EN ISO 148-3:2008

Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2008)

ISO 148-3:2008 covers the requirements, preparation and methods for qualifying test pieces used for the indirect verification of pendulum impact testing machines in accordance with ISO 148-2.
ISO 148-3:2008 specifies notched test pieces with nominal dimensions identical to those specified in ISO 148-1; however, the tolerances are more stringent.

Metallische Werkstoffe - Kerbschlagbiegeversuch nach Charpy - Teil 3: Vorbereitung und Charakterisierung von Charpy-V-Referenzproben für die indirekte Prüfung der Prüfmaschinen (Pendelschlagwerke) (ISO 148-3:2008)

Dieser Teil von ISO 148 legt Anforderungen, Vorbereitung und Verfahren zum Nachweis der Eignung der Proben für die indirekte Prüfung von Pendelschlagwerken nach ISO 148 2 fest.
Es werden gekerbte Proben mit Nennmaßen festgelegt, die den in ISO 148 1 festgelegten Maßen entsprechen, wobei die Toleranzen jedoch enger sind.
ANMERKUNG 1   Die chemische Zusammensetzung oder/und die Wärmebehandlung wird/werden in Abhängigkeit von der gewünschten Energiestufe variiert.
ANMERKUNG 2   Referenzproben werden auf Referenz Pendelschlagwerken qualifiziert, die in diesem Teil von ISO 148 ebenfalls beschrieben werden.

Matériaux métalliques - Essai de flexion par choc sur éprouvette Charpy - Partie 3: Préparation et caractérisation des éprouvettes Charpy à entaille en V pour la vérification indirecte des machines d'essai mouton-pendule (ISO 148-3:2008)

L'ISO 148-3:2008 couvre les exigences, la préparation et les méthodes de qualification des éprouvettes utilisées pour la vérification indirecte des machines d'essai de flexion par choc (moutons‑pendules) conformément à l'ISO 148-2.
L'ISO 148-3:2008 décrit les éprouvettes à entaille, de dimensions nominales identiques à celles spécifiées dans l'ISO 148-1.

Kovinski materiali - Udarni preskus po Charpyju - 3. del: Priprava in določevanje značilnosti V-zareznih preskušancev po Charpyju za posredno preverjanje udarnih naprav (ISO 148-3:2008)

General Information

• Status: Withdrawn
• Publication Date: 14-Dec-2008
• Withdrawal Date: 22-Nov-2016
• ICS: 77.040.10 - Mechanical testing of metals
• Technical Committee: ECISS/TC 101 - Test methods for steel (other than chemical analysis)
• Drafting Committee: ECISS/TC 101 - Test methods for steel (other than chemical analysis)
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 23-Nov-2016
• Ref Project: SIST EN ISO 148-3:2009 - Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2008)

Relations

• Replaces: EN 10045-2:1992/AC:1993 - Metallic materials - Charpy impact test - Part 2: Verification of the testing machine (pendulum impact)
• Effective Date: 11-Feb-2009
• Replaces: EN 10045-2:1992 - Metallic materials - Charpy impact test - Part 2: Verification of the testing machine (pendulum impact)
• Effective Date: 11-Feb-2009
• Replaced By: EN ISO 148-3:2016 - Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016)
• Effective Date: 30-Nov-2016

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 148-3:2009
01-april-2009
1DGRPHãþD
SIST EN 10045-2:1996
SIST EN 10045-2:1996/AC1:1997
.RYLQVNLPDWHULDOL8GDUQLSUHVNXVSR&KDUS\MXGHO3ULSUDYDLQGRORþHYDQMH
]QDþLOQRVWL9]DUH]QLKSUHVNXãDQFHYSR&KDUS\MX]DSRVUHGQRSUHYHUMDQMHXGDUQLK
QDSUDY,62
Metallic materials - Charpy pendulum impact test - Part 3: Preparation and
characterization of Charpy V-notch test pieces for indirect verification of pendulum
impact machines (ISO 148-3:2008)
Metallische Werkstoffe - Kerbschlagbiegeversuch nach Charpy - Teil 3: Vorbereitung und
Charakterisierung von Charpy-V-Referenzproben für die Prüfung der Prüfmaschinen
(Pendelschlagwerke) (ISO 148-3:2008)
Matériaux métalliques - Essai de flexion par choc sur éprouvette Charpy - Partie 3:
Préparation et caractérisation des éprouvettes Charpy a entaille en V pour la vérification
indirecte des machines d'essai (mouton-pendule) (ISO 148-3:2008)
Ta slovenski standard je istoveten z: EN ISO 148-3:2008
ICS:
77.040.10 Mehansko preskušanje kovin Mechanical testing of metals
SIST EN ISO 148-3:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 148-3:2009

---------------------- Page: 2 ----------------------

SIST EN ISO 148-3:2009
EUROPEAN STANDARD
EN ISO 148-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2008
ICS 77.040.10

English Version
Metallic materials - Charpy pendulum impact test - Part 3:
Preparation and characterization of Charpy V-notch test pieces
for indirect verification of pendulum impact machines (ISO 148-
3:2008)
Matériaux métalliques - Essai de flexion par choc sur Metallische Werkstoffe - Kerbschlagbiegeversuch nach
éprouvette Charpy - Partie 3: Préparation et caractérisation Charpy - Teil 3: Vorbereitung und Charakterisierung von
des éprouvettes Charpy à entaille en V pour la vérification Charpy-V-Referenzproben für die indirekte Prüfung der
indirecte des machines d'essai mouton-pendule (ISO 148- Prüfmaschinen (Pendelschlagwerke) (ISO 148-3:2008)
3:2008)
This European Standard was approved by CEN on 19 November 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 148-3:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 148-3:2009
EN ISO 148-3:2008 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 148-3:2009
EN ISO 148-3:2008 (E)
Foreword
This document (EN ISO 148-3:2008) has been prepared by Technical Committee ISO/TC 164 "Mechanical
testing of metals" in collaboration with Technical Committee ECISS/TC 1 "Steel - Mechanical testing" the
secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2009, and conflicting national standards shall be withdrawn at
the latest by June 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania
...