prEN 10365
(Main)Hot rolled steel channels, I and H sections - Dimensions and masses
Hot rolled steel channels, I and H sections - Dimensions and masses
This document specifies the nominal dimensions and masses of the hot rolled steel channels, I and H sections.
The following shapes are covered by this document:
Sections:
- parallel flange I sections IPE;
- parallel wide flange beams HE;
- parallel extra wide flange beams HL and HLZ;
- parallel wide flange columns HD;
- parallel wide flange bearing piles HP and UBP;
- parallel flange universal beams UB;
- parallel flange universal columns UC;
- taper flange I sections IPN and J.
Channels:
- parallel flange channels UPE and PFC;
- taper flange channels UPN, U and CH.
These requirements do not apply to hot rolled steel channels, I- and H- sections from stainless steel.
Warmgewalzter U-Profilstahl, I- und H-Träger - Maße und Masse
Dieses Dokument legt die Maße und Masse für warmgewalzte U-Profile, I und H Träger aus Stahl fest.
Dieses Dokument gilt für folgende Produkte:
Träger:
- I-Träger mit parallelen Flanschflächen, IPE-Reihe
- Breite I-Träger mit parallelen Flanschflächen, HE-Reihe
- Breite I-Träger mit besonders breiten Flanschen, HL und HLZ-Reihe
- Breite I-Träger, Breitflansch und Stützenprofile, HD-Reihe
- Breite I-Träger mit gleicher Dicke für Flansche und Steg, HP und UBP-Reihe
- Universal I-Träger, UB-Reihe
- Universal I-Träger, UC-Reihe
- I-Träger mit geneigten inneren Flanschflächen, IPN und J-Reihe
U-Profile:
- U-Profile mit parallelen Flanschflächen, UPE und PFC-Reihe
- U-Profile mit geneigten inneren Flanschflächen, UPN, U und CH-Reihe.
Die Festlegungen dieser Norm gelten nicht für warmgewalzte U-Profile, I und H Träger aus nicht rostendem Stahl.
Profilés en U en aciers laminés à chaud, poutrelles I et H - Dimensions et masses
La présent document spécifie les dimensions et masses nominales des profilés en U en aciers laminés à chaud, et des poutrelles I et H.
Les formes suivantes sont couvertes par le présent document :
Poutrelles :
⎯
poutrelles en I à ailes parallèles IPE ;
- poutrelles à larges ailes HE ;
- poutrelles à très larges ailes HL et HLZ ;
- poutrelles-poteaux à large ailes HD ;
- poutrelles-pieux à larges ailes HP and UBP ;
- poutrelles universelles UB ;
- poutrelles-poteaux universelles UC ;
- poutrelles en I à ailes inclinées IPN and J ;
Profilés :
- profils en U à ailes parallèles UPE et PFC ;
- profils en U à ailes inclinées UPN, U and CH.
Ces exigences ne s'appliquent ni aux profilés en U en acier laminés à chaud ni aux poutrelles I et H en acier inoxydable.
Vroče valjani jekleni profili I in H - Mere in mase
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2025
Vroče valjani jekleni profili I in H - Mere in mase
Hot rolled steel channels, I and H sections - Dimensions and masses
Warmgewalzter U-Profilstahl, I- und H-Träger - Maße und Masse
Profilés en U en aciers laminés à chaud, poutrelles I et H - Dimensions et masses
Ta slovenski standard je istoveten z: prEN 10365
ICS:
77.140.70 Jekleni profili Steel profiles
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2025
ICS 77.140.70 Will supersede EN 10365:2017
English Version
Hot rolled steel channels, I and H sections - Dimensions
and masses
Profilés en U en aciers laminés à chaud, poutrelles I et Warmgewalzter U-Profilstahl, I- und H-Träger - Maße
H - Dimensions et masses und Masse
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 459/SC 3.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 10365:2025 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Designation . 5
5 Dimensions and masses . 5
6 Tolerances on dimensions, shape and mass . 7
7 Material . 7
Annex A (informative) Formulae for the calculation of sectional properties . 33
Annex B (informative) Comparison of symbols used in EN 10024, EN 10034 and EN 10279
with those in this standard and EN 1993-1-1 . 40
Bibliography . 41
European foreword
This document (prEN 10365:2025) has been prepared by Technical Committee CEN/TC 459/SC 3
“Structural steels other than reinforcements”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 10365:2017.
In comparison to the previous edition, following technical modifications have been made:
— addition of divers new dimensions;
— addition of Annex A with formulae for static values;
— editorial update.
1 Scope
This document specifies the nominal dimensions and masses of the hot rolled steel channels, I and H
sections.
The following shapes are covered by this document:
Sections:
— parallel flange I sections IPE;
— parallel wide flange beams HE;
— parallel extra wide flange beams HL and HLZ;
— parallel wide flange columns HD;
— parallel wide flange bearing piles HP and UBP;
— parallel flange universal beams UB;
— parallel flange universal columns UC;
— taper flange I sections IPN and J.
