prEN 12953-9
(Main)Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories
Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories
This European Standard specifies requirements for limiters (or limiting devices) which are incorporated into safety systems for shell boilers as defined in EN 12953-1. A limiter (or limiting device) can be either: - a safety accessory as defined in the Pressure Equipment Directive, Article 1, clause 2.1.3, and needs to include the safety logic and final actuator, or - one element of a safety system, for example, a self-monitoring water level sensor used as part of a safety accessory as defined in the Pressure Equipment Directive, Article 1, clause 2.1.3. The overall boiler protection function needs to be provided in association with additional safety logic (where appropriate) and a final actuator. The design requirements and examination of functional capability for the limiters are covered in this European Standard. For an explanation of the extent of the limiter (or limiting device) see Figure A.1.
Großwasserraumkessel Teil 9: Anforderungen an Begrenzungseinrichtungen an Kessel und Zubehör
Chaudières à tubes de fumée Partie 9: Exigences pour les dispositifs de limitation de la chaudière et de ses accessoires
Mnogovodni kotli - 9. del: Zahteve za omejilne naprave kotla in opremo
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 12953-9:2023
01-junij-2023
Mnogovodni kotli - 9. del: Zahteve za omejilne naprave kotla in opremo
Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories
Großwasserraumkessel Teil 9: Anforderungen an Begrenzungseinrichtungen an Kessel
und Zubehör
Chaudières à tubes de fumée Partie 9: Exigences pour les dispositifs de limitation de
lachaudière et de ses accessoires
Ta slovenski standard je istoveten z: prEN 12953-9
ICS:
27.060.30 Grelniki vode in prenosniki Boilers and heat exchangers
toplote
oSIST prEN 12953-9:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 12953-9:2023
---------------------- Page: 2 ----------------------
oSIST prEN 12953-9:2023
DRAFT
EUROPEAN STANDARD
prEN 12953-9
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2023
ICS 27.060.30 Will supersede EN 12953-9:2007
English Version
Shell boilers - Part 9: Requirements for limiting devices of
the boiler and accessories
Chaudières à tubes de fumée - Partie 9: Exigences pour Großwasserraumkessel - Teil 9: Anforderungen an
les dispositifs de limitation de lachaudière et de ses Begrenzungseinrichtungen an Kessel und Zubehör
accessoires
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 269.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12953-9:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 12953-9:2023
prEN 12953-9:2023 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 8
4 Requirements for limiter . 10
4.1 General . 10
4.2 Components . 11
4.3 Materials and design . 12
4.4 Electrical equipment . 13
4.5 Fault assessment .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.