iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12493:2013+A1:2014/AC:2015

(Corrigendum)

LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture

LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture

CEN/TC mistake: correction to Formula (D.11)

Flüssiggas-Geräte und Ausrüstungsteile - Geschweißte Druckbehälter aus Stahl für Straßentankwagen für Flüssiggas (LPG) - Auslegung und Herstellung

Équipements pour GPL et leurs accessoires - Réservoirs sous pression en acier soudés des camions-citernes pour GPL - Conception et construction

Oprema in pribor za utekočinjeni naftni plin (UNP) - Varjene jeklene tlačne posode cestnih cistern za utekočinjeni naftni plin (UNP) - Konstruiranje in izdelava

General Information

Status
Withdrawn
Publication Date
30-Jun-2015
Withdrawal Date
26-Jun-2018
ICS
23.020.30 - Pressure vessels, gas cylinders
23.020.35 - Gas cylinders
Technical Committee
CEN/TC 286 - Liquefied petroleum gas equipment and accessories
Drafting Committee
CEN/TC 286/WG 1 - Design and manufacture of LPG pressure vessels
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
27-Jun-2018
Directive
2008/68/EC - Directve 2008/68/EC of the European Parliament and of the council of 24 September 2008 on the inland transport of the dangerous goods
Mandate
M/086 - Mandate to CEN for standardization in the field of transport of dangerous goods
Ref Project
SIST EN 12493:2013+A1:2014/AC:2015 - LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture

Relations

Merged Into
EN 12493:2013+A2:2018 - LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture
Effective Date
19-Jan-2023
Corrects
EN 12493:2013+A1:2014 - LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture
Effective Date
24-Jun-2015

Buy Standard

EN 12493:2013+A1:2014/AC:2015EN 12493:2013+A1:2014/AC:2015
PreviousNext
Corrigendum
EN 12493:2013+A1:2014/AC:2015
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Flüssiggas-Geräte und Ausrüstungsteile - Geschweißte Druckbehälter aus Stahl für Straßentankwagen für Flüssiggas (LPG) - Auslegung und HerstellungÉquipements pour GPL et leurs accessoires - Réservoirs sous pression en acier soudés des camions-citernes pour GPL - Conception et constructionLPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture43.080.10Tovornjaki in priklopnikiTrucks and trailers23.020.30MHNOHQNHPressure vessels, gas cylindersICS:Ta slovenski standard je istoveten z:EN 12493:2013+A1:2014/AC:2015SIST EN 12493:2013+A1:2014/AC:2015en,fr,de01-september-2015SIST EN 12493:2013+A1:2014/AC:2015SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12493:2013+A1:2014/AC
July 2015
Juillet 2015
Juli 2015 ICS 23.020.30 English version Version Française Deutsche Fassung
LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture
Équipements pour GPL et leurs accessoires - Réservoirs sous pression en acier soudés des camions-citernes pour GPL - Conception et construction
Flüssiggas-Geräte und Ausrüstungsteile - Geschweißte Druckbehälter aus St
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 12493:2020(Main)
LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture
SIST EN 12493:2021

This document specifies minimum requirements for materials, design, construction and workmanship procedures, and tests for welded LPG road tanker pressure vessels and their welded attachments manufactured from carbon, carbon/manganese and micro alloy steels.
There is no upper size limit as this is determined by the gross vehicle weight limitation.
This document does not cover pressure vessels for pressure vessel containers.
NOTE 1 In the context of this document, the term "road tanker" is understood to mean "fixed tanks" and "demountable tanks" as defined in ADR.
NOTE 2 The equipment for the pressure vessels and the inspection and testing after assembly is covered by EN 12252 and EN 14334, respectively.
NOTE 3 The design type of the road tanker is subject to approval by the competent authority, as required by ADR.
NOTE 4 This document is intended for LPG only; however, for other liquefied gases see EN 14025.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12807:2019(Main)
LPG equipment and accessories - Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG) - Design and construction
SIST EN 12807:2019

This document specifies the minimum requirements for the design, construction and testing during manufacture of transportable refillable brazed steel Liquefied Petroleum Gas (LPG) cylinders, of water capacity from 0,5 l up to and including 15 l, exposed to ambient temperatures.
This document applies only to cylinders having a circular cross-section without any longitudinal joint.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13952:2017(Main)
LPG equipment and accessories - Filling operations for LPG cylinders
SIST EN 13952:2018