Channels:
— parallel flange channels UPE and PFC;
— taper flange channels UPN, U and CH.
These requirements do not apply to hot rolled steel channels, I- and H- sections from stainless steel.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 10024, Hot rolled taper flange I sections - Tolerances on shape and dimensions
EN 10025-2, Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy
structural steels
EN 10025-3, Hot rolled products of structural steels - Part 3: Technical delivery conditions for
normalized/normalized rolled weldable fine grain structural steels
EN 10025-4, Hot rolled products of structural steels - Part 4: Technical delivery conditions for
thermomechanical rolled weldable fine grain structural steels
EN 10025-5, Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural
steels with improved atmospheric corrosion resistance
EN 10034, Structural steel I and H sections - Tolerances on shape and dimensions
EN 10079, Definition of steel products
EN 10279, Hot rolled steel channels - Tolerances on shape, dimensions and mass
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 10079 apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp/
— IEC Electropedia: available at https://www.electropedia.org/
4 Designation
A section shall be designated according to Tables 1 to 15.
This form of designation shall be used in any enquiry and order.
5 Dimensions and masses
Hot rolled steel channels, I and H sections complying with this document shall be manufactured with
the specified dimensions given in the Table 1 to 15 and according to Figures 1 to 4 below.
Radii of fillets and toes of shape profiles vary with individual manufacturers and therefore are not
specified. Radii given by the manufacturer or fixed otherwise, are only for the calculation of the nominal
sectional properties and cannot be used for any other purpose.
The masses per unit length specified in Tables 1 to 15 were calculated on the basis of a density of
7850 kg/m .
Figure 1 — IPE, HE, HL, HD, HP, UBP, UB and UC parallel flange sections
Figure 2 — Taper flange I sections IPN, J and extra wide flange beams HLZ
Figure 3 — Parallel flange channels UPE and PFC
Key
for UPN-channels:
h ≤ 300 mm taper flange angle α = 8 % and b1 = b/2
h> 300 mm taper flange angle α = 5 % and b1 = (b-
t )/2
w
for CH- and U-channels: b = b/2
Figure 4 — Taper flange channels UPN, U and CH
6 Tolerances on dimensions, shape and mass
Tolerances on dimensions, shape and mass shall be as given in EN 10034 for I (parallel flanges) and H
sections.
Tolerances on dimensions, shape and mass shall be as given in EN 10024 for taper flange I sections.
Tolerances on dimensions, shape and mass shall be as given in EN 10279 for channels.
Tolerances for shapes not included in the mentioned standards shall be as agreed upon between the
manufacturer and the purchaser.
7 Material
Sections and channels shall preferably be made from steel of a grade as specified in, EN 10025-2,
