iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 2584:1992

(Main)

Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series - Elevated loads at ambient temperature - Dimensions and loads

Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series - Elevated loads at ambient temperature - Dimensions and loads

This standard specifies the characteristics of spherical bearings in corrosion resisting steel, with self-lubricating liner, narrow series, for elevated loads at ambient temperature. They are intended for use in fixed or moving parts of the aircraft structure and control mechanisms. They shall be used in the temperature range -55° to 163°C.

Luft- und Raumfahrt - Gelenklager aus korrosionsbeständigem Stahl mit selbstschmierender Beschichtung - Schmale Reihe - Hohe Belastungen bei Raumtemperatur - Maße und Belastungen

Diese Norm legt die Eigenschaften von Gelenklagern aus korrosionsbeständigem Stahl mit selbstschmierender Beschichtung, schmale Reihe, für hohe Belastungen bei Raumtemperatur fest. Sie sind für die Verwendung in starren oder beweglichen Flugwerkteilen und deren Betätigungseinrichtungen vorgesehen. Sie sind in dem Temperaturbereich von -55° bis 163°C zu verwenden.

Série aérospatiale - Rotules en acier résistant à la corrosion à garniture autolubrifiante - Série étroite à charge élevée à température ambiante - Dimensions et charges

La présente norme spécifie les caractéristiques des rotules en acier résistant à la corrosion à garniture autolubrifiante, série étroite, à charge élevée à température ambiante. Elles sont destinées à être utlisées dans les éléments fixes ou mobiles de la structure des aéronefs et de leurs mécanismes de commande. Elles doivent être utilisées dans l'intervalle de températures de -55°C à 163°C.

Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series - Elevated loads at ambient temperature - Dimensions and loads

General Information

Status
Withdrawn
Publication Date
11-May-1992
Withdrawal Date
23-Oct-2001
ICS
49.035 - Components for aerospace construction
Technical Committee
ASD/MECH - Mechanical
Drafting Committee
ASD/MECH - Mechanical
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
24-Oct-2001
Completion Date
24-Oct-2001
Ref Project
SIST EN 2584:2001 - Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series - Elevated loads at ambient temperature - Dimensions and loads

Relations

Replaced By
EN 2584:2001 - Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series - Elevated load at ambient temperature - Dimensions and loads
Effective Date
22-Dec-2008

Buy Standard

EN 2584:2001EN 2584:2001
PreviousNext
Standard
EN 2584:2001
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series - Elevated loads at ambient temperature - Dimensions and loadsLuft- und Raumfahrt - Gelenklager aus korrosionsbeständigem Stahl mit selbstschmierender Beschichtung - Schmale Reihe - Hohe Belastungen bei Raumtemperatur - Maße und BelastungenSérie aérospatiale - Rotules en acier résistant a la corrosion a garniture autolubrifiante - Série étroite a charge élev
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 4880:2023(Main)
Aerospace series - General technical specification for standard parts
kSIST FprEN 4880:2022
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4708-203:2022(Main)
Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 203: polyvinylidene fluoride (PVDF) Identification sleeves - Operating Temperature range -55ºC to 225ºC - Product Standard
SIST EN 4708-203:2023

This document specifies the required characteristics for heat-shrinkable semi rigid polyvinylidene identification sleeves for use in aircraft electrical systems at operating temperatures between -55 °C and 225 °C.
This specification is for the characterisation of Identification sleeves only.
This sleeving is a semi rigid tough product and is suitable for use where high temperatures and extreme fluid resistance properties are required.
It is available with a shrink ratio of 2:1.
The product is normally supplied with internal diameters up to 38 mm
The standard colours are white, black or yellow
For use at temperatures above 200 °C black with white or silver ink is recommended
Sizes or colours other than those specifically listed in this standard may be available. These items shall be considered to comply with this document if they comply with the property requirements listed in tables 2 and 3 except for dimensions and mass.
As the sleeving to be tested is a printed article the complete system is to be recorded as part of the evaluation. The sleeve will only be considered as meeting the requirements of this specification if printed with the printer, ribbon/inks and settings referenced within the test report.
Mark adherence and print permanence are determined in this document using method EN 6059-407.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4708-201:2022(Main)
Aerospace series - Sleeves, heat-shrinkable, for binding, insulation and identification - Part 201: Polyolefin identification sleeves - Operating Temperature range -55 °C to 135 °C - Product standard
SIST EN 4708-201:2023

