard was approved by CEN on 4 April 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 10296-2:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 10296-2:2006
EN 10296-2:2005 (E)
Contents
Page
Foreword .3
Introduction.4
1 Scope .5
2 Normative references .5
3 Terms and definitions.6
4 Symbols.6
5 Classification and designation .6
6 Information to be supplied by the purchaser.7
7 Manufacturing process.8
8 Requirements .9
9 Inspection and testing .18
10 Sampling.
...

SLOVENSKI STANDARD
SIST EN 10296-2:2006
01-marec-2006
2NURJOHYDUMHQHMHNOHQHFHYL]DVWURMQLãWYRLQVSORãQRXSRUDERYWHKQLNL±7HKQLþQL
GREDYQLSRJRML±GHO1HUMDYQDMHNOD
Welded circular steel tubes for mechanical and general engineering purposes - Technical
delivery conditions - Part 2: Stainless steel
Geschweißte kreisförmige Stahlrohre für den Maschinenbau und allgemeine technische
Anwendungen - Technische Lieferbedingungen - Teil 2: Nichtrostende Stähle
Tubes ronds soudés en acier pour utilisation en mécanique générale et en construction
mécanique - Conditions techniques de livraison - Partie 2: Tubes en acier inoxydable
Ta slovenski standard je istoveten z: EN 10296-2:2005
ICS:
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
SIST EN 10296-2:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 10296-2:2006

---------------------- Page: 2 ----------------------

SIST EN 10296-2:2006
EUROPEAN STANDARD
EN 10296-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2005
ICS 77.140.75

English Version
Welded circular steel tubes for mechanical and general
engineering purposes - Technical delivery conditions - Part 2:
Stainless steel
Tubes ronds soudés en acier pour utilisation en mécanique Geschweißte kreisförmige Stahlrohre für den
générale et en construction mécanique - Conditions Maschinenbau und allgemeine technische Anwendungen -
techniques de livraison - Partie 2: Tubes en acier Technische Lieferbedingungen - Teil 2: Nichtrostende
inoxydable Stähle
This European Standard was approved by CEN on 4 April 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 10296-2:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 10296-2:2006
EN 10296-2:2005 (E)
Contents
Page
Foreword .3
Introduction.4
1 Scope .5
2 Normative references .5
3 Terms and definitions.6
4 Symbols.6
5 Classification and designation .6
6 Information to be supplied by the purchaser.7
7 Manufacturing process.8
8 Requirements .9
9 Inspection and testing .18
10 Sampling.
...