EN 10025-3, EN 10025-4 and EN 10025-5. Other steel grades as specified in EN 10225-2, EN 10028-2
and EN 10273 may also be used for specific applications.
The desired steel grade shall be specified at the time of ordering.
Table 1 — Parallel flange I sections IPE
Designation Dimensions
M h b tw tf A
kg/m mm mm mm mm cm
IPE AA 80 4,9 78,0 46,0 3,2 4,2 6,3
IPE A 80 5,0 78,0 46,0 3,3 4,2 6,4
IPE 80 6,0 80,0 46,0 3,8 5,2 7,6
IPE AA 100 6,7 97,6 55,0 3,6 4,5 8,6
IPE A 100 6,9 98,0 55,0 3,6 4,7 8,8
IPE 100 8,1 100,0 55,0 4,1 5,7 10,3
IPE AA 120 8,4 117,0 64,0 3,8 4,8 10,7
IPE A 120 8,7 117,6 64,0 3,8 5,1 11,0
IPE 120 10,4 120,0 64,0 4,4 6,3 13,2
IPE AA 140 10,1 136,6 73,0 3,8 5,2 12,8
IPE A 140 10,5 137,4 73,0 3,8 5,6 13,4
IPE 140 12,9 140,0 73,0 4,7 6,9 16,4
IPE AA 160 12,3 156,4 82,0 4,0 5,6 15,7
IPE A 160 12,7 157,0 82,0 4,0 5,9 16,2
IPE 160 15,8 160,0 82,0 5,0 7,4 20,1
IPE AA 180 14,9 176,4 91,0 4,3 6,2 19,0
IPE A 180 15,4 177,0 91,0 4,3 6,5 19,6
IPE 180 18,8 180,0 91,0 5,3 8,0 23,9
IPE O 180 21,3 182,0 92,0 6,0 9,0 27,1
IPE AA 200 18,0 196,4 100,0 4,5 6,7 22,9
IPE A 200 18,4 197,0 100,0 4,5 7,0 23,5
IPE 200 22,4 200,0 100,0 5,6 8,5 28,5
IPE O 200 25,1 202,0 102,0 6,2 9,5 32,0
IPE AA 220 21,2 216,4 110,0 4,7 7,4 27,0
IPE A 220 22,2 217,0 110,0 5,0 7,7 28,3
IPE 220 26,2 220,0 110,0 5,9 9,2 33,4
IPE O 220 29,4 222,0 112,0 6,6 10,2 37,4
IPE AA 240 24,9 236,4 120,0 4,8 8,0 31,7
IPE A 240 26,2 237,0 120,0 5,2 8,3 33,3
IPE 240 30,7 240,0 120,0 6,2 9,8 39,1
IPE O 240 34,3 242,0 122,0 7,0 10,8 43,7
IPE A 270 30,7 267,0 135,0 5,5 8,7 39,2
IPE 270 36,1 270,0 135,0 6,6 10,2 45,9
IPE O 270 42,3 274,0 136,0 7,5 12,2 53,8
IPE A 300 36,5 297,0 150,0 6,1 9,2 46,5
IPE 300 42,2 300,0 150,0 7,1 10,7 53,8
Designation Dimensions
M h b tw tf A
kg/m mm mm mm mm cm
IPE O 300 49,3 304,0 152,0 8,0 12,7 62,8
IPE A 330 43,0 327,0 160,0 6,5 10,0 54,7
IPE 330 49,1 330,0 160,0 7,5 11,5 62,6
IPE O 330 57,0 334,0 162,0 8,5 13,5 72,6
IPE AA 360 47,0 356,4 170,0 6,0 10,9 59,9
IPE A 360 50,2 357,6 170,0 6,6 11,5 64,0
IPE 360 57,1 360,0 170,0 8,0 12,7 72,7
IPE O 360 66,0 364,0 172,0 9,2 14,7 84,1
IPE AA 400 53,4 395,6 180,0 6,3 11,3 68,0
IPE A 400 57,4 397,0 180,0 7,0 12,0 73,1
IPE 400 66,3 400,0 180,0 8,6 13,5 84,5
IPE O 400 75,7 404,0 182,0 9,7 15,5 96,4
IPE V 400 84,0 408,0 182,0 10,6 17,5 107,0
IPE AA 450 62,1 445,4 190,0 6,8 12,3 79,1
IPE A 450 67,2 447,0 190,0 7,6 13,1 85,6
IPE 450 77,6 450,0 190,0 9,4 14,6 98,8
IPE O 450 92,4 456,0 192,0 11,0 17,6 117,7
IPE V 450 107 460,0 194,0 12,4 19,6 132,0
IPE AA 500 73,2 495,2 200,0 7,5 13,6 93,3
IPE A 500 79,4 497,0 200,0 8,4 14,5 101,1
IPE 500 90,7 500,0 200,0 10,2 16,0 115,5
IPE O 500 107 506,0 202,0 12,0 19,0 136,7
IPE V 500 129 514,0 204,0 14,2 23,0 164,1
IPE AA 550 79,5 541,0 210,0 8,5 12,5 101,3
IPE A 550 92,1 547,0 210,0 9,0 15,7 117,3
IPE 550 106 550,0 210,0 11,1 17,2 134,4
IPE O 550 123 556,0 212,0 12,7 20,2 156,1
