EN ISO 8325:2004

Dentistry - Test methods for rotary instruments (ISO 8325:2004)

ISO 8325:2004 specifies methods for measuring the dimensional characteristics, neck strength and surface roughness of dental rotary instruments, such as burs, cutters, polishers, diamond and abrasive instruments.
ISO 8325:2004 does not provide test methods for the characteristics of materials used for dental rotary instruments.
NOTE For testing of these characteristics, see the respective product standards.
ISO 8325:2004 is not applicable to dental root-canal instruments (see ISO 3630-1).

Zahnheilkunde - Prüfverfahren für rotierende Instrumente (ISO 8325:2004)

In der vorliegenden Internationalen Norm werden Prüfverfahren für rotierende Dentalinstrumente festgelegt, wie zum Beispiel Bohr-, Schneid-, Polier-, Diamantschleif- und Schleifinstrumente. In den entsprechenden Produktnormen für rotierende Dentalinstrumente wird auf die in dieser Internationalen Norm festgelegten Prüfverfahren verwiesen.
Prüfverfahren der Eigenschaften der für rotierende Dentalinstrumente verwendeten Materialien sind nicht Bestandteil dieser Internationalen Norm. Zur Prüfung dieser Eigenschaften sollten die entsprechenden Produktnormen einbezogen werden.
Diese Internationale Norm enthält keine Prüfverfahren für zahnärztliche Wurzelkanalinstrumente. Zur Prüfung dieser Instrumente wird auf ISO 3630-1 verwiesen.

Art dentaire - Méthodes d'essai pour instruments rotatifs (ISO 8325:2004)

L'ISO 8325:2004 spécifie les méthodes d'essai relatives aux instruments dentaires rotatifs comme les fraises, les fraises techniques, les polissoirs et les instruments diamantés et abrasifs.
L'ISO 8325:2004 ne traite pas des méthodes d'essai relatives aux caractéristiques des matériaux utilisés pour les instruments dentaires rotatifs.
NOTE En ce qui concerne les essais relatifs à ces caractéristiques, voir les normes de produit respectives.
L'ISO 8325:2004 n'est pas applicable aux méthodes d'essai relatives aux instruments pour canaux radiculaires (voir l'ISO 3630-1).

Zobozdravstvo - Preskusne metode za vrtilne instrumente (ISO 8325:2004)

General Information

• Status: Withdrawn
• Publication Date: 14-Sep-2004
• Withdrawal Date: 28-Mar-2023
• ICS: 11.060.20 - Dental equipment
• Technical Committee: CEN/TC 55 - Dentistry
• Drafting Committee: CEN/TC 55 - Dentistry
• Ref Project: SIST EN ISO 8325:2005 - Dentistry - Test methods for rotary instruments (ISO 8325:2004)

Relations

• Replaces: EN 28325:1990 - Dentistry - Dental rotary instruments - Test methods (ISO 8325:1985)
• Effective Date: 22-Dec-2008
• Replaces: EN 28325:1990/AC1:1990 - Dentistry - Dental rotary instruments - Test methods
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 8325:2023 - Dentistry - Test methods for rotary instruments (ISO 8325:2023)
• Effective Date: 19-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Zobozdravstvo - Preskusne metode za vrtilne instrumente (ISO 8325:2004)Zahnheilkunde - Prüfverfahren für rotierende Instrumente (ISO 8325:2004)Art dentaire - Méthodes d'essai pour instruments rotatifs (ISO 8325:2004)Dentistry - Test methods for rotary instruments (ISO 8325:2004)11.060.25Dental instrumentsICS:Ta slovenski standard je istoveten z:EN ISO 8325:2004SIST EN ISO 8325:2005en01-marec-2005SIST EN ISO 8325:2005SLOVENSKI
STANDARDSIST EN 28325:2000/AC1:2000SIST EN 28325:20001DGRPHãþD



SIST EN ISO 8325:2005



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 8325September 2004ICS 11.060.20Supersedes EN 28325:1990
English versionDentistry - Test methods for rotary instruments (ISO 8325:2004)Art dentaire - Méthodes d'essai pour instruments rotatifs(ISO 8325:2004)Zahnheilkunde - Prüfverfahren für rotierende Instrumente(ISO 8325:2004)This European Standard was approved by CEN on 2 September 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 8325:2004: ESIST EN ISO 8325:2005



EN ISO 8325:2004 (E)
2
Foreword
This document (EN ISO 8325:2004) has been prepared by Technical Committee ISO/TC 106 "Dentistry" in collaboration with Technical Committee CEN/TC 55 "Dentistry", the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2005, and conflicting national standards shall be withdrawn at the latest by March 2005.
This document supersedes EN 28325:1990.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 8325:2004 has been approved by CEN as EN ISO 8325:2004 without any modifications.
SIST EN ISO 8325:2005



Reference numberISO 8325:2004(E)© ISO 2004
INTERNATIONAL STANDARD ISO8325Second edition2004-09-15Dentistry — Test methods for rotary instruments Art dentaire — Méthodes d'essai pour instruments rotatifs
SIST EN ISO 8325:2005



ISO 8325:2004(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
©
ISO 2004 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
[e-mail] Web
...