EN 13463-5:2003

Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety "c"

1.1   This European standard specifies the requirements for the design and construction of non-electrical equipment, intended for use in potentially explosive atmospheres, protected by the type of protection Constructional Safety "c".
1.2   This standard supplements the requirements in EN 13463-1, the contents of which also apply in full to equipment constructed in accordance with this standard.
1.3   Equipment complying with the relevant clauses of this standard meet the requirements for the following categories:
Equipment Group I Category M2;
Equipment Group II Category 2G or 2D;
Equipment Group II   Category 1G or 1D;
NOTE   The requirements for Group I, Category M1 equipment, are given in EN 50303 which specifies the requirements for both electrical and non-electrical equipment.
1.4   The type of ignition protection described in the standard can be used either on it's own or in combination with other types of ignition protection to meet the requirements for equipment of Group I, categories M1 and M2 or Group II, categories 1 and 2 depending on the ignition hazard assessment in EN 13463-1.

Nicht-elektrische Geräte für den Einsatz in explosionsgefährdeten Bereichen - Teil 5: Schutz durch Konstruktive Sicherheit "c"

Appareils non électriques destinés à être utilisés en atmosphères explosibles - Partie 5: Protection par sécurité de construction "c"

1.1   Diese Europäische Norm legt die Anforderungen an den Aufbau und die Konstruktion von nichtelektrischen Geräten fest, die in explosionsgefährdeten Bereichen eingesetzt werden sollen und durch die Schutzart Konstruktive Sicherheit �c" geschützt sind.
1.2   Diese Norm ergänzt die Anforderungen von EN 13463-1, deren Inhalt insgesamt auch für Geräte gilt, deren Konstruktion der vorliegenden Norm entspricht.
1.3   Geräte, die den entsprechenden Abschnitten der vorliegenden Norm entsprechen, erfüllen die Anforderungen für die folgenden Kategorien:
¾ Gruppe I, Kategorie M2;
¾ Gruppe II, Kategorie 2G oder 2D;
Gruppe II, Kategorie 1G oder 1D.
ANMERKUNG   Die Anforderungen für die Gruppe I, Geräte der Kategorie M1, sind in EN 50303 enthalten, die die Anforderungen sowohl für elektrische als auch für nichtelektrische Geräte festlegt.
1.4   Um die Anforderungen an Geräte der Gruppe I, Kategorien M1 und M2 oder der Gruppe II, Kategorien 1 und 2 entsprechend der Bewertung der Zündgefahr in EN 13463-1 zu erfüllen, kann die in der Norm beschriebene Zündschutzart entweder einzeln oder in Verbindung mit anderen Zündschutzarten verwendet werden.

Neelektrična oprema za uporabo v potencialno eksplozivnih atmosferah – 5. del: Zaščita s konstrukcijsko varnostjo “c”

General Information

• Status: Withdrawn
• Publication Date: 02-Dec-2003
• Withdrawal Date: 19-Jul-2011
• ICS: 13.230 - Explosion protection
• Technical Committee: CEN/TC 305 - Potentially explosive atmospheres - Explosion prevention and protection
• Drafting Committee: CEN/TC 305/WG 2 - Equipment for use in potentially explosive atmospheres (provisional title)
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 20-Jul-2011
• Completion Date: 20-Jul-2011
• Directive: 94/9/EC - Directive 94/9/EC of the European Parliament and the Council of 23 March 1994 on the approximation of the laws of the Member States concerning equipment and protective systems intended for use in potentially explosive atmospheres
• Mandate: M/BC/CEN/92/46 - Standardization mandate assigned to CEN/CENELEC concerning equipment and protective systems intended for use in potentially explosive atmospheres
• Ref Project: SIST EN 13463-5:2004 - Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety "c"

Relations

• Replaced By: EN 13463-5:2011 - Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c'
• Effective Date: 23-Jul-2011

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety "c"Appareils non électriques destinés a etre utilisés en atmospheres explosibles - Partie 5: Protection par sécurité de construction "c"Nicht-elektrische Geräte für den Einsatz in explosionsgefährdeten Bereichen - Teil 5: Schutz durch Konstruktive Sicherheit "c"13.230Varstvo pred eksplozijoExplosion protectionICS:SIST EN 13463-5:2004enTa slovenski standard je istoveten z:EN 13463-5:200301-februar-2004SIST EN 13463-5:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13463-5December 2003ICS 13.230English versionNon-electrical equipment intended for use in potentiallyexplosive atmospheres - Part 5: Protection by constructionalsafety “c”Appareils non électriques destinés à être utilisés enatmosphères explosibles - Partie 5: Protection par sécuritéde construction “c”Nicht-elektrische Geräte für den Einsatz inexplosionsgefährdeten Bereichen - Teil 5: Schutz durchKonstruktive Sicherheit “c”This European Standard was approved by CEN on 1 September 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13463-5:2003 E

Examples of some of the thought processes and principles used in theconstruction of items of equipment protected by 'Constructional Safety' protection.14Annex B (normative)
Test requirements.21Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or otherprovisions of EU Directives.23Bibliography.29
...