IPE V 550 159 566,0 216,0 17,1 25,2 202,0
IPE A 600 108 597,0 220,0 9,8 17,5 137,0
IPE 600 122 600,0 220,0 12,0 19,0 156,0
IPE O 600 154 610,0 224,0 15,0 24,0 196,8
IPE V 600 184 618,0 228,0 18,0 28,0 233,8
IPE 750 × 134 134 750,0 264,0 12,0 15,5 170,6
IPE 750 × 147 147 753,0 265,0 13,2 17,0 187,5
IPE 750 × 173 173 762,0 267,0 14,4 21,6 221,3
IPE 750 × 196 196 770,0 268,0 15,6 25,4 250,8
IPE 750 × 220 220 779,0 266,0 16,5 30,0 280,7
Table 2 — Wide flange beams HE
Designation Dimensions
M h b tw tf A
kg/m mm mm mm mm cm
HE 100 AA 12,2 91,0 100,0 4,2 5,5 15,6
HE 100 A 16,7 96,0 100,0 5,0 8,0 21,2
HE 100 B 20,4 100,0 100,0 6,0 10,0 26,0
HE 100 C 30,9 110,0 103,0 9,0 15,0 39,3
HE 100 M 41,8 120,0 106,0 12,0 20,0 53,2
HE 120 AA 14,6 109,0 120,0 4,2 5,5 18,6
HE 120 A 19,9 114,0 120,0 5,0 8,0 25,3
HE 120 B 26,7 120,0 120,0 6,5 11,0 34,0
HE 120 C 39,2 130,0 123,0 9,5 16,0 49,9
HE 120 M 52,1 140,0 126,0 12,5 21,0 66,4
HE 140 AA 18,1 128,0 140,0 4,3 6,0 23,0
HE 140 A 24,7 133,0 140,0 5,5 8,5 31,4
HE 140 B 33,7 140,0 140,0 7,0 12,0 43,0
HE 140 C 48,2 150,0 143,0 10,0 17,0 61,5
HE 140 M 63,2 160,0 146,0 13,0 22,0 80,6
HE 160 AA 23,8 148,0 160,0 4,5 7,0 30,4
HE 160 A 30,4 152,0 160,0 6,0 9,0 38,8
HE 160 B 42,6 160,0 160,0 8,0 13,0 54,3
HE 160 C 59,2 170,0 163,0 11,0 18,0 75,4
HE 160 M 76,2 180,0 166,0 14,0 23,0 97,1
HE 180 AA 28,7 167,0 180,0 5,0 7,5 36,5
HE 180 A 35,5 171,0 180,0 6,0 9,5 45,3
HE 180 B 51,2 180,0 180,0 8,5 14,0 65,3
HE 180 C 69,8 190,0 183,0 11,5 19,0 89,0
HE 180 M 88,9 200,0 186,0 14,5 24,0 113,3
HE 200 AA 34,6 186,0 200,0 5,5 8,0 44,1
HE 200 A 42,3 190,0 200,0 6,5 10,0 53,8
HE 200 B 61,3 200,0 200,0 9,0 15,0 78,1
HE 200 C 81,9 210,0 203,0 12,0 20,0 104,4
HE 200 M 103 220,0 206,0 15,0 25,0 131,3
HE 220 AA 40,4 205,0 220,0 6,0 8,5 51,5
HE 220 A 50,5 210,0 220,0 7,0 11,0 64,3
HE 220 B 71,5 220,0 220,0 9,5 16,0 91,0
HE 220 C 94,1 230,0 223,0 12,5 21,0 119,9
HE 220 M 117 240,0 226,0 15,5 26,0 149,4
HE 240 AA 47,4 224,0 240,0 6,5 9,0 60,4
HE 240 A 60,3 230,0 240,0 7,5 12,0 76,8
Designation Dimensions
M h b tw tf A
kg/m mm mm mm mm cm
HE 240 B 83,2 240,0 240,0 10,0 17,0 106,0
HE 240 C 119 255,0 244,0 14,0 24,5 152,2
HE 240 M 157 270,0 248,0 18,0 32,0 199,6
HE 260 AA 54,1 244,0 260,0 6,5 9,5 69,0
HE 260 A 68,2 250,0 260,0 7,5 12,5 86,8
HE 260 B 93,0 260,0 260,0 10,0 17,5 118,4
HE 260 C 132 275,0 264,0 14,0 25,0 168,4
HE 260 M 172 290,0 268,0 18,0 32,5 219,6
HE 280 AA 61,2 264,0 280,0 7,0 10,0 78,0
HE 280 A 76,4 270,0 280,0 8,0 13,0 97,3
HE 280 B 103 280,0 280,0 10,5 18,0 131,4
HE 280 C 145 295,0 284,0 14,5 25,5 185,2
HE 280 M 189 310,0 288,0 18,5 33,0 240,2
HE 300 AA 69,8 283,0 300,0 7,5 10,5 88,9
HE 300 A 88,3 290,0 300,0 8,5 14,0 112,5
HE 300 B 117 300,0 300,0 11,0 19,0 149,1
HE 300 C 177 320,0 305,0 16,0 29,0 225,1
HE 300 M 238 340,0 310,0 21,0 39,0 303,1
HE 320 AA 74,2 301,0 300,0 8,0 11,0 94,6
HE 320 A 97,6 310,0 300,0 9,0 15,5 124,4
HE 320 B 127 320,0 300,0 11,5 20,5 161,3