This document specifies the required characteristics for heat-shrinkable polyolefin identification
sleeving for use in aircraft electrical systems at operating temperatures between −55 °C and 135 °C.
This specification is for the characterisation of identification sleeves only.
This sleeving is flexible and flame retarded, and is available with 2:1 and 3:1 shrink ratios.
The product is normally supplied with internal diameters up to 57 mm.
The standard colours are white or yellow.
Sizes or colours other than those specifically listed in this standard may be available. These items are
considered to comply with this document if they comply with the property requirements listed in tables 3
and 4 except for dimensions and mass.
As the sleeving to be tested is a printed article the complete system is to be recorded as part of the
evaluation. The sleeve will only be considered as meeting the requirements of this document if printed
with the printer, ribbon, inks, and settings referenced within the test report.
Mark adherence and print permanence are determined in this document using method EN 6059-407.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4841-2:2022(Main)
Aerospace series - Shock mount with bushes - Part 2: Technical overview
SIST EN 4841-2:2022

This document specifies the dimensions, masses, the tolerances and the required characteristics of shock mounts with bushes for aerospace interior application and without contamination by phosphate-ester hydraulic fluids.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4841-1:2022(Main)
Aerospace series - Shock mount with bushes - Part 1: Technical specification
SIST EN 4841-1:2022

This document specifies the required characteristics, inspection and test methods, qualification and acceptance conditions for shock mounts with bushes, designed to withstand static and dynamic loads possible for aerospace interior applications in the temperature range from -55 °C to 85 °C.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 17603-32-24:2022(Main)
Space engineering - Buckling of structures
SIST-TP CEN/TR 17603-32-24:2022

This document recommends engineering practices for European programs and projects. It may be cited in contracts and program documents as a reference for guidance to meet specific program/project needs and constraints.
The target users of this handbook are engineers involved in design, analysis and verification of launchers and spacecraft in relation to structural stability issues. The current know‐how is documented in this handbook in order to make this expertise available to all European developers of space systems.
It is a guidelines document; therefore it includes advisory information rather than requirements.

  • Technical report
    462 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 17603-32-26:2022(Main)
Space engineering - Spacecraft mechanical loads analysis handbook
SIST-TP CEN/TR 17603-32-26:2022

This document recommends engineering practices for European programs and projects. It may be cited in contracts and program documents as a reference for guidance to meet specific program/project needs and constraints.
The target users of this handbook are engineers involved in design, analysis and verification of spacecraft and payloads in relation to general structural loads analysis issues. The current know‐how is documented in this handbook in order to make this expertise available to all European developers of space systems.
It is a guidelines document; therefore it includes advisory information rather than requirements.

  • Technical report
    502 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 17603-32-25:2022(Main)
Space engineering - Mechanical shock design and verification handbook
SIST-TP CEN/TR 17603-32-25:2022

The intended users of the “Mechanical shock design and verification handbook” are engineers involved in design, analysis and verification in relation to shock environment in spacecraft. The current know-how relevant to mechanical shock design and verification is documented in this handbook in order to make this expertise available to all European spacecraft and payload developers.
The handbook provides adequate guidelines for shock design and verification; therefore it includes advisory information, recommendations and good practices, rather than requirements.
The handbook covers the shock in its globally, from the derivation of shock input to equipment and sub-systems inside a satellite structure, until its verification to ensure a successful qualification, and including its consequences on equipment and sub-systems. However the following aspects are not treated herein:
- No internal launcher shock is treated in the frame of this handbook even if some aspects are common to those presented hereafter. They are just considered as a shock source (after propagation in the launcher structure) at launcher/spacecraft interface.
- Shocks due to fall of structure or equipment are not taken into account as they are not in the frame of normal development of a spacecraft.

  • Technical report
    540 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 2755:2021(Main)
Aerospace series - Bearing, spherical, plain in corrosion resisting steel with self-lubricating liner - Elevated load at ambient temperature - Technical specification
SIST EN 2755:2022

This document specifies the required characteristics, inspection and test methods, qualification and acceptance conditions for a spherical plain bearing in corrosion resisting steel, with self-lubricating liner, for elevated loads at ambient temperature intended for use in fixed or moving parts of the aircraft structure and control mechanisms.
This document applies whenever referenced.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4614:2021(Main)
Aerospace series - Spherical plain bearing in corrosion resisting steel with self-lubricating liner, wide series - Dimensions and loads - Inch series
SIST EN 4614:2021

This document specifies the characteristics of a bearing, spherical plain in corrosion resisting steel with self-lubricating liner, wide series for aerospace applications.
These bearings are not intended for use of moving parts especially for control mechanism and operating system. They shall be used in the temperature range -55 °C to 163 °C.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day