This European Standard specifies the requirements for the operation of a cylinder filling plant to ensure that filling of transportable refillable LPG cylinders is carried out in a controlled and safe manner.
This document is applicable to the filling of cylinders complying with RID/ADR [10][11] (including pi marked cylinders) and also to existing non RID/ADR cylinder populations.
This document is applicable to the following:
-   welded and brazed steel LPG cylinders with a specified minimum wall thickness (see EN 1442 [1] and EN 12807 [2] or an equivalent standard);
-   welded steel LPG cylinders without specified minimum wall thickness (see EN 14140 [4] or an equivalent standard);
-   welded aluminium LPG cylinders (see EN 13110 [3] or an equivalent standard);
-   composite LPG cylinders (see EN 14427 [5] or an equivalent standard); and
-   over-moulded cylinders (OMC).
This document does not cover the requirements for filling LPG cylinders that are designed and equipped for filling by the user.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    10 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1442:2017(Main)
LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction
SIST EN 1442:2017

This European Standard specifies the minimum requirements for the design, construction and testing during manufacture of transportable refillable welded steel Liquefied Petroleum Gas (LPG) cylinders, of water capacity from 0,5 l up to and including 150 l.
This European Standard applies only to cylinders having a circular cross-section.
Cylinders designed and constructed to the requirements of this European Standard may be over-moulded; additional requirements for these cylinders set out in Annex B.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    53 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14140:2014/AC:2015(Corrigendum)
LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and construction
SIST EN 14140:2015/AC:2015

This European Standard specifies the minimum requirements for the design, construction and testing during manufacture of transportable refillable welded steel Liquefied Petroleum Gas (LPG) cylinders, of water capacity from 0,5 l up to and including 150 l, exposed to temperatures of -20 °C to +65 °C. It allows alternative design and construction methods to those required in EN 1442, including coated cylinders, over-moulded cylinders and cylinders for hot air balloons.
This European Standard applies only to pressure receptacles with a circular cross-section.
This European Standard does not include the equipping of the cylinders with valves and other service equipment.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 16765:2015(Main)
LPG equipment and accessories - Environmental considerations for CEN/TC 286 standards
SIST-TS CEN/TS 16765:2015

Protection of the environment needs to be considered during the total life-cycle of a particular product, e.g. impact on the environment including expenditure of energy during all phases of its life-cycle, from mining of raw materials, production, testing, packaging, distribution, maintenance and use, end-of-life disposal and recycling of materials, etc.
This Technical Specification provides information on the environmental aspects of equipment and accessories produced for the LPG industry. The following is addressed:
a)   design;
b)   manufacture;
c)   packaging;
d)   use and operation;
e)   disposal.

  • Technical specification
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14140:2014(Main)
LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and construction
SIST EN 14140:2015

This European Standard specifies the minimum requirements for the design, construction and testing during manufacture of transportable refillable welded steel Liquefied Petroleum Gas (LPG) cylinders, of water capacity from 0,5 l up to and including 150 l, exposed to temperatures of -20 °C to +65 °C. It allows alternative design and construction methods to those required in EN 1442, including coated cylinders, over-moulded cylinders and cylinders for hot air balloons.
This European Standard applies only to pressure receptacles with a circular cross-section.
This European Standard does not include the equipping of the cylinders with valves and other service equipment.

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14893:2014(Main)
LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres
SIST EN 14893:2014

This European Standard specifies the minimum requirements for the material, design, construction, workmanship, equipping, inspection and testing at manufacture of transportable, refillable welded steel pressure drums of volumes over 150 l up to and including 1 000 l for Liquefied Petroleum Gases (LPG).
Vertical and horizontal cylindrical receptacles are covered.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14570:2014(Main)
LPG equipment and accessories - Equipping of overground and underground LPG vessels
SIST EN 14570:2014

This European Standard specifies requirements for the equipping of LPG pressure vessels, overground and underground, with a volume not greater than 13 m3 manufactured in accordance with EN 12542 or equivalent and have been hydraulically tested.
The equipment covered by this European Standard is directly mounted onto the pressure vessel connections.
This European Standard excludes the equipping of depot storage vessels and refrigerated storage vessels.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12816:2010(Main)
LPG equipment and accessories - Transportable refillable LPG cylinders - Disposal
SIST EN 12816:2011

This European Standard specifies methods for the safe gas freeing and disposal of refillable LPG cylinders manufactured from steel, composite materials and aluminium, of water capacity 0,5 litres up to and including 150 litres.
This European Standard is applicable to the following:
-   welded and brazed steel LPG cylinders with a specified minimum wall thickness (see EN 1442 and EN 12807 or equivalent standard);
-   welded steel LPG cylinders without specified minimum wall thickness (see EN 14140 or equivalent standard);
-   welded aluminium LPG cylinders (see EN 13110 or equivalent standard);
-   composite LPG cylinders (see EN 14427 or equivalent standard).
This European Standard is intended to be applied to cylinders complying with ADR (including pi marked cylinders) and also to existing non ADR cylinder populations.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day