HE 320 C 186 340,0 305,0 16,0 30,5 236,9
HE 320 M 245 359,0 309,0 21,0 40,0 312,0
HE 340 AA 78,9 320,0 300,0 8,5 11,5 100,5
HE 340 A 105 330,0 300,0 9,5 16,5 133,5
HE 340 B 134 340,0 300,0 12,0 21,5 170,9
HE 340 M 248 377,0 309,0 21,0 40,0 315,8
HE 360 AA 83,7 339,0 300,0 9,0 12,0 106,6
HE 360 A 112 350,0 300,0 10,0 17,5 142,8
HE 360 B 142 360,0 300,0 12,5 22,5 180,6
HE 360 M 250 395,0 308,0 21,0 40,0 318,8
HE 400 AA 92,4 378,0 300,0 9,5 13,0 117,7
HE 400 A 125 390,0 300,0 11,0 19,0 159,0
HE 400 B 155 400,0 300,0 13,5 24,0 197,8
HE 400 M 256 432,0 307,0 21,0 40,0 325,8
HE 450 AA 99,7 425,0 300,0 10,0 13,5 127,1
HE 450 A 140 440,0 300,0 11,5 21,0 178,0
HE 450 B 171 450,0 300,0 14,0 26,0 218,0
Designation Dimensions
M h b tw tf A
kg/m mm mm mm mm cm
HE 450 M 263 478,0 307,0 21,0 40,0 335,4
HE 500 AA 107 472,0 300,0 10,5 14,0 136,9
HE 500 A 155 490,0 300,0 12,0 23,0 197,5
HE 500 B 187 500,0 300,0 14,5 28,0 238,6
HE 500 M 270 524,0 306,0 21,0 40,0 344,3
HE 550 AA 120 522,0 300,0 11,5 15,0 152,8
HE 550 A 166 540,0 300,0 12,5 24,0 211,8
HE 550 B 199 550,0 300,0 15,0 29,0 254,1
HE 550 M 278 572,0 306,0 21,0 40,0 354,4
HE 600 AA 129 571,0 300,0 12,0 15,5 164,1
HE 600 A 178 590,0 300,0 13,0 25,0 226,5
HE 600 B 212 600,0 300,0 15,5 30,0 270,0
HE 600 M 285 620,0 305,0 21,0 40,0 363,7
HE 600 × 337 337 632,0 310,0 25,5 46,0 429,2
HE 600 × 399 399 648,0 315,0 30,0 54,0 508,5
HE 650 AA 138 620,0 300,0 12,5 16,0 175,8
HE 650 A 190 640,0 300,0 13,5 26,0 241,6
HE 650 B 225 650,0 300,0 16,0 31,0 286,3
HE 650 M 293 668,0 305,0 21,0 40,0 373,7
HE 650 × 343 343 680,0 309,0 25,0 46,0 437,5
HE 650 × 407 407 696,0 314,0 29,5 54,0 518,8
HE 700 AA 150 670,0 300,0 13,0 17,0 190,9
HE 700 A 204 690,0 300,0 14,5 27,0 260,5
HE 700 B 241 700,0 300,0 17,0 32,0 306,4
HE 700 M 301 716,0 304,0 21,0 40,0 383,0
HE 700 × 352 352 728,0 308,0 25,0 46,0 448,6
HE 700 × 418 418 744,0 313,0 29,5 54,0 531,9
HE 800 AA 172 770,0 300,0 14,0 18,0 218,5
HE 800 A 224 790,0 300,0 15,0 28,0 285,8
HE 800 B 262 800,0 300,0 17,5 33,0 334,2
HE 800 M 317 814,0 303,0 21,0 40,0 404,3
HE 800 × 373 373 826,0 308,0 25,0 46,0 474,6
HE 800 × 444 444 842,0 313,0 30,0 54,0 566,0
HE 900 AA 198 870,0 300,0 15,0 20,0 252,2
HE 900 A 252 890,0 300,0 16,0 30,0 320,5
HE 900 B 291 900,0 300,0 18,5 35,0 371,3
HE 900 M 333 910,0 302,0 21,0 40,0 423,6
HE 900 × 391 391 922,0 307,0 25,0 46,0 497,7
Designation Dimensions
M h b tw tf A
kg/m mm mm mm mm cm
HE 900 × 466 466 938,0 312,0 30,0 54,0 593,7
HE 1000 AA 222 970,0 300,0 16,0 21,0 282,2
HE 1000 × 249 249 980,0 300,0 16,5 26,0 316,8
HE 1000 A 272 990,0 300,0 16,5 31,0 346,8
HE 1000 B 314 1000,0 300,0 19,0 36,0 400,0
HE 1000 M 349 1008,0 302,0 21,0 40,0 444,2
HE 1000 × 393 393 1016,0 303,0 24,4 43,9 500,2
HE 1000 × 415 415 1020,0 304,0 26,0 46,0 528,7
HE 1000 × 438 438 1026,0 305,0 26,9 49,0 556,0
HE 1000 × 494 494 1036,0 309,0 31,0 54,0 629,1
HE 1000 × 584 584 1056,0 314,0 36,0 64,0 743,7
Table 3 — Extra wide flange beams HL and HLZ
