EN 4621:2010
(Main)Aerospace series - Inserts, MJ threads, self-locking, self-broaching keys - Technical specification
Aerospace series - Inserts, MJ threads, self-locking, self-broaching keys - Technical specification
This standard specifies the characteristics, qualification and acceptance requirements for self-locking inserts, self-broaching keys with MJ threads, for aerospace applications.
It is applicable whenever referenced.
Luft- und Raumfahrt - Gewindeeinsätze, MJ-Gewinde, selbstsichernd, mit selbsträumenden Stiften - Technische Lieferbedingungen
Diese Norm legt die Eigenschaften sowie die Qualifikations- und Abnahmeanforderungen an selbstsichernde
Gewindeeinsätze mit MJ-Gewinde mit selbsträumenden Stiften zur Verwendung in der Luft- und Raumfahrt
fest.
Sie ist anzuwenden, wenn auf sie verwiesen wird.
Série aérospatiale - Douilles filetées, à filetages MJ, à freinage interne à clavettes auto-brochantes - Spécification technique
Aeronavtika - Vložki, navoj MJ, samozapiralni, samozagozdni ključ - Tehnična specifikacija
Ta standard določa lastnosti, kvalifikacije in zahteve za odobritev za zamozapiralne vložke, samozagozdne ključe z navoji MJ, za uporabo v aeronavtiki. Velja, kadar je naveden.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VSHFLILNDFLMDLuft- und Raumfahrt - Gewindeeinsätze, MJ-Gewinden, selbstsicherndmit selbsträumenden Stiften - Technische LieferbedingungenSérie aérospatiale - Douilles filetées, à filetages MJ, à freinage interne à clavettes autobrochantes - Spécification techniqueAerospace series - Inserts, MJ threads, self-locking, self-broaching keys - Technical specification49.030.30MaticeNutsICS:Ta slovenski standard je istoveten z:EN 4621:2010SIST EN 4621:2010en01-maj-2010SIST EN 4621:2010SLOVENSKI
STANDARD
SIST EN 4621:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4621
March 2010 ICS 49.030.30 English Version
Aerospace series - Inserts, MJ threads, self-locking, self-broaching keys - Technical specification
Série aérospatiale - Douilles filetées, à filetages MJ, à freinage interne à clavettes auto-brochantes - Spécification technique
Luft- und Raumfahrt - Gewindeeinsätze, MJ-Gewinden, selbstsicherndmit selbsträumenden Stiften - Technische Lieferbedingungen This European Standard was approved by CEN on 9 January 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4621:2010: ESIST EN 4621:2010
EN 4621:2010 (E) 2 Contents Page Foreword . 31Scope . 42Normative references . 43Terms and definitions . 44Quality assurance . 74.1Qualification . 74.2Acceptance . 74.2.1Purpose . 74.2.2Conditions . 74.2.3Responsibility . 74.2.4Inspection and test report . 75Requirements . 7Annex A (normative)
Definition of test block .18Annex B (normative)
Assembly for rotational resistance test .19Annex C (normative)
Axial tensile strength test .21Annex D (normative)
Assembly for reusability test .23Annex E (normative)
"GO" gauge for inspection of the position of the keys .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.