EN ISO 29468:2022
(Main)Thermal insulating products for building applications - Determination of flatness (ISO 29468:2022)
Thermal insulating products for building applications - Determination of flatness (ISO 29468:2022)
This document specifies the equipment and procedures for determining the deviation from flatness for full-size products. It is applicable to thermal insulating products.
Wärmedämmstoffe für das Bauwesen - Bestimmung der Ebenheit (ISO 29468:2022)
Dieses Dokument legt die Prüfeinrichtungen und Verfahren zur Bestimmung der Abweichung von der Ebenheit an Produkten in Liefermaßen fest. Es gilt für Wärmedämmstoffe.
Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la planéité (ISO 29468:2022)
Le présent document spécifie l’équipement et les modes opératoires permettant de déterminer l’écart de planéité des produits en vraies dimensions. Il s’applique aux produits isolants thermiques.
Toplotno izolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje ploskosti (ISO 29468:2022)
Ta evropski standard določa opremo in postopke za ugotavljanje odklona od ploskosti za proizvode naravne velikosti. Uporablja se za toplotnoizolacijske proizvode.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 29468:2022
01-november-2022
Nadomešča:
SIST EN 825:2013
Toplotno izolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje ploskosti
(ISO 29468:2022)
Thermal insulating products for building applications - Determination of flatness (ISO
29468:2022)
Wärmedämmstoffe für das Bauwesen - Bestimmung der Ebenheit (ISO 29468:2022)
Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la
planéité (ISO 29468:2022)
Ta slovenski standard je istoveten z: EN ISO 29468:2022
ICS:
91.100.60 Materiali za toplotno in Thermal and sound insulating
zvočno izolacijo materials
SIST EN ISO 29468:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 29468:2022
---------------------- Page: 2 ----------------------
SIST EN ISO 29468:2022
EN ISO 29468
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2022
EUROPÄISCHE NORM
ICS 91.100.60 Supersedes EN 825:2013
English Version
Thermal insulating products for building applications -
Determination of flatness (ISO 29468:2022)
Produits isolants thermiques destinés aux applications Wärmedämmstoffe für das Bauwesen - Bestimmung
du bâtiment - Détermination de la planéité (ISO der Ebenheit (ISO 29468:2022)
29468:2022)
This European Standard was approved by CEN on 7 August 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 29468:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 29468:2022
EN ISO 29468:2022 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 29468:2022
EN ISO 29468:2022 (E)
European foreword
This document (EN ISO 29468:2022) has been prepared by Technical Committee ISO/TC 163/SC 1
"Test and measurement methods" in collaboration with Technical Committee CEN/TC 88 “Thermal
insulating materials and products” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2023, and conflicting national standards shall
be withdrawn at the latest by September 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 825:2013.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 29468:2022 has been approved by CEN as EN ISO 29468:2022 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 29468:2022
---------------------- Page: 6 ----------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.