EN 13749:2021/prA1

Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames

This document specifies the method to be followed to achieve a satisfactory design of bogie frames and includes design procedures, assessment methods, verification and manufacturing quality requirements. It is limited to the structural requirements of bogie frames including bolsters and axlebox housings. For the purpose of this document, these terms are taken to include all functional attachments, e.g. damper brackets.

Bahnanwendungen - Radsätze und Drehgestelle - Festlegungsverfahren für Festigkeitsanforderungen an Drehgestellrahmen

Applications ferroviaires - Essieux montés et bogies - Méthode pour spécifier les exigences en matière de résistance des structures de châssis de bogie

Železniške naprave - Kolesne dvojice in podstavni vozički - Metoda za specificiranje konstrukcijskih zahtev okvirjev podstavnih vozičkov - Dopolnilo A1

General Information

• Status: Not Published
• Publication Date: 06-Nov-2023
• ICS: 45.040 - Materials and components for railway engineering
• Technical Committee: CEN/TC 256 - Railway applications
• Drafting Committee: CEN/TC 256/SC 2/WG 13 - Bogie frames
• Directive: 2016/797/EU - Directive (EU) 2016/797 of the European Parliament and of the Council of 11 May 2016 on the interoperability of the rail system within the European Union (Text with EEA relevance)
• Mandate: M/483 - Mandate for programming and standardisation addressed to the European standardisation bodies under directive 2008/57/EC in the field of the interoperability of the rail system within the European Union
• Mandate: M/591 - Standardisation request to the European Committee for Standardisation and the European Committee for Electrotechnical Standardisation as regards railway products in support of Directive (EU) 2016/797
• Ref Project: SIST EN 13749:2021/oprA1:2022 - Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames

Relations

• Merged Into: EN 13749:2021+A1:2023 - Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames
• Effective Date: 04-Oct-2023
• Amends: EN 13749:2021 - Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames
• Effective Date: 29-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2022
Železniške naprave - Kolesne dvojice in podstavni vozički - Metoda za
specificiranje konstrukcijskih zahtev okvirjev podstavnih vozičkov - Dopolnilo A1
Railway applications - Wheelsets and bogies - Method of specifying the structural
requirements of bogie frames
Bahnanwendungen - Radsätze und Drehgestelle - Festlegungsverfahren für
Festigkeitsanforderungen an Drehgestellrahmen
Applications ferroviaires - Essieux montés et bogies - Méthode pour spécifier les
exigences en matière de résistance des structures de châssis de bogie
Ta slovenski standard je istoveten z: EN 13749:2021/prA1
ICS:
45.040 Materiali in deli za železniško Materials and components
tehniko for railway engineering
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
EN 13749:2021
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
September 2022
ICS 45.040
English Version
Railway applications - Wheelsets and bogies - Method of
specifying the structural requirements of bogie frames
Applications ferroviaires - Essieux montés et bogies - Bahnanwendungen - Radsätze und Drehgestelle -
Méthode pour spécifier les exigences en matière de Festlegungsverfahren für Festigkeitsanforderungen an
résistance des structures de châssis de bogie Drehgestellrahmen
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 256.

This draft amendment A1, if approved, will modify the European Standard EN 13749:2021. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the
...