Designation Dimensions
M h b tw tf A
kg/m mm mm mm mm cm
HL 920 × 344 344 927,0 418,0 19,3 32,0 437,2
HL 920 × 368 368 931,0 419,0 20,3 34,3 465,6
HL 920 × 390 390 936,0 420,0 21,3 36,6 494,3
HL 920 × 420 420 943,0 422,0 22,5 39,9 534,1
HL 920 × 449 449 948,0 423,0 24,0 42,7 571,4
HL 920 × 491 491 957,0 422,0 25,9 47,0 623,3
HL 920 × 537 537 965,0 425,0 28,4 51,1 682,5
HL 920 × 588 588 975,0 427,0 31,0 55,9 748,1
HL 920 × 656 656 987,0 431,0 34,5 62,0 835,3
HL 920 × 725 725 999,0 434,0 38,1 68,1 922,9
HL 920 × 787 787 1011,0 437,0 40,9 73,9 1002,0
HL 920 × 970 970 1043,0 446,0 50,0 89,9 1236,6
HL 920 × 1077 1077 1061,0 451,0 55,0 99,1 1371,5
HL 920 × 1194 1194 1081,0 457,0 60,5 109,0 1521,5
HL 920 × 1269 1269 1093,0 461,0 64,0 115,1 1616,5
HL 920 × 1377 1377 1093,0 473,0 76,7 115,1 1753,7
HL 1000 AA 296 982,0 400,0 16,5 27,1 377,6
HL 1000 A 321 990,0 400,0 16,5 31,0 408,8
HL 1000 B 371 1000,0 400,0 19,0 36,1 472,8
HL 1000 M 412 1008,0 402,0 21,1 40,0 525,1
HL 1000 × 443 443 1012,0 402,0 23,6 41,9 563,7
HL 1000 × 483 483 1020,0 404,0 25,4 46,0 615,1
HL 1000 × 539 539 1030,0 407,0 28,4 51,1 687,2
HL 1000 × 554 554 1032,0 408,0 29,5 52,0 705,8
HL 1000 × 591 591 1040,0 409,0 31,0 55,9 752,7
HL 1000 × 642 642 1048,0 412,0 34,0 60,0 817,6
HL 1000 × 748 748 1068,0 417,0 39,0 70,0 953,4
HL 1000 × 883 883 1092,0 424,0 45,5 82,0 1125,3
HL 1000 × 976 976 1108,0 428,0 50,0 89,9 1241,4
HL 1100 A 343 1090,0 400,0 18,0 31,0 436,5
HL 1100 B 390 1100,0 400,0 20,0 36,0 497,0
HL 1100 M 433 1108,0 402,0 22,0 40,0 551,2
HL 1100 R 499 1118,0 405,0 26,0 45,0 635,2
HL 1100 × 548 548 1128,0 407,0 28,0 50,0 698,3
HL 1100 × 607 607 1138,0 410,0 31,0 55,0 773,1
HLZ 1100 A 393 1075,4 458,0 20,0 31,0 500,8
HLZ 1100 B 408 1079,4 458,0 20,0 33,0 519,1
Designation Dimensions
M h b tw tf A
kg/m mm mm mm mm cm
HLZ 1100 C 430 1083,4 459,0 21,0 35,0 548,3
HLZ 1100 D 453 1087,4 460,0 22,0 37,0 577,5
Table 4 — Wide flange columns HD
Designation Dimensions
M h b tw tf A
kg/m mm mm mm mm cm
HD 260 × 54,1 54,1 244,0 260,0 6,5 9,5 69,0
HD 260 × 68,2 68,2 250,0 260,0 7,5 12,5 86,8
HD 260 × 93,0 93,0 260,0 260,0 10,0 17,5 118,4
HD 260 × 114 114 268,0 262,0 12,5 21,5 145,7
HD 260 × 142 142 278,0 265,0 15,5 26,5 180,3
HD 260 × 172 172 290,0 268,0 18,0 32,5 219,6
HD 260 × 225 225 309,0 271,0 24,0 42,0 286,6
HD 260 × 299 299 335,0 278,0 31,0 55,0 380,5
HD 320 × 74,2 74,2 301,0 300,0 8,0 11,0 94,6
HD 320 × 97,6 97,6 310,0 300,0 9,0 15,5 124,4
HD 320 × 127 127 320,0 300,0 11,5 20,5 161,3
HD 320 × 158 158 330,0 303,0 14,5 25,5 201,2
HD 320 × 198 198 343,0 306,0 18,0 32,0 252,3
HD 320 × 245 245 359,0 309,0 21,0 40,0 312,0
HD 320 × 300 300 375,0 313,0 27,0 48,0 382,1
HD 360 × 134 134 356,0 369,0 11,2 18,0 170,6
HD 360 × 147 147 360,0 370,0 12,3 19,8 187,9
HD 360 × 162 162 364,0 371,0 13,3 21,8 206,3
HD 360 × 179 179 368,0 373,0 15,0 23,9 228,3
HD 360 × 196 196 372,0 374,0 16,4 26,2 250,3
