EN 12952-14:2004

Water-tube boilers and auxiliary installations - Part 14: Requirements for flue gas DENOX-systems using liquefied pressurized ammonia and ammonia water solution

This draft European Standard covers the safety requirements regarding the storage and use of:
-   liquefied pressurized ammonia for steam boiler plants;
-   liquid ammonia water solution for the reduction of NOx in the flue gas from boiler plants.
Annex A summarizes the operational aspects.

Wasserrohrkessel und Anlagenkomponenten - Teil 14: Anforderungen an Rauchgas-DENOX-Anlagen die flüssiges Ammoniak und Ammoniakwasserlösung einsetzen

Diese Europäische Norm legt die sicherheitstechnischen Anforderungen fest für die Lagerung und den Einsatz von:
-   druckverflüssigtem Ammoniak für Dampfkesselanlagen;
-   Ammoniakwasserlösungen zur Reduktion von NOx in Rauchgas aus Kesselanlagen.
Anhang A enthält eine Zusammenfassung der betrieblichen Anforderungen.

Chaudières à tubes d'eau et installations auxilaires - Partie 14: Exigences pour les sytèmes de dénitrification (DENOX) des fumées utilisant l'ammoniac liquéfié sous pression et l'ammoniaque liquide

La présente Norme européenne couvre les exigences de sécurité relatives au stockage et à l’utilisation :
   d'ammoniac liquéfié sous pression pour installations de chaudières à vapeur ;
   d'ammoniaque liquide pour le réduction des NOx dans les fumées provenant des installations de chaudières à vapeur .
L’Annexe A résume les aspects liés à l’exploitation.

Vodocevni kotli in pomožne napeljave - 14. del: Zahteve za naprave dimnih plinov DENOX na tekoči amoniak in vodno raztopino amoniaka

General Information

• Status: Published
• Publication Date: 15-Jun-2004
• ICS: 27.040 - Gas and steam turbines. Steam engines
• ICS: 27.060.30 - Boilers and heat exchangers
• Technical Committee: CEN/TC 269 - Shell and water tube boilers
• Drafting Committee: CEN/TC 269/WG 3 - Equipment
• Current Stage: 9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
• Completion Date: 04-Jun-2021
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 12952-14:2004 - Water-tube boilers and auxiliary installations - Part 14: Requirements for flue gas DENOX-systems using liquefied pressurized ammonia and ammonia water solution

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Wasserrohrkessel und Anlagenkomponenten - Teil 14: Anforderungen an Rauchgas-DENOX-Anlagen die flüssiges Ammoniak und Ammoniakwasserlösung einsetzenChaudieres a tubes d'eau et installations auxilaires - Partie 14: Exigences pour les sytemes de dénitrification (DENOX) des fumées utilisant l'ammoniac liquéfié sous pression et l'ammoniaque liquideWater-tube boilers and auxiliary installations - Part 14: Requirements for flue gas DENOX-systems using liquefied pressurized ammonia and ammonia water solution27.060.30Grelniki vode in prenosniki toploteBoilers and heat exchangersICS:Ta slovenski standard je istoveten z:EN 12952-14:2004SIST EN 12952-14:2004en01-september-2004SIST EN 12952-14:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12952-14June 2004ICS 27.040; 27.060.30English versionWater-tube boilers and auxiliary installations - Part 14:Requirements for flue gas DENOX-systems using liquifiedpressurized ammonia and ammonia water solutionChaudières à tubes d'eau et installations auxilaires - Partie14: Exigences pour les sytèmes de dénitrification (DENOX)des fumées utilisant l'ammoniac liquéfié sous pression etl'ammoniaque liquideWasserrohrkessel und Anlagenkomponenten - Teil 14:Anforderungen an Rauchgas-DENOX-Anlagen die flüssigesAmmoniak und Ammoniakwasserlösung einsetzenThis European Standard was approved by CEN on 24 March 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12952-14:2004: ESIST EN 12952-14:2004

