EN 4302:2008

Aerospace series - Open ring insert tool, square drive

This standard specifies the characteristics of open ring insert tools for splined nuts, metric for aerospace applications.

Luft- und Raumfahrt - Ringeinsteckwerkzeug, offen, verzahnt

Diese Norm legt die Eigenschaften von offenen Ringeinsteckwerkzeugen für Vielzahnmuttern, kurze Form, metrisch, fest, die für Anwendungen in der Luft- und Raumfahrt bestimmt sind.

Série aérospatiale - Embouts cannelés, à tuyauter, à carré conducteur axial

Aeronavtika - Orodje za vstavljanje obročka, odprto, ozobljeno

General Information

• Status: Published
• Publication Date: 25-Mar-2008
• Withdrawal Date: 29-Sep-2008
• ICS: 49.030.99 - Other fasteners
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3 - Mechanical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Jun-2017
• Ref Project: SIST EN 4302:2008 - Aerospace series - Open ring insert tool, square drive

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Open ring insert tool, square driveSérie aérospatiale - Embouts cannelés, à tuyauter, à carré conducteur axialLuft- und Raumfahrt - Ringeinsteckwerkzeug, offen, verzahnt49.030.99Drugi vezni elementiOther fastenersICS:SIST EN 4302:2008enTa slovenski standard je istoveten z:EN 4302:200801-junij-2008SIST EN 4302:2008SLOVENSKI
STANDARD







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 4302March 2008ICS 49.030.99 English VersionAerospace series - Open ring insert tool, square driveSérie aérospatiale - Embouts cannelés, à tuyauter, à carréconducteur axialLuft- und Raumfahrt - Ringeinsteckwerkzeug, offen,verzahntThis European Standard was approved by CEN on 26 August 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 4302:2008: E



EN 4302:2008 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Required characteristics.4 3.1 Configuration - Dimensions - Tolerances.4 3.2 Material.4 3.3 Hardness.4 3.4 Surface treatment.4 4 Designation.7 5 Marking.7 6 Technical specification.7



EN 4302:2008 (E) 3 Foreword This document (EN 4302:2008) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2008, and conflicting national standards shall be withdrawn at the latest by September 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lat
...