HD 400 × 187 187 368,0 391,0 15,0 24,0 237,6
HD 400 × 216 216 375,0 394,0 17,3 27,7 275,5
HD 400 × 237 237 380,0 395,0 18,9 30,2 300,9
HD 400 × 262 262 387,0 398,0 21,1 33,3 334,6
HD 400 × 287 287 393,0 399,0 22,6 36,6 366,3
HD 400 × 314 314 399,0 401,0 24,9 39,6 399,2
HD 400 × 347 347 407,0 404,0 27,2 43,7 442,0
HD 400 × 382 382 416,0 406,0 29,8 48,0 487,1
HD 400 × 421 421 425,0 409,0 32,8 52,6 537,1
HD 400 × 463 463 435,0 412,0 35,8 57,4 589,5
HD 400 × 509 509 446,0 416,0 39,1 62,7 649,0
HD 400 × 551 551 455,0 418,0 42,0 67,6 701,4
HD 400 × 592 592 465,0 421,0 45,0 72,3 754,9
HD 400 × 634 634 474,0 424,0 47,6 77,1 808,0
HD 400 × 677 677 483,0 428,0 51,2 81,5 863,4
HD 400 × 744 744 498,0 432,0 55,6 88,9 948,1
HD 400 × 818 818 514,0 437,0 60,5 97,0 1043,3
HD 400 × 900 900 531,0 442,0 65,9 106,0 1149,2
HD 400 × 990 990 550,0 448,0 71,9 115,0 1262,4
HD 400 × 1086 1086 569,0 454,0 78,0 125,0 1385,8
HD 400 × 1202 1202 580,0 471,0 95,0 130,0 1530,5
HD 400 × 1299 1299 600,0 476,0 100,0 140,0 1654,7
HD 400 x 1384 1384 617,0 481,0 104,5 148,4 1760,0
HD 400 x 1488 1488 640,0 484,0 108,0 159,8 1890,0
Table 5 — Wide flange bearing piles HP
Designation Dimensions
M h b tw tf A
kg/m mm mm mm mm cm
HP 200 × 43 42,5 200,0 205,0 9,0 9,0 54,1
HP 200 × 53 53,5 204,0 207,0 11,3 11,3 68,4
HP 220 × 57 57,2 210,0 224,5 11,0 11,0 72,9
HP 260 × 75 75,0 249,0 265,0 12,0 12,0 95,5
HP 260 × 87 87,3 253,0 267,0 14,0 14,0 111,0
HP 305 × 79 78,9 299,3 306,4 11,0 11,1 100,5
HP 305 × 88 88,5 301,7 307,8 12,4 12,3 112,1
HP 305 × 95 94,9 303,7 308,7 13,3 13,3 121,0
HP 305 × 110 110 307,9 310,7 15,3 15,4 140,1
HP 305 × 126 126 312,3 312,9 17,5 17,6 160,6
HP 305 × 149 149 318,5 316,0 20,6 20,7 189,9
HP 305 × 180 180 326,7 319,7 24,8 24,8 229,3
HP 305 × 186 186 328,3 320,9 25,5 25,6 236,9
HP 305 × 223 223 337,9 325,7 30,3 30,4 284,0
HP 320 × 88 88,5 303,0 304,0 12,0 12,0 112,7
HP 320 × 103 103 307,0 306,0 14,0 14,0 131,0
HP 320 × 117 117 311,0 308,0 16,0 16,0 149,5
HP 320 × 147 147 319,0 312,0 20,0 20,0 186,9
HP 320 × 184 184 329,0 317,0 25,0 25,0 234,5
HP 360 × 109 109 346,4 371,0 12,8 12,9 138,7
HP 360 × 133 133 352,0 373,8 15,6 15,7 169,4
HP 360 × 152 152 356,4 376,0 17,8 17,9 193,7
HP 360 × 174 174 361,4 378,5 20,3 20,4 221,5
HP 360 × 180 180 362,9 378,8 21,1 21,1 229,5
HP 400 × 122 122 348,0 390,0 14,0 14,0 155,9
HP 400 × 140 140 352,0 392,0 16,0 16,0 178,6
HP 400 × 158 158 356,0 394,0 18,0 18,0 201,4
HP 400 × 176 176 360,0 396,0 20,0 20,0 224,3
HP 400 × 194 194 364,0 398,0 22,0 22,0 247,5
HP 400 × 213 213 368,0 400,0 24,0 24,0 270,7
HP 400 × 231 231 372,0 402,0 26,0 26,0 294,2
HP 460 × 202 202 445,0 451,0 19,1 19,1 257,0
HP 460 × 234 234 451,0 454,0 22,1 22,1 298,0
HP 460 × 269 269 457,0 457,0 25,4 25,4 343,0
HP 460 × 304 304 464,0 460,0 28,6 28,6 387,0
Table 6 — Wide flange bearing piles UBP
Designation Dimensions
M h b tw tf A
kg/m mm mm mm mm cm
UBP 203 × 203 × 45 44,9 200,2 205,9 9,5 9,5 57,2