Contents page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.6 4 Installations for the storage of liquefied pressurized ammonia.6 4.1 Plant design.6 4.2 Materials.6 4.3 Design of storage vessel.9 4.4 Manufacture.10 4.5 Tests and inspections prior to commissioning.12 4.6 Piping systems for ammonia.13 4.7 Electrical equipment.14 4.8 Equipment of storage vessels.14 4.9 Evaporator station.15 5 Installations for the storage of liquid ammonia.16 5.1 Plant design.16 5.2 Materials.16 5.3 Design of storage vessel.18 5.4 Manufacture.18 5.5 Testing and inspection prior to commissioning.19 5.6 Pipe systems for ammonia.19 5.7 Electrical equipment.20 5.8 Equipment.20 5.9 Production of ammonia vapour.21 Annex A (informative)
Operational aspects.23 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive for Pressure Equipment.24 Bibliography.25
3 Foreword This document (EN 12952-14:2004) has been prepared by Technical Committee CEN/TC 269 “Shell and water-tube boilers”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2004, and conflicting national standards shall be withdrawn at the latest by December 2004. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. The European Standard EN 12952 concerning water-tube boilers and auxiliary installations consists of the following parts:  Part
1: General  Part
2: Materials for pressure parts of boilers and accessories  Part
3: Design and calculation for pressure parts  Part
4: In-service boiler life expectancy calculations  Part
5: Workmanship and construction of pressure parts of the boiler  Part
6: Inspection during construction; documentation and marking of pressure parts of the boiler  Part
7: Requirements for equipment for the boiler  Part
8: Requirements for firing systems for liquid and gaseous fuels for the boiler  Part
9: Requirements for firing systems for pulverized solid fuels for the boiler  Part 10: Requirements for safeguards against excessive pressure  Part 11: Requirements for limiting devices of the boiler and accessories  Part 12: Requirements for boiler feedwater and boiler water quality  Part 13: Requirements for flue gas cleaning systems  Part 14: Requirements for flue gas DENOX-systems using liquified pressurized ammonia and ammonia water
solution  Part 15: Acceptance tests  Part 16: Requirements for grate and fluidized-bed firing systems for solid fuels for the boiler
CR 12952-17: Water-tube boilers and auxiliary installations – Part 17: Guideline for the involvement of an inspec-tion body independent of the manufacturer
Although these Parts may be obtained separately, it should be recognized that the parts are interdependent. As such, the design and manufacture of boilers requires the application of more than one Part in order for the require-ments of the standard to be satisfactorily fulfilled. NOTE Part 4 and 15 are not applicable during the design, construction and installation stages. The annex A of this European Standard is informative. This document includes a Bibliography. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following coun-tries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Esto-nia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 12952-14:2004

1 Scope This draft European Standard covers the safety requirements regarding the storage and use of:  liquefied pressurized ammonia for steam boiler plants;  liquid ammonia water solution for the reduction of NOx in the flue gas from boiler plants. Annex A summarizes the operational aspects. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 287-1, Qualification test of welders — Fusion welding — Part 1: Steels. EN 764:1994, Pressure equipment — Terminology and symbols — Pressure, temperature, volume. EN 764-7, Pressure equipment —Part 7:
Safety systems for unfired pressure equipment. EN 1011-1, Welding — Recommendations for welding of metallic materials — Part 1: General guidance for arc welding. EN 1011-2, Welding — Recommendations for welding of metallic materials — Part 2: Arc welding of ferritic steels. EN 1011-3, Welding — Recommendations for welding of metallic materials — Part 3: Arc welding of stainless steels. EN 1043-1, Destructive tests on welds in metallic materials — Hardness testing — Part 1: Hardness test on arc welded joints. EN 1043-2, Destructive tests on welds in metallic materials — Hardness testing — Part 2: Micro hardness testing on welded joints. EN 1563, Founding — Spheroidal graphite cast irons. EN 1712, Non-destructive examination of welds — Ultrasonic examination of welded joints — Acceptance levels. EN 1713, Non-destructive examination of welds — Ultrasonic examination — Characterization of indications in welds. EN 1714, Non-destructive examination of welds — Ultrasonic examination of welded joints. EN 10002-1, Metallic materials — Tensile testing — Part 1: Method of test at ambient temperature. EN 10025, Hot rolled products of non-alloy structural steels — Technical delivery conditions
EN 10028-3, Flat products made of steels for pressure purposes — Part 3: Weldable fine grain steels, normalized. EN 10028-7, Flat products made of steels for pressure purposes — Part 7: Stainless steels. EN 10204:1991, Metallic products — Types of inspection documents. EN 10213-2, Technical delivery conditions for steel castings for pressure purposes — Part 2: Steel grades for use at room temperature and elevated temperatures. SIST EN 12952-14:2004

5 EN 10216-1, Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 1: Non-alloy steel tubes with specified room temperature properties. EN 10216-2, Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties. EN 10216-3, Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 3: Alloy fine grain steel tubes. EN 10217-1, Welded steel tubes for pressure purposes — Technical delivery conditions — Part 1: Non-alloy steel tubes with specified room temperature properties. EN 10222-4, Steel forgings for pressure purposes — Part 4: Weldable fine grain steels with high proof strength. EN 10228-3, Non-destructive testing of steel forgings — Part 3: Ultrasonic testing of ferritic or martensitic steel for-gings. EN 12266-1:2003, Industrial valves — Testing of valves — Part 1: Pressure tests, test procedures and acceptance criteria — Mandatory requirements. EN 12952-2, Water-tube boilers and auxiliary installations — Part 2: Materials for pressure parts of boilers and accessories. EN 12952-3:2001, Water-tube boilers and auxiliary installations — Part 3: Design and calculation for pressure parts. EN 12952-5, Water-tube boilers and auxiliary installations — Part 5: Workmanship and construction of pressure parts of the boiler. EN 13445-1:2002, Unfired pressure vessels — Part 1: General. EN 13445-2, Unfired pressure vessels — Part 2: Materials. EN 13445-3, Unfired pressure vessels — Part 3: Design. EN 13445-4, Unfired pressure vessels — Part 4: Fabrication. EN 13445-5, Unfired pressure vessels — Part 5: Inspection and testing. EN 13480-3, Metallic industrial piping — Part 3: Design and calculation. EN 20898-2, Mechanical properties of fasteners — Part 2: Nuts with specified proof load values — Coarse thread (ISO 898-2:1992). prEN 50156-1, Electrical equipment for furnaces and ancillary equipment — Part 1: Requirements for application design and installation. EN 60079-10, Electrical apparatus for explosive gas atmospheres — Par
...