CEN/TS 17733:2022

Soil improvers and growing media - Sampling and sample preparation

This document specifies references to methods for sampling of soil improvers and growing media and sample preparation of soil improvers and growing media for subsequent determination of quality and quantity.
This document is applicable to EU fertilizing products classified as PFC 3, PFC 4 and PFC 7 as long as the main function of the EU fertilizing product is classified as PFC 3 or PFC 4, as specified in the Regulation (EU) 2019/1009 [2].

Bodenverbesserungsmittel und Kultursubstrate - Probenahme und Probenvorbereitung

In diesem Dokument sind Verweisungen auf Verfahren der Probenahme von Bodenverbesserungsmitteln und Kultursubstraten sowie der Probenvorbereitung von Bodenverbesserungsmitteln und Kultursubstraten für die anschließende Bestimmung von Qualität und Menge aufgeführt.
Dieses Dokument ist anzuwenden für EU Düngeprodukte der Kategorien PFC 3, PFC 4 und PFC 7, vorausgesetzt, die Hauptfunktion des EU Düngeprodukts entspricht der Kategorie PFC 3 oder PFC 4 aus Verordnung (EU) 2019/1009 [2].

Amendements du sol et supports de culture - Échantillonnage et préparation de l'échantillon

Le présent document spécifie les références aux méthodes d'échantillonnage et de préparation de l'échantillon des amendements du sol et des supports de culture en vue d'une détermination ultérieure de la qualité et de la quantité.
Ce document est applicable aux fertilisants UE classés comme PFC 3, PFC 4 et PFC 7 tant que la fonction principale du fertilisant UE est classée comme PFC 3 ou PFC 4, comme spécifié dans le règlement (UE) 2019/1009 [2].

Izboljševalci tal in rastni substrati - Vzorčenje in priprava vzorcev

Ta dokument se sklicuje na metode za vzorčenje izboljševalcev tal in rastnih substratov ter pripravo vzorcev izboljševalcev tal in rastnih substratov za poznejše določanje kakovosti in količine.
Ta dokument se uporablja za sredstva za gnojenje v EU, razvrščena kot PFC 3, PFC 4 in PFC 7, pod pogojem, da je glavno delovanje sredstva za gnojenje v EU razvrščeno kot PFC 3 ali PFC 4, kot je določeno v Uredbi (EU) 2019/1009 [2].

General Information

• Status: Published
• Publication Date: 08-Feb-2022
• ICS: 65.080 - Fertilizers
• Technical Committee: CEN/TC 223 - Soil improvers and growing media
• Drafting Committee: CEN/TC 223/WG 6 - Harmonization
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 09-Feb-2022
• Due Date: 05-Nov-2022
• Completion Date: 09-Feb-2022
• Directive: 2019/1009 - Regulation (EU) 2019/1009 of the European Parliament and of the Council of 5 June 2019 laying down rules on the making available on the market of EU fertilising products and amending Regulations (EC) No 1069/2009 and (EC) No 1107/2009 and repealing Regulation (EC) No 2003/2003
• Mandate: M/564 - Fertilising products in support of Regulation (EU) 2019/1009
• Ref Project: SIST-TS CEN/TS 17733:2022 - Soil improvers and growing media - Sampling and sample preparation

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 17733:2022
01-oktober-2022
Izboljševalci tal in rastni substrati - Vzorčenje in priprava vzorcev
Soil improvers and growing media - Sampling and sample preparation
Bodenverbesserungsmittel und Kultursubstrate - Probenahme und Probenvorbereitung
Amendements du sol et supports de culture - Échantillonnage et préparation de
l'échantillon
Ta slovenski standard je istoveten z: CEN/TS 17733:2022
ICS:
65.080 Gnojila Fertilizers
SIST-TS CEN/TS 17733:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 17733:2022

---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 17733:2022


CEN/TS 17733
TECHNICAL SPECIFICATION

SPÉCIFICATION TECHNIQUE

February 2022
TECHNISCHE SPEZIFIKATION
ICS 65.080
English Version

Soil improvers and growing media - Sampling and sample
preparation
Amendements du sol et supports de culture - Bodenverbesserungsmittel und Kultursubstrate -
Échantillonnage et préparation de l'échantillon Probenahme
This Technical Specification (CEN/TS) was approved by CEN on 3 January 2022 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 17733:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 17733:2022
CEN/TS 17733:2022 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Sampling and sample preparation . 5
Bibliography . 6

2

---------------------- Page: 4 ----------------------
SIST-TS CEN/TS 17733:2022
CEN/TS 17733:2022 (E)
European foreword
This document (CEN/TS 17733:2022) has been prepared by Technical Committee CEN/TC 223 “Soil
improvers and growing media”, the secretariat of which is held by NEN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,
...