UBP 203 × 203 × 54 53,9 204,0 207,7 11,3 11,4 68,7
UBP 254 × 254 × 63 63,0 247,1 256,6 10,6 10,7 80,2
UBP 254 × 254 × 71 71,0 249,7 258,0 12,0 12,0 90,4
UBP 254 × 254 × 85 85,1 254,3 260,4 14,4 14,3 108,4
UBP 305 × 305 × 79 78,9 299,3 306,4 11,0 11,1 100,5
UBP 305 × 305 × 88 88,0 301,7 307,8 12,4 12,3 112,1
UBP 305 × 305 × 95 94,9 303,7 308,7 13,3 13,3 120,9
UBP 305 × 305 × 110 110 307,9 310,7 15,3 15,4 140,1
UBP 305 × 305 × 126 126 312,3 312,9 17,5 17,6 160,6
UBP 305 × 305 × 149 149 318,5 316,0 20,6 20,7 189,9
UBP 305 × 305 × 186 186 328,3 320,9 25,5 25,6 236,9
UBP 305 × 305 × 223 223 337,9 325,7 30,3 30,4 284,0
UBP 356 × 368 × 109 109 346,4 371,0 12,8 12,9 138,7
UBP 356 × 368 × 133 133 352,0 373,8 15,6 15,7 169,4
UBP 356 × 368 × 152 152 356,4 376,0 17,8 17,9 193,7
UBP 356 × 368 × 174 174 361,4 378,5 20,3 20,4 221,5
UBP 406 x 406 x 131 131 389,0 398,0 13,7 13,7 162,0
UBP 406 x 406 x 151 151 394,0 400,0 15,9 15,9 188,2
UBP 406 x 406 x 181 181 400,0 403,0 19,1 19,1 226,5
UBP 406 x 406 x 211 211 406,0 406,0 22,2 22,2 264,0
UBP 406 x 406 x 242 242 413,0 410,0 25,4 25,4 303,7
UBP 406 x 406 x 272 272 419,0 413,0 28,6 28,6 343,1
UBP 460 × 460 × 202 202 445,0 451,0 19,1 19,1 257,0
UBP 460 × 460 × 234 234 451,0 454,0 22,1 22,1 298,0
UBP 460 × 460 × 269 269 457,0 457,0 25,4 25,4 343,0
UBP 460 × 460 × 304 304 464,0 460,0 28,6 28,6 387,0
Table 7 — Universal beams UB
Designation Dimensions
M h b tw tf A
kg/m mm mm mm mm cm
UB 127 × 76 × 13 13,0 127,0 76,0 4,0 7,6 16,5
UB 152 × 89 × 16 16,0 152,4 88,7 4,5 7,7 20,3
UB 178 × 102 × 19 19,0 177,8 101,2 4,8 7,9 24,3
UB 203 × 102 × 23 23,1 203,2 101,8 5,4 9,3 29,4
UB 203 × 133 × 25 25,1 203,2 133,2 5,7 7,8 32,0
UB 203 × 133 × 30 30,0 206,8 133,9 6,4 9,6 38,2
UB 254 × 102 × 22 22,0 254,0 101,6 5,7 6,8 28,0
UB 254 × 102 × 25 25,2 257,2 101,9 6,0 8,4 32,0
UB 254 × 102 × 28 28,3 260,4 102,2 6,3 10,0 36,1
UB 254 × 146 × 31 31,1 251,4 146,1 6,0 8,6 39,7
UB 254 × 146 × 37 37,0 256,0 146,4 6,3 10,9 47,2
UB 254 × 146 × 43 43,0 259,6 147,3 7,2 12,7 54,8
UB 305 × 102 × 25 24,8 305,1 101,6 5,8 7,0 31,6
UB 305 × 102 × 28 28,2 308,7 101,8 6,0 8,8 35,9
UB 305 × 102 × 33 32,8 312,7 102,4 6,6 10,8 41,8
UB 305 × 127 × 37 37,0 304,4 123,4 7,1 10,7 47,2
UB 305 × 127 × 42 41,9 307,2 124,3 8,0 12,1 53,4
UB 305 × 127 × 48 48,1 311,0 125,3 9,0 14,0 61,2
UB 305 × 165 × 40 40,3 303,4 165,0 6,0 10,2 51,3
UB 305 × 165 × 46 46,1 306,6 165,7 6,7 11,8 58,7
UB 305 × 165 × 54 54,0 310,4 166,9 7,9 13,7 68,8
UB 356 × 127 × 33 33,1 349,0 125,4 6,0 8,5 42,1
UB 356 × 127 × 39 39,1 353,4 126,0 6,6 10,7 49,8
UB 356 × 171 × 45 45,0 351,4 171,1 7,0 9,7 57,3
UB 356 × 171 × 51 51,0 355,0 171,5 7,4 11,5 64,9
UB 356 × 171 × 57 57,0 358,0 172,2 8,1 13,0 72,6
UB 356 × 171 × 67 67,1 363,4 173,2 9,1 15,7 85,5
UB 406 × 140 × 39 39,0 398,0 141,8 6,4 8,6 49,7
UB 406 × 140 × 46 46,0 403,2 142,2 6,8 11,2 58,6
UB 406 x 140 x 53 53,3 406,6 143,3 7,9 12,9 68,0
UB 406
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.